Printer cannot find the network

Similar Questions

• Printer cannot find the network (iPad)

  HP3050A can't find my airport network. I'm trying to print from the IPad displays-there of printers available in configurations

  OK, I did a bit of homework on this and spoke to the team of Mac here at HP.  The iPad can not implement it (and a few other HP wireless printers) to connect to your wireless network.  I'm sorry.

  You'll have to borrow a computer to configure the printer.  Once configured, your iPad can use very well.

  When you get the computer home, first, click the button on the front of the printer wireless and choose the default settings.  You will have a time of this point for the installed printer.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• B209a printer cannot find the new wireless network

  Let me start that I am not very tech savy to start so I read other discussions related to this and could not find a snwer to solve my problem.

  I upgraded my router wireless internet 10 days ago and since then my printer cannot find a wireless connection. That's what I've tried so far, I tried to restart the printer, unpluging it and pluging reconnect, restart my router, myrouter to reset (which knocked my internet at home for hours). The rest of my Office Home phones and cell phones all pick up my network, but my printer can't seem to find it. He said only: "No connection found" on the touch screen.

  I run a wireless network Test report, and he says that he cannot find a SSID. But when I printed on a Page of Configuration of HP network it states that he discovered 5 networks, including mine.

  My wireless router is a rhythm. I have not installed it, did the tech from my service provider. He seemed brand new. I have no way to update its firmware (whatever it is).

  Any help would be appreciated.

  I have solved my problem after reading this thread. http://h30434.www3.HP.com/T5/printer-networking-and-wireless/Photosmart-plus-B209a-won-t-connect-to-wireless-router/m-p/177144#M7026

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• c4599 printer cannot find the specified file

  PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe downloaded and tried to install c4599 printer.  Error system cannot find the specified file "BlockSysUserInstall.exe., which is located in the Temp directory  I noticed that he keeps referring to a coded hard "7zS2F4B."  Have you tried renaming the file in the Temp directory to "7zS2F4B" but still no installation.

  Hi foberg,

  Looks like you have some problems with the operating system installed on this computer. Try the following steps to see if that helps.

  Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.

  This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.

  1. Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
  2. Click on the Control Panel menu option.
  3. When Control Panel opens, you will see a screen similar to Figure 1 below.
     Figure 1. Windows 7 Control Panel

• Adding HP ePrint home and Biz iPhone app - mal printer cannot find the email address of the printer

  I'm trying to connect my HP Photosmart c6380 to my iPhone. I have already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.

  When I go to 'Manage ePrinters' and try to add a printer with the + button I see 3 choices:

  Add x to list: "no available ePrinters.

  Manually add: I can't find the printer even email address using the instructions available on the ePrint centre.

  Add the WiFi network: my printer is not shown in this list, so it does not support Autodiscover.

  So I guess that if I could just find email address of my printer that would connect to my iPhone for wireless printing, but I can't for the life of me find.

  Any help is greatly appreciated.

  Thank you.

  Hello amybett,

  I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint capable home and Biz iPhone app, it didn't need to be Airprint/Eprint, as it is connected to the same network as your phone.

  Here are the steps that you want to print something:

  1. installation of the application by filling in the electronic registration and entering the code (which I believe you have).

  2. Select the item you want to print by using the menu in the application (Photo Albums, files saved, Web browser, etc.).

  3. Once you select the item, you should see article and a big button "Print" under him.

  4. If the printer you want to print to is not listed above the 'Print' button, select the icon on the right (key/computer), and then select the printer you want to use (and other parameters).

  5. press the button 'Back' at the top left, then tap "Done" (blue top-right button) and then press the 'Print' button to print your article.

  Let me know if you still have problems after following the guide above.

• Printer cannot find the SSID

  This morning the power on the wall where the router is plugged is out. I fixed it and was able to get back on the internet. Problem is that the wireless printer does not work. When I reinstall, my network SSID is not displayed in the available choices. And when I go in the type manually, it can't find it. I'm on the internet. My good names will be displayed. I even went my router page to check these settings. I uninstalled the printer and reinstalled.  I get the same.

  Connectivity report shows the network name (SSID Found)... IN CASE OF FAILURE

  Yet, the networkname is listed in the current configuration of the report at the bottom section.

  Report says also that wireless is enabled and works.

  Why is it not appear?

