printer Deskjet 6122 problem

Similar Questions

• HP Deskjet 6122: Problems printing to my HP Deskjet 6122 after upgrade to Windows 10

  Hello

  I used the above printer on Windows 7 OS by downloading the driver for the HP Deskjet 990c printer and it worked well.

  After that I had upgraded to Windows 10, I wasn't able to find the printer printer & devices on the list.

  The icon appears very much (like HP990c), but when I try to print, it is just straight up with an error message.

  The ironic part is that I have a 1220C HPDekjet, who is an older printer, and which has been added successfully as a new printer and prints well.

  Optionally you can give guidance will be highly appreciated.

  Hello

  I'm afraid that the HP Deskjet 6122 is inompatible with Windows 10, it is no longer supported on Windows 8 or any later operating system.

  You can find this information below:

  http://support.HP.com/us-en/document/c04658195

  Kind regards

  Shlomi

• Printing Deskjet 3650 problems

  I have problems to my 3650 Deskjet to print correctly.  My drivers are up to date.  My operating system is Windows XP and I get no error message.  I have new cartridges which are dated September 2014 and are subject full set aside.  I cleaned them several times but always lines through colourful pictures as if heads were dirty.  The printer is used almost daily.  I suspect the defective cartridges but can be seen on something else.  This problem did not start immediately when the cartridges were installed and aligned.

  Hi kemdlm,

  I'm linking you to the manual of your printer.  Click here  If you select Maintenance, you will see options for:

  • Automatically cleaning print cartridges.
  • Manually cleaning print cartridges.

  I suggest that you select one of them that you did not and follow the steps.

  If it does not help your problem, you can go back to the top of the manual and select:

  • Troubleshooting and then print quality is poor.

  You can follow these steps to help improve the print quality.  Let me know how it goes.

  Good luck!

• printer driver another 'HP Deskjet C 990"which replaces the Deskjet 6122?

  Can someone tell me how to get the download for the other "HP Deskjet C 990" printer driver which replaces the Deskjet 6122 for Windows Vista 64? HP sends me everywhere, except at this link.

  I'm sorry you had a problem in downloading the driver 990c. (Shane_R) has a great post on how to download this.

  Here is the link for him. Let me know if it helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

• DeskJet 6122 prints only black

  I use a macbook pro with OX 10.8 and connected via USB.  When I print a diagnostic page, there is no problem.  When I try to print a photo using Photoshop, preview, etc.  All I get are black images.  I put in new cartridges, cleaning and reloading the drivers.  What Miss me?  This is something recent passing, I printed in color with prior arrangement.

  Thank you.

  Hello

  The Deskjet 6122 is no longer officially supported on OS X 10.6 or newer versions, due the generic driver use color printing is not available:

  http://support.HP.com/us-en/document/c01856359

  Try to install a 3rd party driver that supports your printer model and compatible with 10.8, HPIJS seems to support it.

  Be sure to intall one of the required 3 prior downloads following the printer Set Up instructions:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

  Hope that helps,

  Shlomi

• HP Deskjet 2540: Problem printing with HP deskjet 2540

  Hello world.

  I need assistance with my printer. Sorry but I am not English native language so I hope you will understand everything.

  I have a HP deskjet printer and Windows 8 2540.

  The problem is that when you're printing suddenly stops printing. But if I try to print single pages, it prints again.

  When it stops print anything in the print queue as if she have all the.

  It usually occurs with the PDF file.

  I tried to search on the hp support page and I followed the instructions about to disable the printer spooler because maybe can give problem while printing, I did it but when I tried to print again the computer give me a message like this "If you want to print you need to install a printer" but it is not uninstalled the printer, its status is "ready to print".

  Can you help me please? Because I do not understand, and he is not the first time that the printer give me problem while printing.

  Thank you and sorry for my bad English

  Viviana

  @ViviHika

  You are welcome.

  Unless you disable the print spooler service, it will restarts when you then start / restart the computer.  In almost all cases, it is a good thing.

  You can find the startup type control:

  Control Panel > display icon > Administrative Tools > Services >

  Services opens > defiler scroll down, find the print spooler > right-click on print spooler click >

  Opens properties > startup type: > select from the menu:

  • Automatic
  • Automatic (delayed start)
  • Manual
  • People with disabilities

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  You can, if you wish, change the options in the print spooler > Properties > recovery tab

  One of the most interesting Print Recovery options: restart the computer

  • Restart the computer may be initiated at the first, second, or one point of future failure.

  "Restart the computer" (without the clearing of the PRINTERS folder) can be used to stop and restart the spooler then (at startup).  The restart procedure could allow 'stuck' print jobs to resume printing.

  The option "Restart the computer" could be useful in a situation printing is a main function of the computer and the printer is supposed to work without supervision / outside normal office hours.

  When you configure the "Restart the computer" option, you can enable "actions for stops with errors."  For example, you can send a message to the computers on the network, which indicates the computer will be restarted within a certain time.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP deskjet 6122 s: print driver for hp deskjet 6122 s windows 8.1

  Hello

  I have a netbook gateway LT 41 P07 with a 8.1 - 32 bit operating sistem and I can´t get install my printer hp deskjet 6122 s.

  can you help me figure out a compatibility reader feel sistem for her

  You restart the computer after the add a printer process?

  As I said there is no direct drivers for your printer on Windows 8.1.

