Printer Envy 5530

Similar Questions

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• How to choose the dpi specific when you scan pictures on printer Envy 5530/5535

  Printer using HP Envy 5530/35 on Mac, using HP Scan software app. When you scan pictures I want as much detail as possible. The only option I have to increase the resolution is to use the 'best '. That scans only at about 200 dpi I think. How can I scan at 300 or 600 dpi?

  Mac, Mavericks, entirely software update HP. Purchase printer less than 3 months ago.

  try to go to Preferences system then printers and scanners.

  on the scan tab, click Open scanner

  with this scanning application, you can select the DPI

  If its does not try to click Preview or view details

• Configuration printer ENVY 5530

  Replacement of broken printer HP 6510 with ENVY 5530. Followed the instructions on the printer and recognized as a separate connection on the list of connections. Then tried to load the program from the disk to connect to the wireless computer (later tried USB but also omitted) display indicates failure in the middle of the phase of final connection. Problems search seems to indicate that the base drivers are not present even if they are probably responsible for disk and busiest when prompted on the internet. Doctor HP printer is not move me. While the fire of such options that registry cleaners and disableing tring walls I got an error 0x000003eb come. Also I tried removing and reloading program a couple of times. Any suggestions?

  Thanks for your help. Actually David and Grace has solved the problem yesterday through technical assistance online after a few hours of tweaking and take control of the computer. Finally solved I think that changing the wireless address codes. Thank you when even (it seemed a fairly complicated process that had baffled for a while)

• HP ENVY 5530: My HP PRINTER ENVY 5530 ACCOUNT

  Long boring story, but in a few words...

  1.21 / 09/15 - printer had the paper jam false reviews on screen (there is no paper inside), HP tried to fix (via Chat for 2 hours), but couldn't trouble & said they would send a replacement printer.  CANNOT GET MY PRINTER TO DO ANYTHING AT THIS TIME HERE.

  2.22 / 09/15 - printer working again. Am went on the cat to try to stop the delivery of replacement - they said to refuse just when he arrived via FedEx.

  3.23 / 09/14 - FedEx sent. I explained why I refuse shipping. FedEx man hit something in the scanner at hand and put replacement FOR PRINTER BACK ON TRUCK.  I asked if he could give me something that says I have refused delivery, but he says, that it has been supported... so I don't have any physical evidence.

  4.30 / 09/15 - HP e-mail "Getting Started...". Tips for using your new printer. (????) That's when I started to panic. Obviously, HP thought I had the replacement printer and was waiting for me to send my original back for them.  9/23-9/30 is a whole week.

  I don't know how to solve this problem.  DON'T WANT TO BE CHARGED FOR A PRINTER I DON'T HAVE.  Tried for 3 days to join HP Support - sent 3 emails (no response), can't seem to get on Chat again.  Very hard of hearing, so call would not help.

  A PERSON ON THE FORUMS OF HP CAN HELP ME SOLVE THIS PROBLEM? How can I fix my account to remove the replacement printer? Day course to do your research before they charge me. Thank you.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• printer Envy 5530: Instant ink page

  I got when I went to my Flash page of ink that he was telling me how many pages I print to this day and still, he says nothing, is there somewhere on the printer I get this info? Its been a few weeks, I have to wait longer? its not up to date?

  Hello @sassejan ,

  Welcome to the forums of HP.

  I understand that you fear that your instant ink account does not display the used pages.

  I would like to help.

  If you have not installed one of the welcome package ink cartridges, then the pages are not been saved.

  I mean, it's, you subscribed to instant ink but the program is not active.

  Ink does not get monitored and pages have not counted until the program is activated.

  If you have installed instant ink cartridges, you may have a communication problem.

  Simple network troubleshooting usually gets this problem.

  I can help you with this, but depending on how long the connection problem that has passed, this could lead to surpluses on the number of pages.

  So lets take a moment to see what you need to do.

  1 do you have instant cartridges installed in the printer?

  not - so don't worry about the number of pages until you do.

  Yes - tap web services (2) icon to see if there is a server connection error.

  

  Please contact our Cloud Services at 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Opening hours:

  Monday-Friday 08:00 - 23:00, sat 09:00 - 20:00 -
  Monday-Friday 07:00 - 22:00, Saturday 08:00-19:00 - CST
  Monday-Friday 06:00 - 21:00, Saturday 07:00-18:00 - MST
  Mon - Fri, 05:00-20:00, Saturday 06:00-17:00 - PST.

• Want 5530: having to save emails before printing, envy, 5530

  I just installed this new printer as a replacement for a Photosmart previous wireless.   For the first time, I am invited to save an email or an email attachment before being able to print and cannot simply click on print as in the past.  How can I avoid this please?

  Hello
  You can access your mail from Google Chrome?

  If so, Google chrome, open the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Otherwoise please specify what software you print from.

  Shlomi

• Re: Fast draft between Chromebook HP and HP Envy 5530 printer

  Hello

  I was delighted when I bought my new HP envy 5530. Prints well and I like the feature where I can emial directly on the printer.