  In fact, I just changed the name of the SSID and he appeared.

• HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

  HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

  After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

  Hello:

  Follow these steps, and I'll post the link to the wireless driver you need...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Cannot find the network-

  Hello - my laptop has a Wi - Fi connection and net access.

  For a long time, I was using the laptop with the wireless connection. My router assigned 192.168.1.237 to the Wi - Fi connection.  I was able to map the disk on the laptop and remote access.

  A month ago I connecting the laptop to my home network via a wired connection to 192.168.1.172 - once again, I make me connections to and from the laptop.

  Now, I disconnect the wired connection and now the laptop seems to have trouble finding the other computer on the network or if the laptop can be found

  computer too.

  Don't know if it's an OS problem or a problem with my router and DNS - any suggestions on how to get the laptap back on the network with the

  WiFi would be appreciated.

  NO, but a password is required to connect to the wireless network.

  You must have a cryptographic, or otherwise you wouldn't need a password.  If there is no encryption configured in your router, where is the need for a password from a?

  Determine the IP addresses of other devices on your network (for Windows computers, run an ipconfig command in a command prompt window).

  They should all be a 192.168.1.xxx where xxx is greater than 1 and less than 254.  Are they?

  Open a command prompt window and type

  Ping

  What is going on?

  Given your description of what works and what does not work, I can only think of two possible explanations:

  • Some firewall 3 rd-party blocks wireless connection: what security software is installed, including your antivirus program, any firewall program, any program antimalware, etc.. ?
  • You are currently connected to the network wireless to a neighbor with the same SSID (network name).  It would be very likely if you, indeed enter a password to connect wireless

• Cannot find the network on HP Pavilion

  Hello
  I don't find my network wireless on my HP Pavilion. It lists a whole bunch of other networks except me. Ive tried unsuccessfully to troubleshooting.
  It was fine this morning and I have wireless on my phone, so it's the computer. My product number is E4X87PA #ABG. Any help would be greatly appreciated.
  Thank you
  M

  Hi @MaryamCD

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about wireless problems you are having with your Pavilion. Have you tried to connect to any of these other networks to make sure that your wireless network is able to connect and funtion correctly? In general, if you can see the other networks it could be something on the network at the origin of the problem. If you have not had the chance to unplug your wireless router and the model please do. Leave of them disconnected for 30 seconds, and then reconnect hide them in. Then see if you can see your network again.

  What operating system do you use? What have listed it under network adapters in your device manager? What is the product number for your Pavilion?

• X 220 - WDS - cannot find the network card drivers - help!

  Hi guys

  I have a laptop computer X 220 here and try to use the Windows deployment server to deploy Windows 7 Pro SP1

  Ive downloaded the drivers support page and copied in the boot.wim to the installation.

  whenever I run the PXE boot it telling me network adapter drivers not found.

  Ive google and tried several other drivers for the NETWORK card intel 82579LM nothing works.

  any ideas?

  advice or assistance appreciated.

  Thank you

  OK incase others are looking, I used these drivers: http://www.symantec.com/connect/downloads/latest-intel-nic-drivers08042011-not-present-windows-pe-de...

  and now everything works!

• Cannot find the network driver

  Hardward Ids:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C & REV_05

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2AB7103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  HP slimline E5000

  s5716f

  Windows 7 ultimate 32 bit

  Installed several drivers failed

  Help, please

  Hello

  You have problems because of the drivers didn't like these drivers belong to Eathernet port

  You can connect your Internet if not fallow the steps

  1. go to Device Manager and uninstall and reinstall the driver for the network card

  2. after having what its still the same try doing system recovery fom F11

  3. always if it's the same problem the motherboard needs to be replaced because the port net eather is part of the motherboard

  Thank you & Regarsd
  Dinesh Kumar
  * Click on the thumb BRAVO upwards on the left say "thank you."

• C4780 wireless printer cannot find the access point

  I have c4780 wireless printer.  It will print fine using the usb connection, but has never printed wireless.

  PC operating system is Windows Vista.  Wireless router is the linksys WRT54G.  The printer does not see the access point.  The security mode of the router is WPA Personal.  I have a unique SSID.  ISP is Timewarner Roadrunner.

  How do I get this to a wireless connection?

  Try this firmware update.

  In addition, sweat you are broadcasting your SSID and not using MAC filtering.