Printer error: "Unsupported personality: PCL.

Similar Questions

• HP Laserjet 1010: Unable to print. error message "unsupported personality: PCL.

  Hello!

  I had my old HP Laserjet 1010 installed on my HP ProBook 650 G1 sucessfully. Yesterday interrupted with an error message like "personality unsupported PCL"

  Can help you...

  Concerning

  Raimo

  Raimo1 wrote:

  Hello!

  I had my old HP Laserjet 1010 installed on my HP ProBook 650 G1 sucessfully. Yesterday interrupted with an error message like "personality unsupported PCL"

  Can help you...

  Concerning

  Raimo

  Hello

  http://h30434.www3.HP.com/T5/LaserJet-printing/unsupported-personality-PCL-on-LaserJet-1012-printing-from/TD-p/470237

  HP will not develop a Windows 10 driver for this printer. The best option is to buy a new printer or get a laptop computer with the operating system prior to Windows 7 because this error occurred on Windows 7 computers due to inadequate software support driver for the printer. Perhaps a simple shooting turn also works as described in the link.

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• Unsupported personality: PCL - HP Laser 1010 printer problem

  I have installed my HP Laserjet 1010 with the software for HP1015 in Windows 7. Yesterday, I was able to print. This morning was an update of Adobe and now my printer doesn't work anymore.

  Can someone help me with this?

  Hi Vijay B,.

  I don't get a message on my computer, but on the paper, and it is "unsupported personality: PCL.
  Your en 1 2 method did not work, but now I have installed another pilot and my printer :-) impressions
  Thanks for your help.
  Erna

• MX920 printer error state

  "printer error state," no is not discussed anywhere I could find.  Does anyone have a clue

  reverse this...?

  [Mod Note: deleted for your protection personal information.] Please see GUIDELINES of the FORUM]

  Hello nichfinder77!

  Welcome to the Canon Forums! The Forums are not intended for immediate assistance. If your question is of an urgent nature, please contact either by phone during business hours or email 24 hours a day!

• Error HP M1536 PCL XL or reverse PDF document

  Hello

  We're going to get in trouble with a printer all-in-one m1536dnf one of our customers recently acquired. The printer itself is connected to the network via an ethernet cable and computers that are like him either by cable or wireless. They are all using Windows Vista or Windows 7.

  They seem all print correctly, with the exception of a few PDF documents from some of their clients. These documents do not print either and we get a print to a PCL XL error (when you try to print from Adobe Reader) or print, but with black background and white text (Foxit Reader).

  The PCL XL error is:

  PCL XL Error
     Subsystem:     KERNEL
     Error:         ExtraData
     File Name:     kerlib.c
     Line Number:   9024
  

  We already tried things:

  -update of Adobe Reader and Foxit Reader

  -updated printer driver (unfortunately there is only one version available: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3974... )

  -update the firmware of the printer

  -Reinstall

  -installation via USB or printer sharing

  -given a page ( http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00064499 ) describing our problem, but couldn't find a way to move to a PCL 5 driver

  -using the generic driver is found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4157320&...

  -installed on a PC with Windows XP

  It appeared at one point that a solution was to change the printing resolution of 600 to FastRes 1200 (both with active EconoMode). However, after doing this another document presented with the same problem. It may not seem like a serious question to some, but with a bunch of users who have only basic knowledge on the use of computers, questions like that can turn large problems.

  We also have little information on PDF documents and their source, but as far as I could understand at least most of them is generated by scanning from other multifunction printers.

  We also bring the printer to our supplier and explain the problem. We could also demonstrate with a PDF file but could not leave the file with them due to privacy issues. They tried to print with the generic driver but no joy as the matter kept showing. If we send it to the guarantee that they will most likely print a certain number of documents and to say, it works well (I'd do the same in their position ), that's why I was wondering if people here have the same problem with this printer or have ideas on how to solve it.

  Thank you in advance,

  Eugen Sechel.

  Hello

  Sorry to answer so late. We solved the problem by installing the HP Universal print driver PCL5 version you can find here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4157320&prodTypeId=18972&prodSeriesId=503548&swLang=8&taskId=135&swEnvOID=4062 .

  This seems to work around the problem and also allow us to use the features of the printer.

  I guess the test that the guys at the service was incorrect, that it seems to work for us.

  Sandy_Sanz, I don't know whether we also tried on one of the computers. If I manage to test it some time, I will do my best to come back with more information. Thank you and I would mark your post as solution as well if I could .

• General HP 8600 printer error

  We bought this new printer to Costco for more than a year. He began to send me general error message just now. I have replacement cartridges in it (not factory HP) and they are full and not leaking. For some reason it won't print with them. I bought also a CISS system for it earlier and he gets the 'General error' message with him as well.
  I tried to reset and sometimes it works, it would reset (pull cable from the printer while the printer is turned on) it would show that the cartridges are full and he puts himself in 'cleaning up' and all of a sudden it gives me "General printer error" without specific code.
  I removed all the cartridges, and then I tried the following:

  I would setup Magenta cartridge and it would show me the rest of the cartridges are missing

  I'd install the Cyan cartridge, and it shows the rest of cartridges are missing

  I'd install black cartridge and it shows the rest of cartridges are missing

  If I install the yellow cartridge, it goes into "the General printer error.

  I wonder if it's a general malfunction with head of printing or something else?

  I called HP customer service, but they were less than helpful. Basically told me to reset it (by pulling on the cord) and see if it works, has not. HP person then proceeds to tell me how their printers are and asked me if I wanted to buy one! I was very anxious at this moment there, I spent several hundred dollars on this printer and I just want to make it work. Its a great printer - when it works.

