Printer Epson NX 415, get a message saying something on the refill cartridges, but even when I tried to solve the problem, I was unsuccessful.

I have an Epson NX415 printer, the problem I have is my arer of ink cartridges not recognized or fake messages saying that I need to replace a particular cartridge is correct. I tried the Epson OEM cartridges as generic in all combinations without success. Sometimes, I get a message saying something on the refill cartridges but even when I tried to solve the problem I was unsuccessful. I have tried all troubleshooting solutions on Epson web site without success.  Help!

I hate to say it, but if you can't get help from Epson, it's probably time to buy a new printer.  It's a printer hardware problem or a problem of printer driver, and the two of them come from Epson, not Ms.

Good luck.

Tags: Windows

Similar Questions

  • Screensaver freezes. I have to type ctrl-alt-delete. Also, I get a message saying that explorer.exe is running, but no programs are running.

    Original title: help! MOM's computer

    is running "Vista Home Premium-service Pack2. Intel Pentium 4 CPU 3.20 GHz 2 GHz ram - 64-bit operating system. For some reason, not all the time, its 'images' Screensaver freezes and I have to hit ctrl-alt-del to reactivate the use of the computer. I noticed that when I make a new start, I get a message saying explorer.exe is running, but no programs are running. When I chose to turn it back on, restarting solves the problem... temporarily? until that (I don't know when) this 'explorer.exe' Decides to run again in the background? Advice?

    Hello

    Did you change your computer?

    Method 1:

    I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • I have a Dell Windows 7 after downloading updates crucial sercurity, I get a message saying "Connection to the internet." The display then returns to the logo screen. What can I do?

    I have a Dell Windows 7 after downloading the critical updates, I get a message saying "Unable to connect to the internet."  What should I do?

    Hello

    1. Once you get this error message?
    2. are you able to browse the internet using your internet browser?

    Step A.
    Please check if you are facing the same question when working in mode safe mode with networking.
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
    e. when Windows starts, use check and Internet explore if the problem persists.
    For more information, refer to the article below.
    Troubleshooting in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

    Step B.
    If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    I hope this helps.
  • I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

    Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

    original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
    Hello

    Use the startup clean and other methods to try to determine the cause of and eliminate
    the questions.

    ---------------------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I get a message saying that Firefox must be updated, but when I click on the update box, nothing happens... Why?

    Every time I open Firefox, I get a message that an update is available, but when I click on update, nothing happens.

    I have a Mini Mac OS X, version 10.6.8

    I have a 1.83 GHz Intel Core 2 Duo

    It is 2.5 GB 667 MHz DDR2 SDRAM memory.

    I don't know what all this means, but I thought you should know that. Thank you.

    If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

    Download a new copy of the Firefox application and save the file on the desktop disk image (dmg)

    Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.

  • I get a message saying I am running Windows XP, but I have Vista.

    I tried to switch to IE8. I get a message to check the site for Windows XP. I'm running a lap top that has Vista Edition Home Premium. I bought it new, and he never had XP on it! IE 8 is incompatible. I tried the version for Vista & XP, nor work properly. What should I do to get IE working correctly? I have a Dell with IE6 pc on it.

    You can't have IE6 with Vista.

    Vista comes with IE7.

    It is part of the Vista operating system.

    I think you had better check with Dell as to what operating system you have.

    Or click Start > right click on computer > click Properties > he'll tell it what operating system you have.

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

    And the above link is the Forum of Internet Explorer for your IE issues.

    See you soon. Mick Murphy - Microsoft partner

  • When I try to print puzzle apps I get a message saying not available try later on my hp 6510

    My crossword U said that is not available HELP! I tried to print other puzzles, but they say all not available.  The last time I could print app was on February 15, 2013

    If the Puzzle app is the only app that does not work; We can eliminate web services, but there are now that this step will cause one to lose their personalized e-mail address that they created for the printer and could not choose this address again for 6 months. For more information on how to manage printing applications, we can watch this link here.

  • When reading Slotomania, I get a message saying something about an update of the system.

    a box of canned food that appears and when im playing slotomania if I click on the Red croaa the top it then gives me a white screen

    original title: System update microsoft windows updates / a box of canned food that appear and whenever I have click No or output it gives me a blank screen especially when I play slotomania

    Hello yves2355,

    What is the exact error message that you receive?
    Have you scanned your computer from viruses and spyware? It might be a malware program that is popping up messages. I would advise not to trust what he says.
  • I want to know why when I go to help update v 12.0 every time, I get a message says that my version is up to date, when I know that a new version (16.0.2) came out?