  To assign a different print driver in Windows 8:

  1. Hold your mouse arrow in the bottom right or at the top right, the screen to appear charms bar.  If you use a touch screen, you can swipe your finger from right to left.
  2. Choose the charm of the research.
  3. In the search box, click settings.
  4. In the search box, type devices.
  5. Click devices and printers.
  6. Right click on your printer.
  7. Select the properties of the printer.
  8. Click the Advanced tab.
  9. Click new driver.
  10. Click Next.
  11. Select HP in the first list.
  12. Select class driver of HP Deskjet PCL3 in the second list.  You can also use the Photosmart PCL3 Driver class, PCL3 Officejet class driver, Deskjet 990c or Deskjet 450 driver.
  13. Click Next.
  14. Click Finish.
  15. Click on apply to save the changes.
  16. Click OK to close the window.

  If it doesn't work on everything that you can do is download the installer of Windows 7 32 bit driver of the site then right click on the downloaded file and the compatibility mode.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=83027#n197

• Pavilion 500-223w: connection to a HP Deskjet 6122 printer

  Y at - it solution to connect my Deskjet 6122 to 8.1 Windows? It seeks to be supported only through Windows 7.

  [Personal information]

  There is in fact not a driver directly in Windows 7, the Deskjet 6122 is compatible with the printer driver Deskjet 990 c that is installed, as shown in the paper here for Windows 7.  For Windows 8.1, you can do the same, install the driver Deskjet 990c according to a similar process.

• HP Deskjet 6122 - my boss gave me this printer. How can I register.

  My boss has updated his printer and gave me his.  I added and it worked fine until I got a message that an update was needed, and when I checked yes, he cancelled the update and now I can no longer use the printer.  This printer can be transferred to another person?    I gave my home email address and would appreciate if you can cc my computer at work.  It is [text removed for privacy] please advise.  Thank you.

  Update: I did more research and found a suggestion to use the driver for the HP Deskjet 6940, who, after downloading and installing, got my work Deskjet 6122.

  Thanks for the help provided here.

• DeskJet 6122 print with only black print cartridge?

  I had this oldy but goody through local Freecycle (with two sets of ink!) list after knowledge full it works under Linux and openprinting.org it lists as working perfectly. Plug and play installation with Ubuntu, instantly recognized 14.04.

  I think it is indicated only by old-school print/head of cartridge type, but I should be able to use it with the black cartridge only right? I know most recent will force you to have both. I love that the cartridge for the price are very economical too.

  The Deskjet 6122 requires a black cartridge and electric sound color must be installed in the printer to print.  It is not necessary to have ink in all colors, but both cartridges must be installed.

• DeskJet 6122 on Windows 8

  Hello

  I'm trying to run a HP Deskjet 6122 printer via a USB connection to a computer running the Windows 8 operating system.  The operating system recognizes the printer as a device "not specified" and not as a printer.  There also 2 categories under the Hardware tab in the properties of the device - one that says "Print taken in charge USB" and one that says "hpdeskjet." 6122  Under "hpdeskjet 6122," by selecting the button "Properties" then the "Driver" tab and "Driver Details" button, it says that "no driver file is mandatory or were loaded for this device.  I want to use this printer on my computer Windows 8; is it possible that I can do this?  The site of HP lacks a selection of Windows 8 operating system option to get the drivers for this printer (it goes up to with Windows 7), but it is not in the list of printers that do not support using the Windows 8 operating system on the HP site.

  Sincerely,

  Michael

  I've updated the list of windows with windows update drivers. It took a while to download. Then, I selected deskjet 990c and installed. DeskJet 6122 works is fine now, no problem.

  Don't give up, there is always a way

• HP Deskjet 6122 and Windows 7

  I just bought a new Windows 7 laptop. My printer HP Deskjet 6122 USB plugged in, and it was recognized as not specified. 6122 driver windows update indicated that the alternative driver is the 990 c. install the 990 c driver, LPT1 used but no luck. Driver installs successfully but is not communicating with the 6122 printer. I don't want to buy a new printer, but it seems that the 6122 is not recognixzed by Windows 7. How can I get the 6122 to work with my new laptop windows 7?

  Simple answer is that LPT1 is parallel. You must correct this to USB. The 990C driver is correct.

  BTW > I have the same printer on Vista. You have the duplexer on the back?

  

• DeskJet 6122: Deskjet 6122 Error Messages

  With the help of another set of views, I am able to have my old deskjet 6122 impression of my new Dell running Windows 10 (64-bit).   HOWEVER, after a document is printed, it is now followed by a page that says

  GET /DevMgmt? ProductConfigDyn.xml HTTP/1.1

  HOST:

  over and over again.

  Sometimes it prints this page bonus first, then the document I want and then this bonus page again.  Other times, this bonus page just follow the actual document I print.

  Because this is wasting paper, ideas on how to stop this 'feature'?

  Thank you very much to those who can point me in the right direction!

  This answer has helped point me in the right direction, but my "fix" was slightly different.  For me, it changed the '2 Facer impression' to not installed.

  Basically, that's what I did:

  -Goto the printer folder and select the printer

  -Right click and select "printer properties".

  -Goto "the device settings tab.

  -Double-sided printing: not installed (previously was listed as installed)

• Incompatibility with printer DeskJet 3820

  Hello

  I recently bought a HP laptop (model Pavilion dm4) and have run into problems of compatibility with my printer DeskJet 3820. The advice I received in a dialog box to try to install the printer on my computer software are as follows:

  'Unsupported 16-bit application '.

  "Please contact the software vendor to ask that a compatible version of Windows 64-bit is available."

  I would be grateful to receive data from a provider that is appropriate to the United Kingdom.

  Thank you in advance.

  Margaret

  Install a different driver as described here.

• DeskJet 6122: W7 32-bit driver for deskjet 6122

  HP have deleted all the details for this great printer.  I'm stuck for a good driver I want to run it on a W7 32 bit PC now.

  Any thoughts anyone?

  TA.

  The Deskjet 990c driver available via Windows Update is an excellent match for the Deskjet 6122. Install the driver as described in the paper here.