printer does not print to put in queue

Similar Questions

• Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing happened until now

  Password on notes does not work! Put juice in day to ios9.3 and password to notes, but nothing happened. Notes always open as before. I tried to add new notes too. But nothing has happened so far.

  Same question, the lock in action field icon is absent.

• Firefox does not start after putting in

  Troubleshooting of the measures taken:
  I uninstalled and reinstalled the program.
  I spend just clicked and ran as administrator.

  I get no error message. Just... nothing happens.

  Possibly associated, I tried to run the update of Adobe Flash and it does not either. Everything else seems to work fine on my system, including IE, however.

  Last updated:
  After Flash Player install, I decided to try to uninstall/reinstall with Firefox again and I uninstalled AVG 2012. And now, as if by magic, it works.
  2015 AVG found nothing in his comprehensive analysis of the system.
  I don't know what has changed. My best guess is that there is something in 2012 AVG blocking FF v. 36.
  Wish I could provide more insight.
  Thank you all for all your advice!

• Exchange of TMS 3.0.1 & TMS 13.2 Cisco TMS server does not respond. Put an end.

  Hello

  I recently upgraded to TMS 13.2 and installed Exchange TMS 3.0.1. Installation and Configuration worked well, but no event is synchronized to MSDS. If I look at the log file, I see the following line:

  Cisco TMS Server is not responding. Halting.

  It seems that TMS Exchange is not able to communicate with the TMS. Setup worked well, and the TMS user is Super Administrator, so I don't think it's a problem of permission.

  I have attached the journal exchange of tms with level Debug of the game.

  Any ideas?

  Hey

  Using HTTPS or HTTP to communicate with the SMT server through the TMSXE service?

  Also, I would look in the Windows event logs to see if there's something interesting here. Especially check the application + TMSXE the event logs. I Don t want to join here (it's for the TAC) but if you see something that could be linked to the issue, please let us know.

  Otherwise, I recommend you get help from TAC on this since it is more appropriate for a deeper repair.

  / Magnus

• Problem with "Photoshop site button".  It does not import or 'putting' my PSD file.

  So I have a PSD file of triple layer a custom facebook icon I'm trying 'place' in Muse.  (PSD file includes transparent background, layer 1 and layer image 2).  When I go on the 'Photoshop Place' button and select my PSD file containing this and click on 'ok', the option dialog box however appear without my images or files.  I'm doing something wrong?

  Hi SDM,.

  Are you this option after selecting the .psd file?

  

  Kind regards

  Nitin Kapila.

• Photosmart premium all-in-one: printer does not print.

  I printed a photo of the night before and the next day it wouldn't print.  I put in a new black cartridge HP first, and when it does not work I put in a new photo cartridge.  All my cartridges show as complete on the computer report but the report to the printer does not show anything in the settings of the picture. I downloaded a driver updated, still no luck.  Very frustrating!  What can I do?

  Help please...

  Yay Jabzi!  I am so excited!  It actually worked!  I am 72 and a little hesitant to pull things out of machines so am very happy and grateful for your help.  Thank you!!!

  Marg

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• The menu list of lateral nevigation does not (+) I put the Parent for some items list entry! Why?

  Dear all,

  The menu list of lateral nevigation does not extend I put the Parent list entry for some elements. (sublist extention does not) why? (APEX 4.2.4...)

  any iadea?

  cordially siya

  Siya,

  you choose wrong

  Model list-> vertical list with subtext and icons

  which consist of list with additional information about the entry in the list

  not a child of list (sublist)

  in order to choose another list as "Hierarchical expanding" model that adapts very well to your needs

  or

  See more blog which refer, what you want to achieve

  Creating a navigation menu of the accordion as jQuery | APEXPLAINED

• Siri does not or dictation

  Siri since iOS 9 update does not

  Restrictions put in place in settings/general/Restrictions? If so, disable them.

  Have you ever tried to force restart the phone after the update into the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data, but it can cure some problems after installing new software or applications.

  If this does not work, the initial Setup would be the next step:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• ENVY Touchsmart 15J000: does not start

  My Hp Envy 15 D0D78AV aka the j000

  It has a processor AMD 5750 M and the thing dual graphics.

  Flashing caps lock once every 15 s or indicates that the CPU is not responding.

