printer Brother MFC-J6910DW loaded onto PC Dell 9300, shared on the network, running windows 7 on Toshiba Satellite laptop, it cannot find the printer cannot print. ,

other home computers can find and print on the Brother MFC-J6910DW, but my Toshiba laptop cannot find or print. How can I fix? Not too much computer.


Thanks for posting your query in the Microsoft community!

I understand that you can not print on a network share. I will try to help you with this question.

(1) did you make any changes before the show?
(2) you receive an error message/code?
(3) what is a wired or a wireless printer?

I can't print from my computer over the network. (For Windows®)
Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
We can't wait to hear back on your part.

Tags: Windows

Similar Questions



    We do not know what you have already tried to do the job to the printer.

    Vista drivers are available on the site Web of Lexmarks the link above, to download.

    Go to the website above > drivers and downloads tab at the top > and follow the Options with your model number >

    Download/save the drivers compatible Vista on your desktop > uninstall/reinstall your printer according to the instructions of Lexmark.

    If you still have problems, contact Lexmark, as they are the ones who write drivers for the printer, not Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Error 80070002 on my Dell XPS 420 Intel Core2 Quad running Windows Vista

    I spent over 12 hours searching for and perform the patches recommended at this problem and... NOTHING WORKS!

    I see that other users of DELL/Vista suffer from the same problem.  I have not received updates automatic download from April 2!
    Someone at Microsoft PUHHHLEASE help?  I'm pretty computer savvy, but I have tried EVERY remedy recommended
    has failed.  Help, please!  Thank you.

    Hi Boludo78,
    Thank you for visiting the Microsoft Answers forum.
    Here is the link to re - install Windows Update Setup. But it will not solve your problem because you have corrupted system files that the utility could not fix.

    If the previous step does not take care of the issue you run a vista repair install. Although its recommended to do a clean install.

    You have a Vista DVD?
    You need to run a repair of the Vista installation.

    Here are the steps to do:

    1. insert the Vista DVD in the DVD player while your current Vista is running.
    WARNING: Do not start the computer and run the installation Vista system startup DVD. An upgrade installation doesn't work that way.

    2 click on install now to start the upgrade. (See screenshot below)
    NOTE: If the auto run does not load the Vista Setup screen, then open your DVD drive in the computer and click on the Setup file.

    3 if you want Vista to check updates during installation, and then click to select. (See screenshot below)
    NOTE: It will install more quickly if you select receive no updates to install. You can install them later through Windows Update.

    4 do not type a product key. (See screenshot below)
    WARNING: If you do not enter the same activated product key that you have already installed, then you can find yourself in a reduced functionality Mode. See: How to get out of the Mode of reduced functionality in Vista

    5 let the box automatically activate Windows when I'm online disabled.

    6 click Next.

    7 click on the No button for the you want to enter your product key now? command prompt. (See screenshot below)

    8 select which edition of Vista you have. (See screenshot below)

    9 check the box I choose the edition of Windows that I purchased and click Next. (See screenshot below)

    10 click the upgrade option. (See screenshot below)

    11 follow the instructions up to what Vista install and re-booted the final welcome screen on the Vista desktop.

    12 remove the Vista installation DVD.

    13. check if all files are missing. If so look in the files in bold shown in step 14 below to see if they are there. You can then simply copy their return.

    14 run Disk Cleanup.
    NOTE: To learn how, see: How to use cleaning disc in Vista

    (A) if the list see records destroyed by upgrade Windows. (See screenshot below)
    NOTE: These will be files remaining upgrade, C:\Windows.old, C:\$INPLACE.~TR , and C:\$WINDOWS.~Q, which did not copied. Is it missing from the files of user name, it would be in these files.

    (B) click OK to remove.

    15 now, all you need to do is activate Vista.
    NOTE: To learn how, see: How to activate Vista normally and by Activation of the phone

    (A) right click on computer (Start Menu) and click Properties, or open the control panel (Classic view) and click on the System icon.

    (B) scroll down a bit and click on: Activate Windows now. (See screenshot below)

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Toshiba Satellite Pro 4600; Cannot load Windows.

    A friend recently gave me a refurbished from this laptop model that has been updated with Windows XP Pro and it worked for about a month before a windows system file has been altered. I got a new OS disk and I replaced the file and it worked fine for another month, and when I started it today, it gave me a message saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "and gives me a list of options to reboot. I have not installed anything or nothing changed.

