printer does not turn on

Similar Questions

• HP photosmart 7520: 7520 printer does not turn on

  had a paper jam, had to move far right cartridges.  easy to remove some risk of stuck leaves none behind the printer.  No tears in paper, printer turned off itself and I can't turn it back on.  Thanks a lot for possible solutions.

  Hello @sara3!

  Thanks for posting on the HP Forums!

  I would be more then happy to lend a hand.  Looks like you did a lot of troubleshooting for a paper jam already.  The first thing I always suggest is to plug the printer into the wall directly if there is currently a power surge protector or extension cord. This may sound silly, but this will ensure the printer gets full power and can eliminate any unnecessary troubleshooting. If the printer is no longer becomes full power of power against power surges or extension cord, it can give a false errors, have bad connection, paper issues food, quality problems etc.

  I'm not sure if you have gone through this paper paper jam still but I recommend you to take a glance to ensure the troubleshooting of all has been done.

  If you still have the problem then your printer may require an update of the firmware.  An update updates the operating system in the printer.  If the printer needs this update you can get random questions.  It is recommended to connect the printer to the computer with a USB cable when you perform an update of the Firmware.

  Download and run the Firmware update here: update of Firmware for Photosmart 7520 located under Firmware (1)

  If you please, after back and let me know if this solves the problem.

• HP Photosmart 7450 printer does not turn on

  I have a HP Photosmart 7450 and a new toshiba laptop. I can't get the printer to work or even turn on when I push the button. I've never had problems with it when I got my Dell. I went to the HP site and it says that the drivers are already installed on windows 7 for my printer. My computer stopped working USB. How to operate?

  If the printer doesn't appear when you manipulate the pwr btn, then this printer has a problem and can't do anything Windows.

  Check your connections for pwr printer

• Printer does not print not complete pages.

  When I give print command, the printer (I use MS Works), the printer starts to print a page and then, after a few lines, will be offline prematurely. The printer does not turn off. It sounds the signal that the job is done and ejects the sheet of paper. Maybe 5 lines are printed until the printer ends prematurely.

  Hi Davy40,

  I understand that you are having problems with your printer only give you partial pages, but acting like it printed the entire page. I'm sorry to hear what is happening, but I will certainly do my best to help you.

  I just need to ask you some questions to help you better!

  1. what model printer work?

  2. you are working with a Windows or a Mac computer?

  3 do you get errors when trying to print?

  4. how the printer is connected to the computer? USB or wireless?

  Once I have this information, I should be able to help!

• My photosmart A710 series does not turn on.

  any ideas of rml

  Your power cord or printer turns off if the printer does not turn on.  Parts for your printer are not made or sold more, so the only option would be to replace the printer.  I'm sorry.

• My Hp 4500 Wireless printer does not print, or will not be closed

  The connected printer will not be closed, does not, print does not diagnosis or anything like that.  He tried to stop three hours now and nothing has changed.  Power on the computer power off and nothing happens.

  Hello

  1. don't you encounter any error message when you try to print?
  2. have you made changes to the computer recently?
  3. what happens when you run the HP diagnostic utility?

  Method 1.
  Try to run the printer Troubleshooter and check if it finds problems. See the link below for additional information and steps.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2.
  Given that the printer does not turn off I will also suggest you to check with the help of HP on this.
  http://welcome.HP.com/country/us/en/support_task.html

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Color LaserJet Pro 200: Printer does not finish pre-seminar when turned on

  When I turn on the printer, it does not meet the criterion of self-diagnosis. All the icons of perimeter lights up but the screen itself is empty. I have already disconnected the printer with it. I also connected the printer directly to a wall outlet using a different power cord. That is what it is?

  Well, I'll send you a few indications of how to perform a factory reset. You should see a message in your Inbox shortly.

  If the printer will not turn on always having the light of the foregoing, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after doing the reset. If you are able to print or if you arrive to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• printer does not print. Try turning it off. 2 days said "Shutting Down" but does not work.

  Printer is an all-in-one Photosmart C7280

  Windows 7 operating system

  "Shutting Down" message on the screen

  Any changes made to the system before the problem occurred

  Printer does not stop. Manual says not to unpug so that the printer is turned on.

