Printer driver for Epson Stylus Color 660

Similar Questions

• TWAIN driver for epson Stylus 600.

  TWAIN driver for epson Stylus 600. warning can't load, although the scanner works.

  Hello

  Please go to the Microsoft Community Forums.
   
  1 are you getting this error message trying to update the scanner?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Method 2:
  Try to install the drivers in mode to boot from the manufacturer's Web site.
  Reference:
  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=110566&infoType=downloads&platform=OSF_W_7-64
   
  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  I hope this helps.

• Cannot download driver for Epson Stylus models SX218 printer and scanner.

  My computer can't find a driver for my new Epson Stylus printer. I tried troubleshooting, but it did not work. Can anyone help? Thank you

  Any drivers/software would be obtained from Epson, specific site you your model and then they must be installed * before * you connect to the printer

  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX218/drivers-support?supportLandingPage=true# make sure that you select the correct version of victory

• printer driver for Epson Workforce 520 compatible with 64-bit Windows 8

  I just bought a Dell all in one 23 computer Windows 8 and I'm having difficulty of printing to my Epson Workforce 520 printer scanner wireless.  I need a compatible with Windows 8 64 bit print driver.

  See the Epson support site for the drivers and software for your printer. There are win 8 pilots it: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=152503&infoType=Downloads&platform=OSF_W_8-64

• Computer can't find a driver for Epson Stylus BX305f?

  Computer can not find the package to control the printer Epson BX305F

  Have you checked to see if you have installed the latest drivers and software: http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/3840

  Also, download and view the user guide.

  J W Stuart: http://www.pagestart.com

• Driver of Epson stylus photo PX710W

  I can't find the printer driver for Epson stylus PX710W for my new photo notebook Windows computer 7

  Hi Gillian,

  Welcome to Microsoft communities.

  I understand that you are not able to find the printer driver for Epson photo stylus PX710W.

  Follow the steps described in the articles below:

  Update a hardware driver that is not working properl

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  See the link below:

  Drivers & support: Epson Stylus Photo PX810FW
  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/3590

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• How can I load it drivers for epson stylus tx117 pls help

  where can I to load a driver for epson stylus tx117 pls help me tnks

  where can I to load a driver for epson stylus tx117 pls help me tnks

  Go to the Epson website and check there to see if a driver Windows 7 for there. If so, it download and install it.

• with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

  with win 64 pro 8 comment get a driver for the epson stylus color 500 rx scan

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  
  http://support.Microsoft.com/common/international.aspx

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• Please give the link to download the HP UPD PS driver for my new color CP152n laser printer, I am Anand

  Please give the link to download the HP UPD PS driver for my new color CP152n laser printer, I am Anand.

  I use professional windiw 64 bit os

  Thank you

  Pilot the site of the UPD is here: http://www.hp.com/go/up

  You can download the driver of the UPD PS here: HP Universal Print Driver Postscript

  I could only locate the LaserJet CP1525 and in the list of products taken in charge, the CP1525 is supported by the UPD.

• installation disc for epson stylus sx515w, lost received an engineer reset disc are the same?

  Help, please

  I lost my installer for epson stylus sx515w drive, I have sent for a new disk but received an engineer reset disk, are they the same thing? and if so, how to install my printer?

  Go here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Overview&oid=128289

  and you can download the drivers and the manual and others.  You don't need to order a CD.

  You can watch the CD you need to see if the drivers are on it.

  Steve

• Epson Stylus Color 400 is unresponsive to commands from the computer

  Although it worked fine for the past three years, my Epson Stylus Color 400 suddenly stopped to respond to commands from the computer.   I have checked all connections and assured cartridges are full and OK.   After turning off the power and unplug the printer from the computer, then press the power button and the power button together and then release the two buttons (all according to the Epson manual) prints a number and alignment to check properly.   What did I miss?

  Hi Brian,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that this printer is not responding.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Do you get any error messages?

  This problem can occur if the cables are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates, and problems related to the printer.

  Method 1:
  First, let's run this fixit who will help resolve the problem.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 2:
  If the first method does not resolve the problem, you can try the procedure described in the article and check if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Check out the link for more information.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with printing, I'll be happy to help you. We, at tender Microsoft to excellence.

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.