    I also tried each of the options and none work. I get a blue screen that flashes for a split second and then he returned to the screen with the restart options.

    I tried to go to the BIOS menu and setting up for her to start from the cd drive with the OS disk instead of try to reformat and I get a screen with a short message that says ' Media Test Failure. Check cable"and then returns to the screen with the with the restart options. I'm running out of ideas and anything online that I could find so far has helped. If anyone has any ideas at all, I'd like to hear them.

    I want to reformat completely this laptop if it is not too late.

    Any help would be appreciated. Thank you very much.



    Media Test failure. Check cable message appears because cell phone trying to boot from LAN.
    Maybe the laptop trying to boot from LAN because the HARD drive is no longer available it could be possible
    Have you checked the HARD drive in the BIOS? Please do!
    Check if the HARD disk is available in the BIOS
    If it s not appear not in the BIOS, then the disk HARD is dead and must be replaced.

    PS; You can also change the order start F12 press when the laptop starts upward. Then all the possible boot devices should appear on the screen and you can choose the CD/DVD drive as the boot source.

  • My Brother MFC-7840W is taken offline.

    My Brother MFC-7840W is taken offline. I have a wireless network using windows 7 and a cisco wireless router.

    A few times just go offline.  How can I get online? or why it is happening?


    1. when exactly you get this error message?

    2. don't you make changes to the computer until the problem occurred?

    3. What is the number of brand and model of your printer?

    I suggest you try the steps from the link below and check if it helps.

    Method 1: Try to follow the steps below and check if it helps:

    a. open the start menu, click Control Panel, and click on the "printers and faxes". This will open a window with a list of the printers currently installed on your computer.
    b. double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.
    c. go to "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

    Method 2: Try to run the fix it from the link below.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

    Method 3: If the problem persists then uninstall and reinstall the driver of printer on your computer from devices and printers and programs and features.

    Step 1: To uninstall the driver scanner devices and printers:

    a. click the Start button, select Control Panel and click on devices and printers. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. right-click on the printer driver, and then click Properties.

    c. on the device properties dialog box, click the driver tab, and then click on uninstall.

    Step 2: To uninstall programs and features, follow the steps in the link below:

     Uninstall or change a program

    Download the last set of drivers from the link provided below.

    Note: Restart your computer. This should install it automatically a suitable driver for it.

    You can also check out the link below.

  • Brother mfc-8500 will not print vista computer

    My Brother MFC-8500 connected to an XP desktop on my home network does not print from my Vista computer on this network. He tries (when I try to print a test page, the printer wakes up-upward and sounds like it will print then goes quiet without printing).

    Thank you in advance for any help you can give me.


    You did it changes on the computer before the problem started?

    Try the following steps:

    Step 1: follow the steps in the article below.

    Step 2: uninstall and reinstall the printer.


  • Installation of the Brother MFC-240 c failure

    OK, so I installed a printer/scanner/copier (Brother MFC-240 c) and my (Dell Studio 1749) system became slow insainly! so I restarted. then the Windows Aero effect disappeared and that basic services has begun. so, basically is started in Mode safe without the trunk. I couldn't do anything requiring a parameter system, or something of the sort. I tried to restore it and I got a message that the required services could not be started! that has been the standard message for everything. I got it somehow to start as it should, but now Kaspersky is sayign databases are corrupted and I can't understand it. Well. But what I would do if it were to happen again? I finally restored the 17/09/10 somehow. IM fine with the way it is now, but I want to what to do if that should ever happen again, and what I can do to prevent it. any help would be amazing! Thank you!!!


    ·        You are able to use the printer on the system?

    I suggest you follow the steps mentioned below.


    Method 1:

    I you suggest to uninstall the printer from the system and perform a clean boot, and then install it and check.

    Step 1:

    Uninstall the system printer.

    Step 2:

    To perform a clean boot follow the steps mentioned in the link given below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Follow step 7 to start the computer in normal startup.

    Step 3:

    Reinstall it on the system.

    See the article mentioned below.

    Install a printer

    Method 2:

    I suggest you to optimize Windows 7 for better performance.

    OptimizeWindows 7 for better performance

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install the 720 printer dell laptop toshiba satellite

    have a toshiba satellite laptop and I am trying to install a dell 720 color printer. I have the installation CD in the computer, but when even it is said there is no available drivers and does not connect.


    Please see if Rick here thread

    on the Dell Community aid.