  So I wanted to just update.  I didn't need printer for awhile until the end of last week and I decided to tinker with it even more.

  I researched still more and saw a video of someone rinse a print head in warm water under a sink. I decided to do as a last resort. After I rinsed, I dry real and reinstalled. I reinstalled cartridges installation and the test page printed printer. Ive printed several pages again later. I changed cartridges of the CISS system installation and printed a few pages to test and it works fine! Looks like it might have been just blocked and had to be rinsed.

  Printer works again and I hope to keep working for a long time. I was considering using it as a target shooting, perhaps at a later time, then

• How can I export my book in Adobe PDF format without it abandoned with a message "printing error"?

  I use Adobe InDesign CC 2015 on Windows 7 and a book with several chapters, each chapter being a separate document. Several attempts to export the book to Adobe PDF failed with the following statement:

  "Printing error: Adobe Print Engine failed at the end of your data due to an unknown problem."

  When I run the command 'Package book for print', it shows that there are some fonts and missing images. However, as far as I know, I replaced all the missing fonts and I'm unable to see all missing fonts or images on the computer screen. Person documents in the book export to Adobe PDF with no problems, but the book does not print as a whole, affecting the table of contents and the page numbering (e.g. Roman in the front-end vs Hindu-Arabic in the rest of the book). I'm frustrated because InDesign doesn't tell me what the problem is. I'd appreciate any help in this regard.

  No, I wasn't trying to PRINT to PDF. I tried to export the book in PDF format in following file > export... and then click on PDF for output. That did not work. However, I just realized that I can export the book by clicking on the small arrow in the upper right corner of the menu that shows all the documents in my book (I don't know how it's called). From there on, I chose "export book to PDF...". "and voila! It worked.

• Printer error

  Unable to print, error: has no filter

  Mac mini mid 2011 8 GB of memory, 2 external SSD 1 1 TB for time machine backup drive.

  Also cannot restore to the end version that el Capitan in Time Machine the botou is not accessible?

  Try to reinstall your printer driver.

• Printing error: setcolorspace

  Hello

  I never had trouble printing to my office, but recently, I get a print error regardless of the document to print. I downloaded the latest driver from the website of the society of the printer to see if that would solve anything and it didn't.

  Printer: Kinoka Minolta bizhub c224e

  OS: OX X Yosimite 10.10.5

  ERROR: ioerror

  OFFENDING COMMAND: setcolorspace

  BATTERY:

  [/ CIEBasedABC - dictionary-]

  Any help is appreciated.

  If you haven't already done so, try to reset the printing system.

  OS X Mavericks: reset the printing system also of Yosemite

• Printer error 0x610000f6 General

  How can I fix "Général Printer Error 0x610000f6" for HP Photosmart Premium C309a of all-in-One?

  Hello

  this article seems to cover the kind of error you get. give the steps described a try and tell us if it helps.

  Good luck!

• I'm unable to print using firefox message is 'unknown printer error' no problems with other browsers

  I tried to print a coupon to an e-mail and the message I got was 'unknown printer error '. I am able to print from word and other items on my desktop as well as another browser. I can't print anything using Firefox. I have not updated recently, and the problem seems to have occurred spontaneously. Can help you.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the preferences for this printer.

• HP Officejet 4630 series: printing error

  Hello

  My printer was fine until 'Windows10 update 1607' has been downloaded on my desk a few days ago. Now every time I try to print anything for my computer. Status reports "error-printing".  I ran the trouble shooter print a test page, I printed a report of diagnosis of HP print and Scan doctor. Everything seems fine, but it always brings a printing error. So now I'm re-printing a document, it now says "printing" on the device, but it feels very, very slow, 10 minutes and it's still printing the first page. What can I do to fix this?

  Your help in this matter is much appreciated!

  Welcome to the community @BeeAnn HP

  I saw your post on the slow printing problem and wanted to do some of my own suggestions.

  You can try the following:

  1 reset the printer, then restart the computer. Make sure that the printer is connected directly to a wall outlet.

  Turn on the printer.

  With the printer, unplug the power cord at the back of the unit.

  Unplug the power cord from the wall outlet.

  Wait at least 15 seconds.

  Plug the power cord into the wall outlet.

  Reconnect the power cord to the back of the unit.

  If the printer does not by itself, press the Power button to turn it on.

  2 run printing scanning and Dr.

  3 try to make copies to see if they are too slow. If they are, then it's showing us that there is a problem with the hardware with the printer.

  4. Uninstall and reinstall the printer driver and software.

  Let me know how make you out!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Photosmart HP 7520 e-all in one printer - printer error

  The printer gives a not useful message. It says "Printer Error" and I have to restart the printer. Blinking text and all the four icons on the sides.

  Does anyone know this problem also?

  I just bought this printer and installing the printer the printer software is also updated.

  Thanks for your help

  Thanks for all the help.

  I returned the printer shop ro. They tested the printer and found no errors.

  I talked to a technical guy in the shop and he told me that my wifi router was the problem. I had to download the utility "inssider". as utility showed me that the channel of my router was on was very busy. I changed the channel on my router to a different channel and everything is fine after that.

  I hope I helped other people with this solution.

• P3010: HP laserjet P3010 stops printing after a person especially prints a page

  Hi guys,.

  I'm in a space small office where we are 5 people. After a page prints a particular person, others may not print, and we need to restart the printer. It seems that the problem might be the specific person's computer since he just changed laptops and the same thing happens again. Any suggestions?

  Okie dokie, thank you for all the prompt answers that you have provided to me.

  Looking forward to hearing good news from your part.