Printer does not print on the laptop wireless

I have a wireless computer notebook as a desktop with a router. I have been using an HP printer on the desktop without any problem but when I installed the HP on wireless laptop I can not get the printer to work. Any suggestions?

See the section "Accessing a shared folder or printer with Windows Vista"

File and Printer Sharing in Windows Vista
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

Windows Vista: networking
http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

Select the file and printer sharing
http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

What model of HP printer have you have, have you installed all the drivers for it on the laptop?

Tags: Windows

Similar Questions

  • Sun disk MemoryStick pro duo does not fit into the laptop

    My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

    Hello

    Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

    Kind regards.

  • HP laserjet p1102w: wireless printer does not work with the new wireless network

    My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

    Hi Shlomi,
    Thanks a lot for the info. I'll give it a try today...

  • Fingerprint reader does not work after the laptop awakens from his sleep.

    Pavilion DV6-6c15nr

    Windows 7 Home Premium

    Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

    Hello

    Uninstall the software and current driver for the fingerprint reader.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    Download and install the latest version of the software from here.

  • Wireless printer does not work with the laptop running Windows 7

    Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

    The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
    They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

    and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

  • Printer HP Deskjet D1460 does not respond in the laptop but printing show print option

    Mr President, 2 years ago, my hp deskjet d1460 works well in Asus X54c. After 2 years when I placed the new cartridge 21-22 don't is not printing. But the printer shows printing. In short, through control of the laptop I couldn't make answer to this printer.

    PL. suggest

    Mr President, it is later can print, but before my file selected print the print file name, directory, and so wasted 1 extra page excess in every print of my impression of selected file.  As suggested by the intermediary online is now is solved by deselecting "dicucument properties." in the option file. Thank you very much

  • My laptop does not connect to the Internet wireless or Ethernet.

    Hi my laptop does not connect to Internet via Wi - Fi or Ethernet connection. He previously connected the two. The model is a portable HDX-18 1201 and runs the Windows Vista 64-bit operating system. I have had the laptop for a while now and this is the first time that this has happened. I tried to locate the network drivers but can't find them on the Device Manager. To my knowledge, I have not changed anything on the computer that may have caused this. If someone could help it would be greatly appreciated. Thanks Richard

    Hi Richard,

    Search for the latest drivers for your model laptop from the HP site and then try if operate you, install it, for the wireless and Ethernet cards

    just download the drivers from the HP website through another computer, copy it to MemoryStick and install the drivers on your laptop and see if it detects it fine, and then it should work Fine.

    Kind regards

    Amjad

  • Windows 7 does not load on the laptop. Satellite L series

    Not sure what happened all of a sudden with my laptop, but it does not load windows. This is the error msg I get:

    Intel UNDI, PXE - 2.0 (build 083)
    Copyright (C) 1997-2000 Intel Corporation

    For Atheros PCIE Ethernet Controller v2.0.0.9 (15/12/09)

    Check the connection of the cable!
    PXE - M0F; Exit Intel PXE ROM.
    No boot device - insert boot disk and press any key

    I tried using the recovery disk for the repair of the system and using the sfc/SCANNOW utility, but both just run it for hours (12) and not going anywhere.

    I tried reinstalling the RAM and nothing.

    Help, please!

    Liz

    Post edited by: lizandcourtney

    1. enter in BIOS
    2. restore default values
    3. exit & save changes

    Youre system should boot in AHCI now again. If you get the same message:

    1. enter in BIOS
    2. go in advanced
    3 set mode Compatible HARD drive / IDE
    4. exit & save changes

    To enter the BIOS F2 press until you initialize (directly after pressing the power key press F2 continiously).

  • HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

    Hello

    Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

    Key points

    * Battery charge does that when the lid is closed (sleep mode). **

    * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

    * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

    * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

    I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

    Thank you

    Maggie

    Hi there @mdeely,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

    Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
    How can I find my model number or product number?

    When I enter the product number, I'll get the documents to your computer.

  • Inspiron 530 Win XP Home does not start with the TrendNet wireless card

    I just received 5/1 a refurbished Inspiron 530 530 Mini-Tower desktop: Intel Core 2 Quad processor Q6600 (8 MB L2 cache, 2.4 GHz, 1066FSB) Genuine Windows XP Home Edition. The PC didn't have any LAN card and I intend to use a working adapter TrendNet (COMPUSA) 54 Mbps Wireless G PCI I used very well with my old 4300 Dim run also Win XP Home. However, after that I booted up the new PC with the first series, I stopped him. I then opened and installed the card wireless in one of the 2 empty PCI slots. When I turned on the PC, surprise! The PC wouldn't start - it kept beeping with the glowing orange of front power button and turn off every two seconds, I then read the Inspiron 530 manual means that the motherboard has detected an error. Hello. I checked.

