Printer Epson Surecolor P600 problem
I have a problem with my printer Epson Surecolor P600. Support of Epson are blaming my MAC! I want to print a panorama on roll paper, but the printer will scale down the image to A3. I am an experienced printer Epson user, custom sizes are defined, no scaling is defined. Is it possible that the mac is causing the problem?
Thank you
Mike
If you have the latest driver downloaded from the epson site and this also happens when you print from non-apple programs then I don't see OS X intercepting the print job from the app for the epson driver and change what needs to be printed
If you are not using the latest epson driver then you probably use what epson printer has given Apple to include in OS X at a point in time that could be interrupted if they have not given a new since then, or it might be their printer have simply not support appropriate for the version of Mac OS X you are running that it's the same for some older models of printers
Tags: Mac OS & System Software
Similar Questions
-
My printer Epson DX3800 says that it requires a black ink cartridge, I replaced. But now none of the ink levels present on the system and it is always telling me that it is not black ink. Any ideas?
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp
Contact the Epson Support for problems with their product.
See you soon.
Mick Murphy - Microsoft partner
-
Epson Stylus 845Printer problem
I use a newer iMac (retina 5K, 27-inch, Late 2014,4 GHz Intel Core i7). I've just updated to OS X El Capitan Version 10.11.6.
I installed the latest OS X update a few days ago. Now, I have a problem with my printer (Epson WorkForce 845) connected wireless. The only way I can print is to put off the printer, restart and then immediately send the document to the printer. After a few minutes the connection is lost. I use the printer again. It worked, but only for a few minutes. All this is fine. Everything worked fine until I installed the latest update. I checked with Epson. The last recommended drivers (11.4) are installed. Any help would be appreciated.
If you close the quatiers use the LAN port instead of a WI - FI connection with a network cable CAT 5 or CAT 6.
If you are close to the computer, use the USB port (it is the best way to connect a printer)
If the device works then the problem is with your wi - fi and you can reset the device.
Recommended settings for the WiFi routers and access points - Apple supported
or rest the printing system
Troubleshoot printer on your Mac - Apple Support
or check your manual for the owner on the reset of the printer.
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Why my computer (HP Pavilion p6709c) lasts 7-8 minutes to talk to my printer (Epson Artisan 835), or not at all.
HP, Epson and verizon tech supports have not set in 4 months.
Hello
1. what operating system do you use?
2. do you get an error message when you try to communicate with the printer?
If you use Windows 7, try to run the printer Troubleshooter and check that if it helps, here are the steps:
Method 1:Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under hardware and sound, click use a printer.
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Method 2:
I suggest that you installed the latest drivers of printer and check.
Method 3:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
You can also contact the support site of Epson to known technical issues.
-
Cannot get from my Dell printer. I hooked but searching the Web for the installation of the printer comes with nothing.
Hi Velma Brown,
I see that you can not print. I'll help you with this problem.
1. What is the model number of the computer?
2. what security software is installed on the computer?
3. have you made changes on the computer recently?
4. What is the exact error you get when you try to print?
You can download the drivers for the printer Epson here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&infoType=Downloads&platform=OSF_W_XP-32
I suggest you to refer to this article and check if that helps.
Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028
Refer.
Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab4
I hope this helps.
-
I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color. Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device. I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.
Hello
You did changes to the computer before the show?Method 1:
Try the steps in the link and check.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575Method 2:
You can update the drivers on the manufacturer's Web site and check.
See the link to update the driver:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
Manufacturer link:
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesMethod 3:
Try the steps from the link and check if you are able to print.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows -
Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing
Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing
This looks like a printhead clogged for me.
It's more of an Epson problem than a problem of Windows.
Check the Web site of the Epsom for utilities seeking to lead the printheads.Here is a link to the CX6600 troubleshooting page:
<>http://www.Epson.com/cgi-bin/store/support/erscripts/start_er.jsp?BV_UseBVCookie=Yes&OID=41664 >HTH,
JW -
Tried everything - Vista still does not recognize printer Epson!
I have Vista Home Premium 32-bit. I spent HOURS trying to get my printer Epson CX7800 installed. I get the error unknown device and after trying to install the printer software, the message that the device is not working properly. The CX7800 is compatible with Vista. I have checked/tried this following:
- Installed updates for Vista.
- Tried to install the drivers updated from the Epson site. Installation cannot recognize that the printer is plugged in and turned on and closed unexpectedly.
- Troubleshooted on the Epson site. Followed their advice to uninstall/reinstall to the letter.
- Verified the printer on other computers running XP - works fine.
- I tried changing USB ports - all ports are good.
- FixIt ran from the Microsoft site - no problems found.
- Tried the Add Assistant printer - who cannot find drivers - even if I click on disc then point it on where are the downloaded drivers.
- Troubleshooted on the Dell site - have a desktop Dimension E521 - no luck.
- He spent hours searching for technical advice and do not yet have a solution that works.
Any help for that to be resolved would be LARGELY APPRECIATED. It's a question of Vista - not a problem with the printer or the computer. Argh!
I can't believe how easy the solution was... amazing that this simple solution has been so difficult to dig for!
All I had to do was go to the Device Manager and disable the PCI Standard improved to the USB host controller.
That's all! Turned on my printer and installed the software and I printed a page within 3 minutes!
How frustrating that it took me more than 30 hours to get this simple solution. But I hope that it can save someone else from countless hours and frustration.
