printer does not print, it says error: 0xc18a0307

Similar Questions

• Press does not is to say double touch works do not enter

  I have hp touch laptop g62 pad does not is to say double touch works do not enter

  Hi Rishilathu,

  ·         When is this last work?

  ·         You did it all change to the computer?

  You can also consult on issues of FORUM HP for the TOUCHPAD on G62 according to the link below:

  http://h30434.www3.HP.com/T5/lockups-freezes-hangs/G62-touchpad-lock-stuck/TD-p/284533

  Update the form of drivers touchpad manufacturer's Web site and check the issue.

  Reply back with more information for you to help.

  Kind regards

  Kiki

• Tellable account, Abonoment unintentionally does not... say please account for extraordinary moments... I don't have the money. Please, now provide advice... I'm getting a reminder figures, however, Kathy Jezt notice! Now

  Tellable account, Abonoment unintentionally does not... say please account for extraordinary moments... I don't have the money. Please, now provide advice... I'm getting a reminder figures, however, Kathy Jezt notice! Now

  Pleas

  My account to the extraordinary moment give notice.

  Hereby, I have to interrupt the contract with Adobe creative Cloud.

  Please, calculating place, becoming thereafter paid...

  I need a confirmation notice.

  Hohre nothing in the two weeks of you Akzebtiere I have this as

  Silent notice of the contract with Adobe creative Cloud and Apps

  Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Does not open Acrobat DC - error "Acrobat failed to connect to a DDE server.

  Does not open Acrobat DC - error "Acrobat failed to connect to a DDE server.

  Hi mhantson,

  Try the solutions below: -.

  Solution 1) (this error occurs when you have more than 1 process of Acrobat running)

  • (1) go to the task by pressing Ctrl + Alt + Del Manager
  • (2) go to the process in the Task Manager
  • (3) terminate all processes associated with Acrobat
  • (4) start Acrobat again.

  Solution 2) open Acrobat access to menu help & repair installation.

  Solution 3) control the association of file on your system.

  Solution 4) course for HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and change the "AcroviewA11"key to "AcroviewR11.

  Kind regards

  Nicos

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• document does not accept the signature error message says cannot be signed

  I've set up a digital signature, but when applied to a document he sends it to 'save' and I get an error message saying document cannot be signed.

  I tried cancelling the signing and re compliant it but it still does not work. Suggestions please?

  A G Smith

  Signature must save. You who cancel?

• My mail does not download... error 8

  for reason of sum that my yahoo mail does not download... it says try again... error 8

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  The report please come back shortly.

• Satellite 5200-902 does not start and several errors

  Hello

  I had a serious problem with my computer.

  While playing a game, the screen become corrupt. It is difficult to describe but basically blocks of colors appeared on the screen and icons became corrupt, lines and points seemed and the screen seems to tremble. The stoppage, the office appeared, and then the corruption of screen appeared again. A Blue Screen of Death appeared, but I couldn't read what he says because the display corrupted again. The laptop then restarted. Ran scan disk and when the computer was upward and the performer said he had just recovered from a mistake serious etc etc. But he did not know what had happened to other than a general driver error.

  At this point, I backed up all my files on my external hard drive.

  The laptop was then suffer from the same issue of corruption to screen again and again, but apparently only after being on for > 5-10 minutes. This time, the BSoD said that it was my graphic drivers and specifically the NV4_disp.dll. So I restored my graphics drivers on the originals included with the computer, but the same error happens again.

  My DVD Multidrive had stopped playing CD a week or two before it (a problem that I was intending to settle). However, mysteriously it started to work again after the first error. So I decided that the only thing I could do was to restore the computer. So I did. However when he asked for the second CD to be inserted the drive does not recognize it (a series of jarring and whirs repetitive of the reader in the same way exactly, that it had been a week or two before; though even when it would not read anything else, would still read DVD about 40% of the time). I tried several times, but meanwhile, the corruption of the display is back!

  I had to cancel the process and the Multidrive still refuses to read the recovery CD and so the laptop computer simlpy cannot be restarted. The most concerning thing now is that the corruption of screen returned when I finally tried to start the computer with the recovery CD - text was corrupted and polyhedral and randomly on the screen. The laptop is now off.