  I removed the radiator and fan to clean and it starts not since. I bought a new CPU for it and its still does not (yes I put the new Paste on it).

  There was a piece of tape metally who went from the fan on the heatsink that I have more I don't think anything of it. is this some sort of ground causing it to think its overheating?

  I have the power to all the usbs fan works and the HARD drive makes noises so I don't think that the mobo is burned.

  Bassically the screen not turning on it is the fan turns on full speed as usuall and then down and quiet for about 10 seconds or so then gets up to operating speed. and then it just sits there doing nothing just the caps lock blink once every 15 years or more. I don't know what else to do and I can't afford a new laptop and I need for College security literally missed a month ago.

  Help, please!

  Blink codes may look like a bad treatment, but almost invariably, it's really the motherboard. Here you have posted here before that you bought a new processor. Now you have 2 good I'm afraid. And you have this tape to the heat sink. He directs the air on the grid of the fan and without it the laptop will not cool right. But that is irrelevant at the moment until we can get it to the POST.

• BlackBerry® Smartphones email does not work

  my personal e-mail does not work, I put accounts in place on my phone, but when the messages are sent to my personal email, they don't get out phone.

  How can we solve this problem

  Please mark the thread solved.

• Case of pocket torch blackBerry Smartphones does not work for Bold 9780

  Nice day

  I bought a BlackBerry Torch 9800 (ACC32838301) Pocket case, TELUS, but it useless for my flashlight. I want my wife to use this case for his Bold 9780 but the magnet does not work by putting the camera in mode 'sleep'. Why is this? The case is a little big, but still fits well on the Bold 9780. Is the magnet misaligned a very little bit for the "BOLD"?

  I use an old case of leather case that has worked for my old Curve 8330, Bold 9780 and Torch 9800. So why not this new business. Y at - it something wrong with my case specifically, or if it is not designed to work for the "BOLD"?

  http://www.BestBuy.ca/en-CA/product/BlackBerry-BlackBerry-Pocket-case-for-9800-torch-acc32838301-bla...

  Thank you.

  M.

  Hello

  The placement of the magnet is different for different models of BBs. Some are interchangeable, the more I think are not. Therefore, it is always best to use a case that is made for the specific model of BB.

  Good luck!

• Error Code 39 - CD/DVD does not work

  A month ago I installed a new graphics (NVIDIA GeFORCE 6200 OC) card in my Dell Dimension 2350.  I discovered that the 250W power was not enough power to run the new graphics card, so I ordered a new power supply 480W.  After you install the new power supply, or my CD or my DVD players don't work.  They have a yellow! mark in Device Manager.  In the State of the device, he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "I tried to remove the Upperfilter and the UpperFilter registry entries.  It still does not.  I put the old power supply in.  It still does not.

  Help!

  
  

• Completed tasks remain in the queue, subsequent job does not print.

  Queue says 100%, but it never goes away.  If I put the computer to sleep, it prints a second copy of the work "completed" (even if only one has been specified.  If I have a second job in the queue, it does not print until I have manually delete one (a troublesome task with several jobs to print).

  I tried a few suggestions that I found these boards of Directors, including the removal and re-adding the printer, printing (Option-click) system reset, unplug the power cord and plug and unplug the USB cable and reconnect.  None of these things has eliminated the problem.

  I can impose by the experts here to suggest something that I might have missed?

  Photosmart Premium C310

  Driver version 4.1.2

  Mac OS 10.9.4

  I recommend you only uninstall the HP software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart C6300 does not print on my Mac since I put in a new ink cartridge.

  My photo ink cartridge was low, so I put in a new HP photo cartridge.  Now my printer does not print on my Mac.  Just paper goes through and come out blank.  I turned it still works, but not printing.  I got taken out and back again without success.  Also, I restarted my computer without no printing.  I tried a test message, but still no printing.  I don't know what to do about it.

  Hey @bluebirder,

  Welcome to the HP forums!

  I see that you have a cartridge that is not printed in your Photosmart c6300. I can help you with that.

  This document describes How to solve print quality problems with your printer. If after completing this document you still see blank pages then the cartridge should be replaced. You can contact HP support by clicking here and filling out the form below.

  I hope this helps you feel and I hope you have a nice day!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.