Printer continues to stop & requires the system restore?

We noticed a delay problem where printer stop printing.  What happens with XP and Windows7, but they show different symptoms:

With XP, the printer also show online.  However, to get anything to print.  It affects all users, is not corrected by updated printer spooler restarts, restart, change USB port, cable changes or printer resets.  No errors in the logs.

With Windows7, printers go offline or completely disappear and stop the spooler.  You can restart the spooler and printers reappear for a short period, but they disappear in a few seconds.  As noted above, nothing seems to correct the problem.  It's just generic elements in newspapers, but nothing specific.

The only thing that solves the problem is a system restore?  We can link to problems individuals patch.

Does anyone else know this?

The only thing that helps for XP and Win 7 is the system restore?  Looks like corrupted printer drivers (even though it's a bit strange that you experience on the two operating systems).

Simply download and install a fresh printer driver is not enough.  You have to clean the old one.

For XP, see His Article.  The critical step is step 4.

For Windows 7, replace step 4 with the following text:
Restart the print spooler
Open devices and printers
Select a printer (click only)
Click the print server properties in the toolbar at the top of the window
Click the tab drivers
Remove the suspect drivers

If you can not do what the above because the print spooler is not running, after return and specify which version of Windows 7 you have.

Tags: Windows

Similar Questions

  • Can't do the system restore

    I had problems with printer (what else is new?!) for the last 2 days. It will print the test pages, but something else, that I try to print I only get a white paper that passes through. I contacted HP, after all, trying even uninstalling and reinstalling, but nothing has worked. I thought maybe I could do a system restore on the 15th, but I get a restore without success. There isn't any number of error message just a short message saying that it was impossible to complete the restore of the system. I've never had this problem before and I am really frustrated! Help!

    Thank you

     

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Printer problems:

    http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

    Solve information problems the printer at the link above.

    http://support.Microsoft.com/GP/printing_problems

    Read the information above from Microsoft about fixing printer problems.

    There is a very useful 'Fix - It' there as well as a list of what it fixes.

    http://support.Microsoft.com/kb/2000007/en-us

    Solve printing problems by resetting the print spooler

    I hope that the information above solves printing problems you encounter.

    See you soon.

    .

    Mick Murphy - Microsoft partner

  • Unexpcted the system restore error

    When I try to use the system restore, I get this:

    There was an unexpected error.  Class not registered (0 x 80040154).  If please close the system restore and try again.

    Only tent still once does not work.  It gives me just the same message.  How can I fix it?  I have run the checker system files & nothing damaged were found.  I am running Windows Vista Home.

    Thank you in advance for your help!

    Hello

    This can help you:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    AVG will cause problems with SR too.

    «Temporarily disable AVG»

    http://www.Avg.com/ww-en/FAQ.Num-3857

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • The system restore failed. Error message (unspecified error occurred during restore).

    The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

    Nortonn, McAfee etc often stops system restore:

    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    Run more high tool ot remove all McAfee.

    1. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    2 Malware will stop at the system restore:

    If necessary, do all the work Safe Mode with network.

     

    To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • What is the next step after an unspecified error occurs during the system restore

    My computer shuts down saying windows has been shut down to avoid damage.

    disable or remove all equipment recently installed software.

    System Restore does not complete successfully.

    How can I find the dates various programs have been installed. I can find the programs, but not the date they were installed.

    The problem began in mid-September, so I would like to search by dates.

    I have dates for updates to windows, but not programs other than windows.

    Hello

    This can help you with problems with the system restore:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    See you soon.

  • When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

    When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I try to use the system restore I get an unspecified error response

    Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

    Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • Problems with the system restore

    Try to restore system using System Restore.  getting the error "system restore was not entirely successful.  The system files and settings on your computer did not change.  Details: An unspecified error occurred during system restore.

    Have tried several times and get the same result.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

    I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

    If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

    System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

    Remember that the system restore is not a time machine.

    Your system is currently or has been reached by malicious software.

    You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

    The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

    Just fix the immediate question:

    Looks like your file jscript.dll became somehow not registered so you can re-record it.

