Printer HP 6500 E709n - impression is very low, even after the new cartridges installed

New cartridges installed correctly, and there is no error message. But now, the impression is almost unreadable it's so light. What is the problem?

I understand that you are having problems print quality with low impressions.  I've included a useful document that might solve your problem.

Let me know if it helps.

Tags: HP Printers

Similar Questions

  • HP Officejet Pro 8500 a: printers print only after the new cartridges installed

    Whenever I put in new cartridges I have problems with the print head alignment, then it usually printed.  This time, he was sitting with cartridges empty color for awhile and now it does not print at all.  I always use only the new HP cartridges.  It fails the alignment and the blue and yellow and sometimes the magenta show on the sheet alignment.  What is the print heads?  Why would I need to change them whenever I have to add ink cartridges new which makes no sense.  I have never changed them, but they worked very well until I added the new ink.

    Hey @janh1058,

    Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

    I understand that e-all-in-one-HP Officejet Pro 8500 a your printer is printing is no longer.  I would like to work with you on this. I have a few suggestions that might restore your printing capabilities.

    It could be that the long period of inactivity of dormancy has dried the print head, even if you have made the right choice in leaving the cartridges installed in the printer.  I recommend you try the following basic troubleshooting steps before embarking on a manual print head cleaning more intensive:

    • Click here and clean the printhead automatically via the front panel of the printer, as shown in the second Solution.
    • Repeat three times if you still have print quality issues.
    • Remove and reinsert the cartridges once more with the printer to force the printer to print a different allignment page.
    • This to improve the print quality?

    If you use always the same question, I have a few more advanced troubleshooting tips:

  • HP3070A:printing (happy) box appears rotated at very low angle in the...

    HP3070A I bought this printer, but what print or photocopy... for example a page with the content with a border (to create a box), left, right, down, margin superior 20px in Crete a wide area of page, although the (happy) box appears rotated at very small angles so have... above for example top left distance top 17px and top distance correct top 20px (gold 21px i do not know exatly only the difference know 2-3 px left-right top border to the top of the page)... Well?

    as I say cannot correctly insert the paper in the tray, which is difficult for this printer this action, what should I do?

    This exact video for you, Ise. I hope this helps!


  • Aspire V 15 Nitro sound very low even when the value to 100%. Does anyone have a solution?

    Dear community,

    I tried clicking on the sound icon.

    By selecting "playback devices".

    Clicking Tealtek High Definition Audio, and then click Properties.

    In "Improvements" all I have is a box unchecked to "disable sound effects everything" and nothing else. so, I can't find anything to change.

    When audio is playing on the icon settings sound is 100%, but the green bar is only part of the lower part of the bar.

    The sound was working fine last week. I don't know what I may have accidentally made.

    I would like suggestions or ideas.

    Thanks D.

    Dear IronFly,

    Thanks for all your suggestions. I just found out what caused the problem. A recent update for the onboard sound of Acer apparently gave it priority over Nvidia. To give priority to Nvidia and then by restarting the computer, its a was restored in all its splendour. If all goes well, this solution can help people who have lucky on a similar problem.

  • The screen of very low brightness after a new installation of LED panels

    I recently changed my screen was cracked and paid for it as physical damage are not covered by the warranty of my SVE15136CN. A few days later, the new screen developed a black spot on the left which has increased significantly every day. So I gave him in the center of service again. The service man now says he has changed the screen, but that's a new problem. After the first start, the screen works normally. After a few hours, the brightness is extremely low and not back to normal even after handeling options brightness and power through windows or change the graphics driver. Nor did the change in brightness after plugging in the charger, as it shud be ideally. After three weeks, he suggests that my screen cable is defective not allowing not my screen to win enough power (then how to get enough power to start?) or even the motherboard needs to be repaired for damage. (how it works for the first start?). I feel that something is fishy in this regard. Tell me if it is possible everything that happens? How shud I proceed?

    Hi mihirvd,

    Thank you for considering the Sony community!

    We are sorry to hear the problem you're having with your computer. Another moderator has already answered your question on this thread: VPCEE31FX starts and runs for a while and then the screen turns white can anyone help please

    It's already a hardware problem and we cannot proceed with troubleshooting. We strongly suggest to ensure coordination with the Sony Service Centre. They know the process and they are well informed on how to repair your device.