  I fear that it is a hardware failure. I don't see how it could be a virus because one) my anti virus (Norton) was only two or three days from its last update and b) display corruption occurred still even after that the hard drive had been partially formatted by the restore disc, and Windows had not yet started.

  Does anyone have advice? The problem is that I can't boot from the restore disc (unless there is a way to boot from an external CD drive?) and given the corruption of persistent display, I am not yet convinced that that would solve the problem anyway.

  Thank you very much in advance.

  Hello

  I've read about similar problems with the graphic driver or the graphics card of the internet and it happened more often during the game.
  I think it might be an overheating of the graphics card.
  You know that the games are a heavy application that needs a complete service for laptop.
  All portable devices run in this case with a maximum yield and produce a lot of heat.
  I think that it could have a bad influence on the map. As you say the problem appeared after 5-10 min. I think that in this time, the temperature has been increased.

  So I don't know how to help you. I think you should ask the technician for the control of the laptop. Eventually the cooling module must be replaced and if the graphics card has a malfunction, in my opinion, it should be replaced also.

• Operating system does not start; F11 gives error.

  HP Pavilion dv7

  0xc000000f error code

  -does not start the o/s

  -not boot to safe mode (or whatever it is)

  -System gives error F11 recovery

  -friend did not restore system cd

  -OS is Windows 7

  I removed the hard drive and slave it to my office (using 2.5 USB cable).  The files are accessible except the \USERS directory is MIA.  If I can see the C: and D: (recovery partition)-

  Can I run the program on my desktop computer to create the recovery CD?  (faster you proceed your order/delivery/arrival)

  Other suggestions?

  Thank you...

  ACETech says:

  p/n: NM295UA #ABA

  Installation media (recovery dvd) was not made by the user.  That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office).  Thanks for the info, I can't do that.

  Will be there without you say the o/s?  It is not sure that vista or 7 32-bit or 64-bit.

  Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory.  It of funny, just might be blown away...

  It's Windows Vista Home Premium 64-bit with Service Pack 1.

  Here link to the specs page.

  Best regards

  ERICO

• X 64 Vista Home Premium CHKDSK does not end. No errors.

  I am running Vista Home Premium 64-bit and I get chkdsk runs whenever I start. It runs from stage 1 and complete with 9% of total. Then he will begin to step 2 and 55% of total and the program will stop. However, Windows will continue to start. The problem is that when I try a system restore, it fails and says that there is errors on the disk C: (part of Windows). I tried using F8 repair this computer option and get the same results. I bought and OEM "Vista repair disk" which looks exactly like the F8 option and she also does not terminate and the system reports errors on the restore disc. I tried the "right click on the hard drive" with windows to the top one and error-checking and it will plan a more late and ending. I got a call from the OEM Disk Checker 3.3 of the RS Software Lab disc verification program. I can get it to run and report errors, but I can't seem to fix. It will also schedule chkdsk to run pre-launch who did not finish. What can I do else?

  Hello

  You can follow the methods below and see if it helps.

  Method 1

  You can perform a clean boot to find with which service third is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2

  If the problem persists, you can browse the drive in safe mode check and see if it helps.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3

  If safe mode does the same thing, then start at the prompt of the WinRE and run the command chkdsk from there.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• My aulauncher.exe file does not connect. Says "internet connection required. Check your connection and try again. »

  I tried to get the center support dell back for a few days and it's getting a little old. I deleted my previous previous connection because of a problem with the internet connection.