    There are probably a few other things that do not work you know yet, so fix them all at once.

    Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

    Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

    regsvr32 jscript.dll
    regsvr32 vbscript .dll
    regsvr32 /i mshtml.dll (it's a look of slash)

    The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

    Now check your timetable for restoration of the system and/or the user account settings page.

  • Blue screen on startup, the system restore / repair did not work?

    Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

    I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

    Will be saved my files / is there a way to fix this? Thank you!

    Hello

    You can save your files by putting the drive in another computer as a 2nd disk (best) or external
    Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
    Of course a real store of the computer or the manufacturer of your system can help to recover the files.

    Or you can use a boot Ubuntu CD to back up data.

    Use Ubuntu Live CD to backup files from your Windows computer dead
    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

    --------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.

    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Pavilion 2000: Using the system restore

    I used the system restore in the past and I know it took a few hours to complete with good results, as it eliminated the problem. Last week, I used the restoration of the system, the screen turned blue and the restoration began however this continued for more than 3 days!  I was unable to use my laptop for so long. I saw a blue screen with an icon swirling in the Center. Miraculously, the day 4, he came back to life, but immediately began to update the apps I had checked to only not to do. It took an extra day. Actually, now it's back to normal. I am now afraid to use the restoration of the system again. What I've done wrong?

    Hello

    Thanks for posting in the HP Support forum.

    Could you provide your full computer model - information can be seen from the service tag sticker > > http://h30434.www3.hp.com/t5/Miscellaneous-Topics-Read-Only/Advice-for-asking-the-quot-Very-Best-Question-quot/td-p/83280 ?

    Could you confirm your OS - is this Windows 8/8.1 now?

    I see your previous thread in the attempt to upgrade to W10...

    I'm not sure about what you were wrong (if anything), but

    System Restore is a feature of Windows that usually takes minutes (30 minutes max) in full, not hours, not days. It restores the Windows registry, files/settings of the system to a previous state and is generally quick.

    Do you mean the system recovery or system reset/refresh?

    These are different things. These restore original Windows or format partitions on HARD drive - it can take an hour or 2-3 max but not days.

    If these (especially system restore) lasts days, there is indeed something wrong with the operating system.

    Looking forward to your confirmations.

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • Is the system restore wiped XP Recovery disk space?

    I definitely OE deleted messages, and then wipe the hard drive.  I need to do a restore of the system because of an annoying popup Windows start happened after deleting some files after you uninstall an HP printer.  A system restore will cancel the changes on the hard disk, allowing thus the recovery of these messages permanently deleted using Recuva or another program recovery?  That I don't want to happen as I am to get rid of the computer (I bought a new).

    If you you debarrassez of your PC anyway, why not simply wipe the hard drive with a program of format-based security (Google can help)? Even if the system restore does not return emails, there is still a lot of information on this computer, so that you can not someone else access using a different type of deleted file recovery program. Never made a purchase online? Access your bank account? May make changes to your social security account or 401k? It's all there somewhere.

    If this a brand like HP or Dell PC, you should have a recovery or disk partition which will allow you to restore the first day.  Which will be enough to thwart the average snooper a little better than average.
    If it's not, and you have the OS disk, you can wipe it off yourself and do a clean install.

    SC Tom

  • Undo system restore option is failed upwards in the system restore menu.

    Original title: Undo system restore?

    My sound doesn't work on my windows XPS, I did a system restore, but not to the point of restoration before the sounds stopped working because it didn't go that far back. but now, I want to cancel the system restore because it has messed up my computer, but undo system restore is not an option in the menu of system restore. What should I do?

    Hello

    1. were you running safe mode system restore?

    Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

    I suggest you to refer the link below which will help you put the sound on your computer.

    No sound: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

    Hope this information is useful.

  • You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

    I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

    OK you have an ETHERNET cable? (cable for PC to the Modem)
    What OS do you have?

    Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

    With the ethernet cable, connect one end on the XBOX and one end to your laptop.
    You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

Maybe you are looking for