Printer HP C310 hung wireless for MacBook Pro does not allow me to choose printing options.

Similar Questions

• My MacBook Pro does not allow the installation of Adobe Flash Player?

  The process goes into installed as needed, but at the end a Setup error comes in effete on-screen with a finish?

  How you install?

  Where did you downloaded it? Of the Adobe site?

  Of the Adobe site?

  Maybe this will help you:

  Adobe Flash Player available for OS X on June 20, 2016 - Apple Support

• My macbook pro does not detect my s6 (connected via USB). How can I solve this problem

  I tired to connect my phone using the usb cable, macbook pro does not detect my phone as a media device, but the phone is charged. Y at - it a patch or an app, I need for macbook pro to detect my phone.

  Thank you

  If you expect to be recognized in the Finder, note that it is not designed for it. Admittedly, in the Capture of images, Photos or iPhoto if there is no picture on the device.

• ITunes on my old MacBook Pro does not recognize my new Iphone

  ITunes on my old MacBook Pro does not recognize my new Iphone... but apparently I can't download the new version of Itunes to this model of MacBook Pro? (according to the message that I get)... So I can't transfer my photos / apps / data, etc., for my new phone... Does anyone have advice?

  Thank you

  It is not so much the Macbook Pro model as what operating system your help, for example, if you're running Lion and trying to download Itunes for El Captian. Impossible to run your operating system which. Updates for your system come from apple. Ether through a software update or the Apple app store. Generally, you will receive a notification if an update is available. What operating system you're running and what Iphone model? IPhone 6plus has for example need OS 10.7.5 or newer.

• MacBook Pro does not recognize my SD card?

  My MacBook Pro does not recognize my SD card, even with an external card reader. However, this same SD card can be read through my iMac. Don't know what I'm doing wrong here, but I'm going abroad and would like to be able to download my pictures I'll.

  You didn't say what model / year is your MacBook Pro.

  I found this video, don't know if it applies to you. https://www.YouTube.com/watch?v=nbc0l-t3f1Q

  Kim

• My macbook pro does not connect to Time Capsule

  My Macbook Pro has not saved for a few weeks and does not connect to the time Machine.

  Whenever I try to connect, I get a message saying check the IP address. Everything else works - i.e. wifi is working, etc. But for some reason any time Capsule of the functions are lost.

  Please can someone help.

  My operating system is OS X Yosemite 10.10.5

• OfficeJet Pro 6830: MacBook Pro does not print wirelessly for Officejet Pro 6830

  I used to have an old HP Officejet 7210 who was once able to print wirelessly from my MacBook pro, but at some point, wasn't able to do wireless and had to print with usb connection.

  For Black Friday, we bought an Officejet Pro 6830 and on internet I downloaded the latest driver for my MacBook Pro and my windows laptop of wifes and our desktop PC. The mobile office and windows had no problem, but once more, I was not able to print wireless from the MacBook Pro. When I try to print wireless the printer dialogue indicates he's trying to deal with and then it says "the printer is currently in use". So I'll still have to plug the USB to print with this new printer is less than a month.

  I was able to print the wireless test page and he noted that the test page bypassed print drivers. In addition, I am able to go into the printer utilities and see how much ink, I have and the various settings of the printer but I just cannot print documents from applications wireless.

  Any help would be greatly appreciated

  Hello

  First of all, do not forget to reboot your router by unplugging its power for a while, then let it 2-3 minutes to reboot and restart the printer.

  Make sure that the printer is connected wireless and blue wire it light.

  Try now to go to System Preferences > print & scan and click on the sign more. you see the printer listed?

  May you had prior display the problem started with your previous printer? for example a new router, changes of settings, etc. ?

• LaserJet P1102: printer connected to the macbook pro does not let me print double-sided

  I have a macbook pro and an hp laser jet p1102 printer. I checked the duplex printing option, and then the printer printed the first parts of the document, I wanted to print. Then a message appears - "manual Duplex: without changing the orientation, remove the paper from the output of the battery tray and insert into Tray 1 print side down. Do not discard the blank sheets. Then, press the button to go. " I re-inserted paper, but then what I do next as I don't know where this button is Go! Help, please

  Hi @insy,

  I have read your message and see that you are trying to print manual duplex and you get the message to press the Go button. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem. Do not take into account the operating system in the title. A solution for this problem is developing. Check the HP website for updates of software and firmware.

  HP LaserJet Pro P1102w printer - Macintosh: only manual duplex printing prints on one side in OS X Version 10.6 when it is connected to a wireless network.

  Good day! Thank you.