  • ADF - Brother MFC-9970-CDW

    How can I get Acrobat DC to use the ADF on my Brother MFC-9970-CDW.  At present it by default, the flat bed scanner.

    Maybe the scanner is not set to automatically detect the ADF pages. Try the following steps to configure this manually:

    Pass scanner-> custom scan and click on the Options button next to the drop-down list scanner

    The User Interface "Interface of the Scanner Show Native" value and click OK. Then click Scan to start scanning...

    When the Brother MFC Scanner window opens, choose scan ADF mode.

    This will set your scanner to scan always with this default setting.

  • Toshiba Satellite C55-B5362: how to scan multiple pages in a 1 paper for printer HP Photosmart 6520?

    I use Windows on a Toshiba Satellite C55 B5362, 64-bit version 8.1 and have printer HP Photosmart 6520.  This is a new printer for me.  I have scanned multiple documents to discover that they were recorded on the computer individually instead in a single document.   How to scan multiple pages in 1 document?

    Thanks for any help!  Please let me know if any additional information would be helpful in order to answer you.

    Hello dru98,

    Please click HERE to access the procedure which should solve the problem.

    PS: Expand ""How to scan with HP software " and"How to scan an original of several page into one file " "

  • Wireless printer does not work with the laptop running Windows 7

    Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

    The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer:
    They also have diagnostic utilities that can help:

    and the additional support:

  • That I can't connect my Brother MFC-490cw, for my Dell Inspiron/sprint 3 g

    I am trying to go wireless, of my Brother MFC-490cw, for my Dell Inspiron mini/sprint 3 g. Can you help me?


    Have you read the instructions or the documentation that came with the printer. Each printer is a little different in terms of how to get it ready to use wireless. If you don't have the original documents, I would say go to the website of Brother and check it.

  • "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

    I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

    Yes, you can try to replace localspl.dll winprint.dll

    Create a restore point from the system beforehand and restart the computer later.

  • Brother MFC-L27000DW do not wake on print

    Just bought a Brother MFC-L27000DW and have problems make him wake up when printing to it.

    I have a Windows7 machine and it seems to have no problem to wake the printer to sleep deep whenever I have something down the print queue send to her. El Capitan however doesn't.

    I downloaded the latest drivers from brother and can get the printer to work if I put it off and then on again. But I can't seem to print from El Capitan by sending something to the queue printing after that he went to sleep.

    I wireless print and there is no wifi connection problem because it works very well after completing the printer.

    Update for this. After having frustrated and entertaining the idea of returning to the printer, I called brother support.

    They walked me through the process of updating the firmware on the printer and now everything works normally.

    Impression of something of El Capitan it will send to the queue printing and the printer will wake up from deep sleep and print normally.

    Everything is good.

    In case anyone want to know the details, you can press on the ' *' and ' # ' at the same time the keys on the keypad of the printer and see your firmware version. My long string of digits began with an 'H' and the latest driver from 11.1.2016 is 'J '.

  • I can't on my Brother MFC-9325CW printer - everything comes back as a mistake and remains in the queue

    I installed my printer Brother MFC-9325CW, and it will not be printed.  Whenever I send a document to the printer, it reads like a mistake and remains in the queue as an error.

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your. ' t-work correctly? SignedIn = 1

Maybe you are looking for

  • Firefox crashes whenever I open it - Crash ID: bp-9fea3d59-98d1-46b3-aa83-89f392140208

    Help, please! I have tried almost everything, nothing uninstall and re - install, permitted, however. Thank you

  • duplicate name exists on the network: can spy on me

    I get this error message on an existing when duplicate name that I start. I read the patches for this, but what I'm wondering is... Assuming that the name "duplicate" is another computer, we are related in any way other than by name and network? I wa

  • WRT54G2 v1 broken web interface

    Sorry my bad English. My problem: in the web interface broken router (some items hide / present or not): see puctures in pic2 you see - upgrade button to hide... I can't upgrade or rewrite the firmware. I am trying: try to rewrite the firmware of the

  • Photo964 but no all-in-One Center

    After installing the software, get the updated drivers and try your tip on ABBYY (in OCR).  I don't always have the Dell all-in-one Center.  I can scan, but it made it difficult to have to go to control panel, then click on the printer that shoots to

  • jQuery Ajax error on device but works in Chrome

    Hello I make one an Ajax call for page on jQuery http://somewebserver/leap.aspx. When I run my application of http://localhost:53754 / index.html in Google Chrome, it works fine, no errors. But when I build and install it on BB Z30 in debug m