  Where do you go from here?

  The warning against unplugging while the appliance is in use is for "normal".  In this case, you will need to do.

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.

• HP envy 5530: E print app on my phone says this printer does not exist.

  I am trying to add my printer to my application on my phone and I get the error "this printer does not exist or you do not have access to him."

  I went on HP Connect site and it shows that my printer is online and ready to use.  I checked to make sure that everything has been updated. I'm not sure what I'm doing wrong.

  Here are a few extra in case info

  HP Envy 5530

  Windows 7 64 bit

  Thank you

  Hi @mcmoran2004

  Welcome to the Forums of HP's Support.  I understand that you get an error message when you try to add your printer to your HP ePrint app on your mobile device.

  If you get this error message when you try to add the printer to the application using the ePrint printer e-mail address, then follow the steps below.

  1. Please delete the app on your mobile device.
  2. Please turn off your camera mobile for a total of 30 seconds, and then power back on, please.
  3. Once your mobile device has completed its startup routine please download and install the application again.
  4. Please activate the application using your personal email address.
  5. After the activation of the application please try to add the printer by its address of email ePrint.
  6. If you still get any error message then, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  Please let me know the results.

• Series HP Photosmart C309a: printer does not print!

  All of a sudden, my HP does not email print.  I can get a header to print, but not the body of the email-sometimes-not even the header!  Help!  I use my printer constantly in my business and need to work!

  cleaned the cartridge 3 times and disconnected the will of the printer-it NOT turn on!  I tried for 15 minutes - it just won't restart!

• HP OFFICEJECT 4655: THE PRINTER DOES NOT PRINT

  MY PRINTER DOES NOT PRINT DOCUMENTS FROM MY COMPUTER OR MOBILE DEVICE. I PUT IT UP WIRELESS BUT WHEN I OPEN CONTROL PANEL PRINTING OPTIONS AND DEVICE ON COMPUTER IT SHOWS UP BY DEFAULT AS HAVE A SMALL LOCK ON THE PRINTING SHORTCUTS SYMBOL. HOPE I'M MAKING SENSE. Help, please

  Hey @TEJANA1956,

  Thanks for the information!
  
  • Wireless your Officejet currently solid, flashing, or turn OFF light?

  In the meantime, we will try to run the HP print and the tool of analysis of the doctor. Please click here to download the tool. Once the download is complete, run the print and Scan doctor to 'difficulty Printing.' Should any conflict of connection, software or driver find that printing HP and the doctor analysis tool will attempt to resolve these conflicts. Once the tool is complete test print.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped.

  I would like to know how it goes!

• 7510 Photosmart HP printer does not print

  I have problems with my printer does not print.  I printed a report successfully, but when I go to print from Photoshop, printing that says "print page 1, 0% complete" and nothing never goes out.  I turned off the printer and restarted the computer, and then he turned his back.  I unplugged the power cord to the printer and the wall, has waited more than 15 seconds, plugged everything back in and nothing has changed.  I have requed the print job whenever I did these things to solve problem above, but nothing has changed.

  I used to be able to easily print wireless from my Mac.  Then one day it stopped working.  Then I connected the USB cord to connect it to my Mac, now it does not work.  All boards with one or two printing problems would be greatly appreciated!

  OK, check the router firmware is updated.

  Then download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96959-2&cc=us&dlc=en&lc=en&os=219&product=5070121&sw_lang=

• "I get a message when troubleshooting my message" printer does not "on my screen, it says"contact the network administrator. What does that mean?

  I think that the port of my computer does not accept my printer

  Hello

  (1) what is the brand and the model number of your printer? In addition, how the printer is connected to your computer?

  (2) is on a network or locally connected?

  (3) what operating system is installed on the computer?

  (4) when this printer worked very well for the last time?

  (5) where to get you the message printer does not, it is while printing a document or by pressing any button on the printer?

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.
  Note: The following troubleshooting applies for the Windows 7 operating system.

  Method 1: Run the printer Troubleshooter
  Name, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  On the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. below "Printing on the following ports" section, select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  e. click the general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  I hope this helps.