    This happens everytime I go to the update function (tools/help/to what Firefox/check updates). Given that the version I use (12.0) is sometimes gel and refusing to load pages effectively (requires a Firefox stop and restart), and I know that starting with version 15.0, this issue has been resolved to a large extent, I understand not why the update function refuses to see the new version and update that this program has ALWAYS been in the past. Something is wrong and I need to know why this happens.

    It could be that the internal update has been corrupted. Try just go to www.getfirefox.com and download Firefox 16.0.2

  • I get a message saying could access the location %APPDATA%\ network when I try to uninstall itunes

    I tried to restart my computer to see if it would reset and I also did a system restore... nothing works

    Hi amyanderson,

    Method 1

    I suggest that you try to uninstall QuickTime first and then try to uninstall iTunes, check that it works.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 2

    If the previous step fails, then see the items below and try the steps to uninstall iTunes from the computer and check if it helps.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

    http://support.Apple.com/kb/HT1925

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

    http://support.Apple.com/kb/HT1923

     

    Method 3

    If the previous step fails then reinstall iTunes on the computer and try to uninstall it.

    http://www.Apple.com/iTunes/download/

  • I get this message on my home screen common Manager error event. How can I solve this problem?

    the common error event you want to send the report to microsoft

    Hi tenaj7,

    ·         Exactly when you receive this error?

    ·         It's when you access Internet Explorer or when the computer starts?

    ·         You have a toolbar installed?

    If the problem occurs then on Internet Explorer, try the following.

    Method 1: Uninstall all toolbar installed and check if the problem persists.

    Method 2: Try optimize Internet Explorer and see if the problem persists. Follow steps 2, 3 and 4 at the following link.

    Internet Explorer is slow? 5 things to try

    Method 3: If is not on Internet Explorer, then you can try to start the computer in safe mode and check for the issue.

    Just reply with the results.

  • All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?               NG who

    All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?

    It is almost impossible to help until that give you more details.

    • What application or website are you trying to order prints of?
    • Which iMac do you have?
    • What version of Mac OS X are you using? Is it really 10.6.8?
  • Want 4500: I get a message saying that the "the printer is not connected.

    I just bought a HP Envy 4500 all in one printer.

    I can't print to it without having to restart it every time.

    I get a message saying that the "the printer is not connected.

    I can access the built-in web server, so I am sure that it is connected.

    It seems that he is going to sleep but cannot be awoken by activity.

    I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

    The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

    I uninstalled and reinstalled the printer.

    The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

    If I try to scan I get an error-9923

    Hi @jpkeates,

    Welcome to the HP Forums!

    I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

    Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

    Make sure that the multicast is supported

    If you use a wireless network, make sure that muticasting is supported and enabled on your router.

    If the new connection is working, you know that the printing problem is tied to the computer.

    If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

    Disable IPv6 (network connection)

    Disable IPv6 on the printer to make sure IPv4 is used on your network.

    If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

    If your printer does not display, use the built-in web server (EWS) to disable IPv6.

    From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

    NOTE:

    If the Web page appears empty, try another Internet browser.

    Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

    Select enable IPv4 only (or similar).

    Figure: Configuration example IPv4 using an integrated Web server

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this guide and help the steps!

  • When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

    I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

    Concerning

    P. J.

    Hello

    1 did you change on your computer?

    I suggest you to follow the links and check out them.

    Method 1:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to contact Lexmark printer and check.

    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  • Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

    Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

    Original title: install a printer

    I see an error message about "spooler" problems

    A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

    If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

    To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

    To restart the print spooler service

    1. You must be logged on as administrator to perform these steps.

    2. Click Start, type: services , then press on enter on your keyboard

    3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. Right click on the print spooler service, and then click Properties.

    5. On the general tab, next to startup type, make sure that automatic is selected.

    6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

Maybe you are looking for

  • HP DeskJet 3632: Just check an automatic duplex unit cost?

    Maybe in the future, I invest in an automatic Duplexer for my printer HP DeskJet 3632. Where can I find a how would cost? Thanks in advance! Jesse Williams

  • Photo background activities occupie CPU completely

    Substantive activity of the photo occupies full CPU power! It is impossible to do anything on the device. During this time the imported Aperture (46GB) library has been expanded to 53 GB, without new imports! Recognition of faces should be done - at

  • You can access your itunes library on the apple tv?

    You can access your itunes library on the apple tv? If so, what generation?

  • Canon printer stopped working

    Original title: printer problem I have a Canon MP 560 model Copier, and suddenly, it no longer works.  Now it shows error B200.  I cleaned the print head and that did not work.  I need to replace the print head, or is there another solution that some

  • e9110t Power Supply Upgrade

    Good, finally found the power mentioned in my last thread and is been installed today. The only thing is that nothing lights up. Am I missing something? I reconnected it allt he same points with old food and here I am able to use my computer. It coul