  My computer is the Inspiron 14r, Windows 7 Home Premium 64-bit. Right now, I see the PcDr but only newspapers. One of the newspapers for the aulauncher says:

  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 228.2.2 - INFO-. OnInit - CMDLINE: "C:\Users\Ed\Documents\Downloads\aulauncher.exe."
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 229.2.2 - INFO - start aulauncher_6307_21.exe.exe - initialized record
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 231.2.2 - INFO - Spawn: 'false '.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 232.2.2 - INFO - Runonce: 'false '.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 233.2.2 - INFO - DontRegisterRunonce: 'false '.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 234.2.2 - INFO - LaunchedFromBrowserPlugin: 'false '.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 235.2.2 - INFO - BrowserParentId: "
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 236.2.2 - INFO - RollbackFailed: 'false '.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 272.2.2 - INFO - SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce\DSC3 key updater Runonce wrote. Value = "C:\Users\Ed\Documents\Downloads\aulauncher.exe' /launchrunonce'
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 301.2.2 - INFO - include CUSTOM_PLUGIN_FILES
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 21 AM - 302.1.2.2 - INFO - macro in CUSTOM_PLUGIN_FILES
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 309.2.2.2 - INFO - DetectDSC2 returned "
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 309.8.2.2 - INFO - detect DSC3 for previous version result: error: not found
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 309.28.2.2 - INFO - Final PreviousVersion: "
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 319.2.2 - INFO - installation dell_dellCodeSigning_1a95.cer result: success
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 330.2.2 - INFO - installation pcdcert.cer result: success
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 336.5.2.2 - INFO - installation dell_certfile.cer result: success
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 336.15.2.2 - INFO - installation pcdDellCert1946.cer result: success
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 351.2.2 - INFO - couldn't find any previous version of PCD
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 390.2.2 - INFO - OUTDIR: C:\Users\Ed\AppData\Local\Temp\nsp23F9.tmp
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 394.1.2.2 - INFO - macro in CUSTOM_FILES
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 22 AM - 394.3.2.2 - INFO - the call of the bios - plugin:getSystemManufacturer
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 23 AM - 394.9.2.2 - INFO - manufacturer detected as: Dell Inc.
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 23 AM - 394.12.2.2 - INFO - compare the result: "Dell Inc. '"
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 23 AM - 394.30.2.2 - INFO - specific files to extraction DSC
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 23 AM - 406.2.2 - INFO - UseSeedBdid: true
  wrappers/aulauncher. NSI - 13/11/2013:11:03: 23 AM - 432.2.2 - INFO - run: ""C:\Users\Ed\AppData\Local\Temp\nsp23F9.tmp\appupdater.exe"- install 6307 - title vo = install - n 'My Dell' - noautolaunch-guest" completed, failure, NoUpdate, WindowsUpdate "- s-precheck - check-run-yet once '"

  On the other hand, the journal for the appupdater says:

  2013-11-13 11:03:32 (INFO)-* AppUpdater logging configured for PID 8364
  2013-11-13 11:03:32 (INFO) - command line: - install 6307 - title vo = install - n "My Dell" - noautolaunch-guest finished, NoUpdate, WindowsUpdate, failure-s precheck - check-run-new
  2013-11-13 11:03:32 (INFO) - Current Working Directory = C:\Users\Ed\AppData\Local\Temp\nsp23F9.tmp
  2013-11-13 11:03:37 (INFO) - command line 'i' a build id: 6307
  2013-11-13 11:03:39 (INFO) - Normal contrast detected Mode
  2013-11-13 11:03:39 (INFO) - Normal contrast detected Mode
  2013-11-13 11:03:39 (INFO) - DownloadProtectedPublicKey (http://content.dellsupportcenter.com/mstr/current.xml)
  2013-11-13 11:03:40 (ERROR) - URL: http://content.dellsupportcenter.com/mstr/current.xml, download thrown exception: error of creation of the Web Proxy specified in the configuration section ' system.net/defaultProxy.   at System.Net.Configuration.DefaultProxySectionInternal.GetSection)
  at System.Net.WebRequest.get_InternalDefaultWebProxy)
  at System.Net.HttpWebRequest.ctor (Uri uri, ServicePoint servicePoint)
  at System.Net.HttpRequestCreator.Create (Uri, Uri)
  at System.Net.WebRequest.Create (Uri requestUri, Boolean useUriBase)
  to appupdatercommon.utilities.DownloadUtility.Download [T] (String url, HttpWebResponseHandler 1, ExceptionHandler onException, noCache Boolean, Int32 timeout, Int32 resetCount Manager)
  2013-11-13 11:03:40 (ERROR) - no download public key, url = http://content.dellsupportcenter.com/mstr/current.xml
  2013-11-13 11:03:40 (INFO) - ApplicationWorkerBase (appupdatercore.applicationworkers.CheckForUpdatesApplicationWorker). Have
  2013-11-13 11:03:40 (INFO) - UserAction (Accept) ^ taken under ApplicationViewState (CheckForUpdates)
  2013-11-13 11:03:40 (INFO) - Normal contrast detected Mode

