Printer does not accept the new ink cartridges Hp cartridge is missing or damaged.

Similar Questions

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• MX472 does not recognize the new ink cartridges 1401 code

  I recently had to replace my cartridges on my MX472 and immediately after the installation, I got a code on the LCD of the 1401 and several beeps. This code means ink not installed. Therefore, I cleaned the contact strips with alcohol, did a hard reset hold the stop button for 5 seconds, another type of reset hold the button stop for 2 seconds, then press and hold the power button by pressing the key stop 5 times. I also unplugged the printer for 5 minutes with the cartridges from the printer and plugged, reinstall the cartridges and still not received the error code 1401 Check ink back. I went and bought another set of authentic Canon ink thinking that the first set was defective and still a no go on the second set. My printer is ready for the garbage? Its only 6 months!  Someone at - it other thoughts or ideas? Thanks in advance.

  Hi Gregg1,

  Since you continue to receive the error after you perform the troubleshooting steps you mentioned, the printer will require maintenance.  As you bought the printer in the past year, it is still within the warranty period; Please call or write us using one of the methods on the page contact us for further assistance.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

  Hello

  I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

  Thank you.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

• My printer says that one or more ink cartridge is missing or damaged when I installed new

  Why my printer say one or more of the ink cartridges are missing or damaged when I just installed a new according to the instructions?

  I'm sorry you have a problem with the new ink cartridges.

  You may need to clean the print head. He cannot read the cartridges correctly.

  What kind of printer you have?

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• iPad does not accept the new password for the new internet provider

  Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?

  Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password

• I deleted iphone error how can I back up to the top because he does not accept the news and says try again then tryagain?

  I deleted my iPhone by mistake. I want to restore it but it does not accept any ID code I give. help please

  If you have forgotten your Apple - Apple Support ID

  Find my iPhone Activation Lock - Apple Support

• HP Pavilion 15-ak120nb: HP does not accept the new ssd m.2 500 GB samsung 850 evo - M.2 500 GB ssd

  HelloW,

  I have a note book HP Pavilion 15-ak120nb QWERTY with a boot SSD disk original: Samsung MZNLF 128 HC HP - 000 H 1 of type m2. and it's more complete al. I bought an also a samsung Samsung 850 m2 of EVO - 500 GB SSD type. Once it has been installed the laptop did not recognize the new boot disk? It is not vissible in the BIOS. How can I solved this problem please? I post a picture of my new 500 GB of disk ssd. Someone at - it a step by step explanation how to do the replacement?

  I don't know anything about computers

  Ah. I was poorly expressed.

  Go with SHIFT + X as he suggested.

• printer does not recognize the new cartridge installed

  How can I get my HP deskjet printer to regonise I installed a new HP cartridge.

  Had to replace 2-magenta fine;  black photo (2 new cartridges tried) message-no ink.

  Have cleaned the contacts on the cartridge & printer. still no joy. What can I do next?

  Hello! Had a second go to cleanup & reinstall & all works well.

  Thank you!!

• HP 2050 does not accept the hp original cartridge recommended

  Hello! My HP deskjet 2050 all-in-one works very well under windows xp professional until the cartridge ran out of ink. As advised I bought an original HP 301 cartridge but the printer always tells me that the cartridge is not usable in the current configuration?

  As I need the printer, I hope you can help... Thank you!

  You are welcome.

  When you call HP, you must have with you:

  1. A complete set of in the cartridges of the warranty for your current region.
  2. Your printer.
  3. The computer connected to your printer.

  As long as the printer or the ink cartridges are under warranty, there should be no charge.

  In the United States, you can call 1.800.474.6836.  Find from other telephone numbers see Contact HP worldwide.  Do you have a good weekend.

  Good luck!

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.