• New MacBook Pro does not print 2 sides on Photosmart 3210xi

  Signed ol ' HP for the new MacBook Pro with OS X 10.6.6 USB cable, and he finds the HP.  Then toured to update software to currently do.  One of the printer boxes display correctly the HP to be equipped with the print side 2 on the back module and checked, but it is not printing 2 sides.  This system has no solid range of choice than Win7 - what is with that?  Someone at - it a method to obtain this HP Print on both sides of the paper?

  Thank you

  Bill

  Hello HP,.

  I found the real solution, thanks to a bad hard drive on a new MacBook Pro, who died just before the spirits high at their altar in the Apple store here.  He was just 12 days old.  They gave me another new MacBook Pro.  While the implementation here at home and to have met with the Photosmart 3210xi he seemed to do ok, but again, it wouldn't make impression on side 2. And not after the MacBook made the update either.  So I tried the manual visit to HP - no help.  Unplug the printer and uninstalled the printed stuff.  Stop. Started and went to HP and downloaded the driver 10.3 me connected and turned on the printer when the installer wanted.  Printer worked and printed 2 sides.  The MacDonalds its software update and thinking, I saw something strange about one of the dialog boxes, all when trying to print after the update: 10.2 Driver. What?!  And no 2-sided, once again.  Fact the entire removal and install Driver 10.3 on but without having the MacBook again the software update. Now it prints 2-sided.  

  I'll tell Apple about it.

  In the meantime, it will help if HP would update what list you provide to Apple for their updates, which would help. Thank you!

• My MacBook Pro does not start all of a sudden upward

  Hello

  I turned my MacBook Pro yesterday and when I went to start it up again today, I pushed the powerbutton comes the startup sound and clear grey screen with an Apple comes up with a progressbar under. about a cm from the bar gets full and then a code appears on the screen for a few seconds, then the computer tries again to restart and it circulates in a loop. I took a photo of the code that is displayed for a few seconds and attached to it.

  What should do?

  I have timemachine copies the MacBook on my TimeCapsule, but I have no idea how to use when the computer refuses to start.

  Try:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer after the ring, press on and hold the

  COMMAND and R keys until it appears the Utilities menu screen. You can also restart the

  computer and after the ringing, press and hold down the OPTION key until the Boot Manager

  the screen appears. Select the Recovery HD and click on the arrow pointing down.

  3 fix the hard disk and permissions: at startup, select drive in the Utilities menu utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  4 reinstall the 10.10.5 update: OS X Yosemite 10.10.5 Combo Update.

  5 reinstall OS X: Reboot of HD recovery Select reinstall OS X in the Utilities menu, then click on the continue button.

       Reinstall the 10.10.5 Update: OS X Yosemite 10.10.5 Combo update, if necessary.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Scan on Macbook Pro does not.

  Hi, my MacBook Pro (OSX El Capitan) is no longer will allow me to scan documents. It connects to printers and prints still, but the scanning program that used to come to the top when I'm connected to a scanner appears more. I tried to reset the printing system, but that didn't seem to work.

  Thank you

  Is this scanner brand/model?

  Perhaps it is that you need a driver update from the supplier in order for Mac OS X to recognize the scanner device.

  If you use a third-party application it can while you need to update this application to work with El Cap.

  Many (most) scanners should work with the built-in scanner (System preferences-> printers and Scanners--> Scan) software

• MacBook Pro does not charge

  I feel that this question is asked a million times, but I'd like to walk you guys through my situation.

  Retina Macbook Pro 2013 (out of warranty of course) in excellent condition. Fully updated software.

  A year ago, I had a problem with intermittent loading. Of course, I went online and followed the instructions on resetting the SMC. Sometimes it would work, other times not. Sometimes the software updates would trigger the loader to activate when the system is restarted. I would like to try various outlets around the House with none of them work. Is my next laptop Apple certified tech and is it charged out of their fine magsafe charger. I thought, cool, I'll buy a new charger. I understand House and it does not load. This process is repeated for a year. I could get the new charger or one laptop comes with to work. After a time I kind of nailed what I could warm up the bricks of charger with the warmth of the body and get them to come. Kind of weird but it worked... sometimes. If fast-forward a couple of weeks. I could not the computer to load at all. I took a day and I have tried everything in the book:

  • Resetting the SMC
  • Try the different points of sale
  • Warming of the charger
  • Update the system software
  • Leaving the charger unplugged for hours and try again (it of in case of dirty power coming out walls and locks the charger?)