  Can anyone make sense of this. I checked my firewall, proxy, etc, and it continues to be. I would like to know can I get y Del Support Center (aka My Dell) on my computer Announces work.

  Oh, by the way, I completely deleted all stray traces in the folder program files and my registry of any old My Dell on my computer, it has however appupdater in my startup probably comes with I tried to install with-aulauncher, but which does nothing (because it does not recognize my internet connection I have).

  Someone was able to solve this problem, or they can without having to reinstall the computer system that is not necessary, you might think.

  THIS SOLVED MY PROBLEM:

  I had the same problem on my Dell Inspiron 1526-Win Vista (32-bit). Aulauncher was not recognize my internet connection already running. He also got less resolved on June 15, 2014:

  (1) download & last saved "aulauncher.exe". He ran & received message 'Internet necessary connectione..'.

  (2) Went to Dell support & clicked on "find my service tag. The program downloaded and ran, and seems to do nothing.

  (3) now, I ran "aulauncher.exe" and it worked fine. After downloading, it ran the file and installed the software.

  I just started "My Dell" and it verifies my computer.

  [In fact it began to download a "dsc... exe" file (49-50 MB).] I have 3G connection was very slow & I got several error messages connection. I gave 'Retry' and the installer of the picked up Dell download directly from where he had been inturrupted. Thanks to the installer of Dell, so I had to not download the entire file each time.]

• Media Player does not work; message says to check the resolution and brightness.

  My computer just upgraded day and now the media player does not work. I use it everyday and it is a first.
  It says to check the resolution and brightness, and when I did they are recommended places.   Help, please!  Thank you!

  Hello

  1. are you referring to Windows media player?

  2. What is the exact error message?

  3. when exactly you receive this message? By playing any video/audio?

  4 does happen with a particular video/audio?

  5. have you made changes on the computer before this problem?

  If you use Windows media player, you can follow the methods.

  Method 1:

  You can run the fix - it from the following link.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2;

  Step 1:

  You can uninstall Windows media player. Check out the following link.

  Uninstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.

  Step 2 :

  Reinstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer and check the issue.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Post back with the results for you help more.

• Windows 8 does not start with an error code: 0x000000f.

  Original title: trouble with pc problem.

  When I start my pc which has windows 8 on it. It is said

  Recovery

  your pc needs to be repaired

  the application or the operating system could not be loaded because a required file is missing or contains errors

  File: \windwos\system32\winload. EFI

  error code: 0x000000f

  you will need to use the tools of recovery on your installation media. If you don't have any installation media (such as the disk or a usb device). Contact your system administrator or the pc manufacturer.

  I tried to restore and recover the system, but it did not work. reset does not work. I tried chkdsk via the command prompt, but it says "unable to forward the message recorded in the log of the events with the 50 State". I m not professional and my pc vendor has no me recovery CD too. What to do please help.

  Hello

  (1) a free trial of Norton or McAfee has already been installed?

  (2) you are able to start Windows via Safe Mode?

  (3) do you see this message when you switch on for the first time under Windows?

  As you do not have installation disks which usually (and should of!) come with the computer, please see the following article:

  Create an installation media for Windows 8.1.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Then, you can follow these steps which have been drafted by Sébastien M:

  a. Insert the media such as (DVD or USB key) and press the F12 key and click cdefault Hanger or any other option located at the bottom of the screen.

  b. in the next screen, click troubleshoot option, this will show you different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

  c. now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Let me know the status of the issue after following the steps above.

  Thank you.

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.