  The big disappointment is the following... I have an Acer Chromebook. Use Chrome Web Store rather than the game store, so I can't download HP eprint. I can't install the software b/c I don't have a cd player.

  Is it possible to print on my new HP envy 5530 to and Acer Chromebook?

  Hello chromebookuser,

  Welcome to the HP Support forums.   I understand that you have a Chromebook and your printer Envy 5530 and want to get the program installation and operation.

  The first step is to connect the printer to your wireless network.  This can be easily completed from the front panel of the printer.  If you do not know how do steps are in your User Guide page 55 in the section titled "to connect the product with the wireless configuration wizard.

  Now that the printer is connected to your wireless network, we need to enable the web printer services.  This too can be completed the façade.  Please refer to the code of request for printer if you need assistance. Please set up your account connected HP or HP ePrintCenter.  Using the printer application code, you can now Set Up a Custom E-mail address for ePrint.

  Now that we have customized the ePrint printer e-mail address we can implement Google Cloud Print.  I have included the Google Cloud Print help with your HP printer to guide you through the process.  You should now print with Google Cloud Print.  For any additional consultation, I have included print a Page from Google of document.

• 5530 multifunction printe envy: want to set up the remote printer 5530

  Hello

  I have a printer Envy 5530 (new, never used or put in place) and I would like to use it to print remotely from my tablet. My tablet is running Android 4.2.2.

  I DO NOT have a computer and would like to know if there is a way to set up this printer to print remotely from my Tablet without needing to use a computer in the configuration.

  My tablet is currently connected wireless to my router which is not vacant ports Ethernet open if they needed to be able to print (although do if completely wireless would be preferred.)

  Thanks for any help anyone can give me.

  Hello

  You can attach your printer HP Envy 5530 to your existing wireless network, and then

  (a) use Google Play/store to install HP ePrint app on your Android device to print when the TWO are on the same network.

  (b) that your printer is also an ePrint printer. You can send an email to the email address that you want to print (supported file formats) when you are away from home

  Copy the following information to connect to your wireless network

  www.YouTube.com/watch?v=kOUA2t7lJlk

  Kind regards.

• All-in-one HP Envy 5530: printing on all-in-one HP Envy 5530 error

  I got this special printer for less than a year and this is the first problem I've had with her.

  Recently, whenever I try to print something, I click Open Active printers and after a while the work in the print queue displays "Error-printing" and will not start the print job.

  He also said that it is properly connected to my network so I reinstalled the software and drivers and restarted my system trying to solve the problem but there was no change.

  Hello @BryanMiller, hope you are well!

  Thanks to their participation in Forums of HP! I see by your post that you are having problems printing using printer Envy 5530. I will definitely do my best to help you.

  First of all, we will try to solve this problem using print HP and Scan Doctor (PSDR). PSDR is an automated tool that allows you to diagnose and resolve problems printing and scanning. Visit http://hp.care/2bZ9w2q to download and run the HP PSDR. Once you open the program, click on "Printing problems" to diagnose and fix the problem automatically.

  Please let me know if it works for you.

  Good luck!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy 5530: Printing stops halfway through on the impressions of page multiple.

  We have two machines Windows 8.1 print wirelessly to a printer Envy 5530 and if we try to print a document of several pages, many applications, the printer stops printing half way a page, not the first, eject this page and does no more than the print job print, but will continue the work next in the queue. I made sure we use the latest version of the HP software and Windows is up to the updates.

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• ENVY 5530: 5530 WANT wireless printer stop halfway through the page. Memory problem?

  Good afternoon:

  I m encouraged to print from an HP laptop pavilion15-N228SS wireless (WIFI) connection. Printer ENVY 5530 beggins to print but stop abruptly in the middle of the page, or just the printing of the page if there is an image.

  I think I have to give some more memory to the printer but if I Don t know how to do.

  Thank you very much.

  Take a look at this HP doc .

  You should also consider upgrading to 8.1

• HP Envy 5530 question about Online versus WiFi and access by HP for ink monitoring program

  Hello

  I am new here and also back to the program monthly fresh HPs for the programme of replacement of ink as well, I tried to find the answer to my question but could not.  Then...

  My question is, as I don't have a WiFi router (used for tv, netflix etc. at all hours of the day) to use my new HP printer Envy 5530, and given that I am enrolled in the program of ink, this means that my computer itself must stay online 24/7? Or just have my WiFi on 24/7 gives the printer access, it must be monitored by HP for its ink for the monthly subscription levels to be enrolled in the program of HP ink?

  Thank you

  PhyAnnie

  Hello

  No need to be on 24/7. Whenever you turn on the printer, it will connect to HP Server you set up normally (you can print, scan, and send it to print).

  Kind regards.

• HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

  I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

  Let us know.

• I have HP Envy 5530, how to print images on T-shirts?

  I have a HP Envy 5530 and have no word, does.  How to reverse the image for printing on t-shirts?

  Anyone able to help.  I need help by Tuesday, May 13, if possible.

  Thank you

  phylboyse

  Hello

  You must return first using step #1 on the following article:

  http://support.HP.com/us-en/document/bpa00482

  Kind regards.