    I searched other posts in this forum and I've seen a few references to the boot configuration verification. However, installation of starting my PC doesn't have an option related to the wireless adapter.

    Someone help me please fix this error. I intend to reconnect the card on my old PC wireless again and start just to prove that the card is always good. I only removed a card video of him and the rest of the asis. (I've not carpet in my house is that reduces my chances to have fried the card when you remove or install.) I also touch the chassis of the PC before doing anything.)


  • The volume control does not work in the laptop ASUS A56C by keypad

    I upgraded from Windows 8 for Windows 7 and now my F10, F11 & F12 function keys do not work. How to make a comeback?

    Russnip

    Updated win 8 for win 7?

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • printer not comminicating with the laptop wireless

    just bought epson xp402 printer .works on usb, connects to the wifi .but wiil not print. all I get when asked to print is a window showing empty ink levels and a notice indicating that not ready. It seems that they do not communicate. aid, laymans terms please...

    Hi William,.

    This problem can occur if the network discovery is not enabled, incompatible drivers, incorrect settings of the printer, lack of updates, or due to a problem with the printer.

    Method 1:
    First, let's run this fixit who will help resolve the problem.

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Method 2:
    If the problem persists, I suggest you make sure that network discovery is turned on.

    Check out the link:
    Enable or disable network discovery
    http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

    Method 3:
    I suggest you try the procedure described in the article and see if it helps.

    Wireless network card: how to change the settings of the printer network (Infrastructure mode)
    http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=372853&data=0ccCGROWIYMPYEG96Fc6zsl5DanPn7NLjkTApGU002FKSawU003D#toc2

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Camcorder does not record on the laptop on a CD.

    Helllllp.

    My Sony camcorder (2 years) willl not save any imageas on my laptop (2 years Toshiba old.)

    I read book 3 more times and reed all the "HELP: sections on the program."

    Any suggestions?

    CAT

    Helllllp.

    My Sony camcorder (2 years) willl not save any imageas on my laptop (2 years Toshiba old.)

    I read book 3 more times and reed all the "HELP: sections on the program."

    Any suggestions?

    CAT

    ===========================================
    Windows 7 was designed to import video from MiniDV
    Tapes... THROUGH THE... IEEE 1394 FireWire (Sony i.LINK) connection

    Seems like your Sony should benefit...

    The following items may be worth a visit:

    How to import videos in Windows Live Movie Maker
    http://www.Dummies.com/how-to/content/how-to-import-videos-into-Windows-Live-Movie-Maker.Navid-323836.html

    How to import pictures and videos from cameras and other devices
    http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-import-photos-videos-camera-FAQ

  • Logitech bluetooth boombox speakers does not connect to the laptop. Troubleshooting gives no driver

    Cannot find a driver for logitech bluetooth boombox speakers

    Hello

    Unfortunately, the device is not compatible with Windows 7. Then I suggest you to contact Logitech support.

    Logitech Forums: http://forums.Logitech.com/

    For your reference: http://www.Logitech.com/en-us/1201/8481

    Hope this information is useful.

  • InBuild microphone does not work in the laptop

    right click on its icon on the taskbar and then choose the recording devices, in this dialog box, I can able to saw off the detection of sounds, but microphone is not google work calling, recorder of sounds,.,.
    Also the default configuration in this window option is disabled
    I see the message "the device is working properly" in the window of the audio driver.
    I have no headset with microphone.

    RajGanesh salvation,

    This problem can occur because the settings of the card its misconfigured.

    I would be grateful if you could answer the following questions:

    1. What is the brand and model of your computer?

    2. did you of recent changes made to your computer?

    Please see the methods suggested by that Rajesh Govind dated March 19, 2013 from the link below.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/my-headset-microphone-not-working-in-Windows-8/f4f1ad12-E7EA-4FFB-ac88-df5eed3298e6

    Hope that the information provided is useful. If the problem persists, answer here and we will be happy to help you.

Maybe you are looking for

  • uninstall the application Marketplace of Firefox on android

    I tried the Wikipedia app market on my 4.2.2 N4 android running. Cool app, but now I want to uninstall it. I can't figure out how. I have long pressed the app on my home screen icon and staged to 'eliminate', but just who took the icon to the home sc

  • Hotfix?

    Today, I saw that an updated driver was transferred a month but the title of the patch... could someone explain what it is for?

  • Cannot start the DSC Shared Memory

    I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get th

  • Epson stylus photo R300 printer

    my epson printer seems to work fine during the normal use of the computer programs (ie the word) but does not work when you print from the internet. It begins to go through the motions by displaying the ink level box and the printer marks some sounds

  • Error 1075 no firewall, no system info

    I have recently updated from Windows ME to Windows XP Pro.  I have no firewall, can not access system information.  Under Services, could not start the Security Center, same system with error 1075 Notification indicating that the dependency service d