    For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region Due to the proximity, they are in a better position to respond to your questions or concerns.

    Kind regards


    If my post answered your question, please mark it as "accept as a Solution.

  • printer does not recognize the new cartridge installed

    How can I get my HP deskjet printer to regonise I installed a new HP cartridge.

    Had to replace 2-magenta fine;  black photo (2 new cartridges tried) message-no ink.

    Have cleaned the contacts on the cartridge & printer. still no joy. What can I do next?

    Hello! Had a second go to cleanup & reinstall & all works well.

    Thank you!!

  • F4480 printer does not yellow, even with the new cartridge print

    I ran a diagnostic test and he said pan into the left chute has 1 or more lines short-circuited control.  Anyone know what to do?  It prints magenta and blue, but not yellow.  I tried 2 different cartridges and they are both the same.  (It is new).

    It looks like a mistake material Dorothy, the printer may be on its last leg. Try following the steps as much as possible of this document (do not buy more new ink)

    If this does not work, I would contact HP support to see what options they can offer you: 1-800-474-6836 or

  • My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

    I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.


    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

  • Printer HP 6500 E709n will not print full color

    My printer HP 6500 E709n shows all full color cartridges, but is all green print only. I'll try to clean/wipe the head of the cartridge, but I don't see a cleanup on this printer option. And if this isn't the problem, the screen showing all cartridges in full would be incorrect?

    Hi Jan,

    Thank you for visiting Microsoft Community.

    From your description, I understand that the printer only prints in green.

    I suggest you contact HP support for assistance on this issue:

    It will be useful.

  • My printer officejet 6500 E709n is locked.

    my printer officejet 6500 E709n is locked.  He has a job in Quebec that has been

    in the process of deletion and frozen.  What should I do?

    Hi, you can restart the computer it must clear the print queue.

  • Impressions of gray out red when the yellow cartridge is empty

    Is it possible to get the printer (Officejet 6500 - E709n) to print a black and white text to grayscale with a cartridge completely black and a yellow cartridge is empty?  (I still haven't a full set of cartridges full Exchange.)

    Sorry you had a problem with the printer prints only not the correct colors when the yellow is empty.

    Need you some yellow ink cartridges in order for black print correctly. Color cartridges will blend with each other to make a true black color.

    So, you will need to replace the color cartridge or yellow first.

  • My HP Officejet Pro Wireless is not printing black even with a new cartridge.

    My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!


    Of course check that the cartridge is very savvy.

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP support/troubleshooting & drivers

    Contact HP

    HP forums


    The main issue is probably the drivers, but these can help:

    Add or remove a printer

    Solve printer problems

    Open the printer Troubleshooter

    Find the manufacturer's Web site

    Find and install printer drivers in Windows 7

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • DeskJet 2132: Do not print with the new cartridge

    I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

    I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

    I tried to put back the cartridge several times and made sure the protective film is removed completelu.

    I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

    HI @saking88,

    Welcome to the Forums of HP Support!

    I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

    HP DeskJet printers 2130 - color or black ink print do not.

    This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.
  • Bad print quality with the new cartridge

    I replaced the cartridge on my HP Photosmart c4680 printer a few weeks ago and the print quality looks as if it is low on ink. I followed the instructions on alignment after installation and made sure that I installed the new cartridge. There is no prompt that the ink is low. The other weird thing is sometimes the printer does not start when I turn it on. The screen reads HP and he begins to beep every 10-15 seconds or more. This problem occurs intermittently, but began after the installation of the new cartridge. Would appreciate any help to solve these problems.

    (1) pull the cartridge out and reinsert it, if there is a latch to ensure she fully locking up.

    (2) your HP software for the printer should include several utilities, one such utility is to print a page of 'Test '. Run that usually it will clean the print head.

    Now try printing one of your documents.

    J W Stuart:

  • HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

    Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

    Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.

    You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.

    If this does not resolve your problem, you may need to replace the print head.
    Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.

    Let me know if this can help, thank you.

Maybe you are looking for