  So I took it to my local tech again and it started to load automatically off not only their Chargers, but both of my friends... He performs a reset SMC, talking about me on the House of tension circuits and sends me on my way, pretty confusing. I get it home and charge the battery to 100%, but two weeks later here I am again with a Macbook Pro which does not load... This time I even tried to load out of a UPS System.

  I consider myself very savvy computer, especially with the Mac. I have a decent background in electrical systems of the classes I took in high school and college. I read the manuals, I do my homework, I take excellent care of my devices. But honestly, *...

  Any ideas would be appreciated. I'll take in addition to anyway. My local tech makes an appointment and I can't get an appointment of bar genius until next week. I have a laptop dead at this time.

  I do my homework,

  Certainly, you made and excluded from all the obvious concerns besides a few non-obvious. The only remaining uncertainty, I can suggest is your domestic food, since your Mac seems to load very well everywhere else. Power of the Mac adapter intelligently will close if it detects bad quality. Other than to call it 'noise' Apple is characteristically silent when it comes to debate just what are the parameters it uses to accomplish this.

  Most inverters do much through food. An alternative is to use a 'real online' or 'double conversion online' UPS, which are more expensive because they are still deriving their battery power, thus isolating their input and output power. Another esoteric alternative that I don't necessarily recommend is to use a ferroresonnant transformer. They are inherently inefficient, but concretely achieve isolation even.

• MacBook Pro does not start after asking password

  My MacBook Pro asks for my password, then the password window disappears as if it is going to start but then it asks for the password again. This happens again and again and again

  It will start in safe mode (hold the SHIFT key down as soon as you hear the ringing tone)

• Excel files created on a MacBook Pro does not open on PC

  Hello

  I created a large number of worksheets with the help of Office 365 for MAC on my MacBook Pro (OS X - El Capitan 10.11.6) and then transfer them to a computer that uses Office 2007.  Since week last I was able to open spreadsheets on my PC but I get a warning on the PC that said to check the file comes from a reliable source because that might have viruses that are dangerous for your PC.  I click Open anyway, and the file will open IF you do not see the data.  You do not see the cells.  However, you can see the number of cells and worksheet data in the Ribbon at the top of the screen.

  I tried:

  various parts and get the same problem.

  Reinstall Office 365 on my Mac and Office 2007 on the PC.  No change.

  Change the version of xlsx to an earlier version.  No change.

  I looked the preferences on my Mac to see if something has changed.  Nothing has changed.

  I have installed a new software

  I did not put up-to-date Office 365 or my Mac software

  Does anyone have any suggestions on what I should look on my MAC?  I posted questions about the Microsoft PC to see if there a problem with 365 I really dislike?  Help.  I have a spreadsheet that is massive, I don't want to have to recreate on a PC, simply because I can't open it.

  Thank you

  The problem is Office 2007 on PC. You must either 2010 or higher without converter. 2010 and more have an automatic converter for the most recent files, but 2007 will not work. Go to the Microsoft website and you should be able to find the converter here. When the college so I have to work changed in 2010, had to add a tag to our emails with a link to the converter for people using older versions of Office.

  After reading your post again, you should be able to save the spreadsheet as a version of Office 97-2003 and be able to open it in Office 2007, but if you still have difficulties, this add-on for Office 2007 must repair.

  You can go there. I knew what to look for.  https://www.Microsoft.com/en-GB/download/details.aspx?ID=3

• MacBook Pro does not stop.

  My MacBook Pro will be stop or restart.

  Hello, Steve840!

  Thank you for joining the communities Support from Apple! Looks like you have a problem closing the Mac. I know how it is important to be able to stop and restart the computer as well. Here are a few troubleshooting steps that you can try. Go through each of them at a time and see what step fixes the problem:

  • Try to determine if a particular application is the source of the problem. If an application always crashes when you stop and cancels the process then update or remove and reinstall the application. There could be a message that is displayed by saying that an app has cancelled the restart or shutdown. Read this article toForce an app to close on your Mac.
  • Perform a software update (open the App Store, then click on updates > update all).
  • Update any software that you have installed outside of the App Store. In general, open the app and choose Help > update > update software.
  • Make sure you have FileVault disabled (System Preferences > Privacy & Security > FileVault > turn off FileVault).
  • Open disk utility. Choose the main hard drive and click on check the disc. If there is no problem, click Repair disk.
  • Follow these steps to reset the management system (SCM) controller on your Mac. This removes the startup items and conduct audits to see if something in the background can cause the problem. Don't forget that you can always press and hold the power button on the MacBook, until it stops to completely power off to restart.
  • Follow these steps on How to reset the NVRAM on your Mac.

  See you soon!