I found the answer on CNET: http://forums.cnet.com/7723-12546_102-215320.html
-
Printer Epson C88 + won't print after new color cartridges replaced
Printer Epson C88 + won't print after that new color ink cartridges have been replaced.
Hello
· What happens when you try to print from the Epson printer? You get the error message? If Yes, what is the exact error message?
· Your printer is able to print a test page?
· What you are trying to print? You use third-party applications to print? If so, what application are you using to print?
Method 1:
I suggest you run the fix it is present in the article below.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
To further support I suggest you to check the article mentioned below.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
To get help, I suggest you to contact Epson. Click on the link below.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Setting up my printer Epson 2555 distance but what I'm trying to print goes to OneNote.
* Original title: configured printer
No computer! Setting up my printer Epson 2555 distance but what I'm trying to print goes to OneNote. How can I stop this?
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
This can occur if the printer is not configured properly or because of changes in the default printer settings.
I would like to know which printer is now set as default?
Method 1:
Check the default printer, set the default printer.
Change your default printer
http://Windows.Microsoft.com/en-us/Windows/change-default-printer#1TC=Windows-7
Restart the computer and the question of the cheek. If the problem persists, follow method 2.
Method 2:
Run the printer troubleshooter.
Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.
__________________
Thank you best regards &,.
Isha Soni
-
Cannot print from printer Epson Stylus Collour 850
Original title: Epson Stylus Collour 850 printer
I have a printer Epson Sytlus color 860, connected to my laptop but it cannot print.
Hi Sibanda,
This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.
Do you have an error message when you print from Epson Stylus Color 850 printer?
I suggest following the steps mentioned in the link and check:
Solve printer problems
Check out the following link to download and install the latest printer driver for the Epson Stylus Color 850 printer:
Please answer us on the State of the question to help you further.
-
Hallo printer Epson BX525WD Print niet.
Hallo printer Epson BX525WD Print niet.
Download the latest driver from the following link:
http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/3950
Your version of Windows will be automatically detected:
You can also run the troubleshooting of the printer.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems:
http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer difficulty of:
http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
-
Incompatibility of printer Epson LQ-680 with Windows 7, 64-bit operating system
Incompatibility of the printer Epson LQ-680
I got a new machine (with Windows 7, 64-bit operating system).
Earlier I had been using an Epson LQ-680 with a serial cable.
The new machine has a USB port, so I have to use a USB to PS/2 port.
I installed the Energon USB but still cannot print.
Incompatibility of the printer Epson LQ-680
I got a new machine (with Windows 7, 64-bit operating system).
Earlier I had been using an Epson LQ-680 with a serial cable.
The new machine has a USB port, so I have to use a USB to PS/2 port.
I installed the Energon USB but still cannot print.
I read your post with a lot of attention. There seems to be some confusion on your part. I want to arrempt in order to clarify the information so that a good solution might be found for your needs.
The Epson LQ-680 is a matrix printer with a print head 24 pins. It is designed to use a parallel port. This means that its computer interface conforms to the IEEE 1284 specification. This is often referred to as a Centronics parallel port. Series No.
Thus, because your computer does not have a port for a direct connection, you must use a parallel to USB device.
Not all of these devices are supported printers. Please check the specifications of the device that you use to connect your USB printer and confirm that it supports the printers. It is preferable that it supports bidirectional printing through the device. If it is not the case, getting the arrangements put in place for this printer could be a problem.
Driver for printer:
=================
You did not mention whether your machine is a laptop or computer desk/workstration. If the latter, and if she will allow to install PCI cards or PCI-E, install a parallel port card would work more simply.
If you want other help, please let us know the make and model of the parallel to USB device.
-
Windows cannot print due to a problem with the installation of the current printer.
Thread title: Epson TX235W will not print
When I click on 'print', I get the print control. the box that tells the printer how many copies, etc. When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer. Try one of the following:
Check the printer by printing a Windows test page
Ensure that the printer is online and on
Reinstall the printer driver
I did everything above and I get the same result.
Help!
Hello
Did you of recent changes made to your computer that caused the problem?
This problem is limited to a particular application?
How is the printer connected?
Method 1) restart the print spooler service and delete the print queue
Start the print spooler service in the Services console
- Click Start and run, type services.msc, and then click OK.
- Right click on the print spooler service, and then click on stop.
- Right click on the print spooler service and then click Start.
Start the spooler service for printing at the command prompt
- Click Start, run, type cmd, and then click OK.
- Type the following commands at the command prompt:
net stop spooler
net start spooler
Output
Note: Press ENTER after each command line.
Cancel printing
http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing
Method 2) remove and add the printer and then check.
Add or remove a printer (Applicable for Windows 7)
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
It will be useful.
Maybe you are looking for
-
I want to copy my 'Contacts and calendar?
I want to copy my 'Contacts and calendar' of my Mac Pro for my new mac mini is where the data files?
-
Bought a usedHP Pavilion dv7 6c64nr. I had to install everything from scratch. Look for the link to the graphics drivers for Windows 7 (64 bit) 6c64nr dv 7. p.s When I looked for it on the Web site, it would only give me a link to the AMD graphics dr
-
How to remove windows pc repair
I would like to get rid of windows pc repair it is everywhere. Moved from IE11 > unknown
-
I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key or any body help, I can't use it
-
Randomly get stop error. Generally, within only 5-10 minutes and even if no one is using the system. Sometimes on initialize toward the top. CHKDSK no error. Exchanged cards with another computer and the same mistakes video Start of Ubuntu live CD an