Printer HP C509a range: new/still a problem with the C309a with wireless printing

Printer is now, do not print, then all the sudden days later, it will print what was in the reference. I checked everything I know how to check. I think to unstalling the software, but when you do that... There is ALWAYS something that lingers to create a problem during the installation again. Is there a good way to get rid of the computer of all the files that relate to the printer?

OK, here's where I am. Computers 3 1 HP printer. I removed the HP software. Reinsall after I did the "usbready.exe" file in order to load the software.

http://h30434.www3.HP.com/T5/printer-software-and-drivers/C309a-software-will-not-install/m-p/5476271#M79658

FYI

1 computer is wired 150 ft. - works fine. The other 1 computer (wireless router) to the point of HP printer

works very well. It is the 3rd computer wireless to the router but does not work. The software, see TI but not install and plug. In one of 3 different choices. Now, I got a little my limits. I'll try to go in the "devices and printers" see on adding a printer and see if that can cling to the top. He is a friend and 24 far mi but needs to be done. The choice of HP software is the USB connection, Ethernet connection and wireless connection. All 3 see the printer but do not begin upward.

Get it!... see red

Tags: HP Printers

Similar Questions

  • E4200 w 2 - re1000 and still have problems with wireless coverage

    I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

    For my Apple TV and tower PC, PS3, I used a wired connections.

    But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

    Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

    Here is what is a must:

    One SSID in the House

    Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

    Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

    I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

    I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

    Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

    The only unknown is your neighbors (and other sources) Wireless interference.

    You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

    http://www.MetaGeek.NET/products/inSSIDer/

  • Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

    Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

    Hi Matthew,

    If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

    1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
    2. If this does not help, reset the Bridge preferences and then try it.

    Steps: -.

    Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

    Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

    Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

    Let us know if it works.

    Kind regards

    Assani

  • Still having problems with my perpetual license Adobe CS6 after CC

    Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

    After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

    you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

    Open your problematic cs6 programs, and then click Help > activate.

  • Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

    «Problem with access point or wireless adapter»

    Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

    HI Maria,

    ·         What operating system is installed on your computer?

    ·         You have installed the latest drivers for wireless network card?

    Follow the suggestions below for a possible solution:

    Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: See these articles for solve wireless problems:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

     

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Let us know if that helps.

  • Problems with wireless connection in Windows

    I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
    OT: Network network adapter Ethernet NIC wireless networking device

    Hello

    Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  • Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

    Original title: I am trying to connect to my WiFi.

    I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

    Hello

    Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

    To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

    1 have you ever done any recent hardware or exchange of software on your computer before the show?

    2. What is the brand and model of the computer?

    Method 1:

    Follow the steps in the link below.

    Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Follow the steps in the link below.

    Using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 3:

    Follow the steps in the link below.

    How can I troubleshoot network card? :

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • Y410 77578CQ problem with wireless drivers

    I have three Lenovo 3000 series Y410 laptop computers 77578CQ. These are delivered with only vista drivers. But I installed Windows XP on them and now I am facing problem with Wireless Card Drivers for Windows XP. I downloaded both the drivers listed on the Lenovo site for the Windows XP wireless network card, but both do not work. Someone help me because it is really a matter of concern to my office as we only use wireless network.


  • Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

    My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

    original title: Wireless not working not

    Hello

    1 have had any changes made on the computer before the show?

    2. what operating system is installed on the computer?

    Method 1:

    Check the link and try to run the troubleshooter to check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

    When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

    When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

    We reinstalled OS

    We rested the router

    We are able to connect to Wi - Fi in other laptops, notebook and mobile

    We have updated all the drivers of network also.

    Please help me solve the problem.

    Hi Niranjan,

    Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

    Thank you

  • ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

    My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

    Hi Laylac,

    Thank you for your answer!

    I am pleased that the solution is an easy solution for you!

    Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

    Best regards!

    "Please click the Thumbs up icon below to thank me for having responded."

  • HP530: operating system reinstalled, still have problems with updates

    Reinstalled Vista32 OS, on the advice of tech, to 'cure' MS update problems. Use recovery discs. (Recovery partition could not be installed for unknown reason) After reinstall MS update still has problems. Any help would be appreciated.

    After the reinstallation, an update was successful, and then Update Agent failed to update. A number of updates failed (? 10?) and a number have succeeded. Then a small model, only 1.9 MB, Service Pack 1 installed, and then after that check Udates runs, it calls to reinstall Service Pack 1. Again and again and again.

    Thank you, volunteers.

    Hello:

    See if you install the SP1 and SP2 standalone files gets you going to...

    You must install SP1 before installing SP2.

    SP1:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

    SP2:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

  • Will there be new touch ID problems with iOS 7.1 measures?

    I have an iPhone with iOS installed 9.0.2 6. I was hesitant to go to iOS 9.1 because of problems with the Touch ID reported about 4 weeks ago. Thereafter, who had been an interim update (? iOS 9, 1.1), but I have seen no recent comments. Are there developments in this issue? I note tha iOS 9.2 beta 3 has been released; However, the overview of comments I've seen of the 'new' address for the iPhone elements, but says nothing about the contact ID. Any news?

    I used each publication IOS 9 so far. Never had a problem with TouchID. And I have not seen much on this forum about people with problems so, whatever it is, it probably wasn't terrible together.

  • Problem with wireless printing: can print test page, but not documents

    PhotoSmart Plus B210a with MacBook Pro running 10.7.4

    I can print a test page, but not a document.  The message from the print queue is "the printer is not connected.

    I started today be able to print from my computer, but not a second computer.

    I followed the advice of HP support including an update of the LION driver download.

    I deleted and added the printer on both computers.

    Now I can't print from my computer.

    Furthermore, why did I have to find in an HP forum on the new drivers.  Should not the printer HP offer update me the information?

    What is the download you have installed? : http://support.apple.com/kb/DL907

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • New and strange problem with Rhapsody to go on my Sansa Fuze

    Have a Fuze with 8GB micro SD 8 GB card inside and use for a long time without any problem with Rhapsody. Recently, I had not synchronized for a long time and got the message to play the tracks of my subscription, I need to sync with Rhapsody. So I don't tell me, no problem, and I do. The synchronization works very well and I get the message Rhapsody, it's reading the tracks on my Sansa and I get the message that it updates the internal memory on my Sansa. Then everything is finished and when I click on the internal or external memory, Rhapsody, I get the message that all is well and she sees all my Sansa great Flickr photos. I even put a couple of new albums of Rhapsody on the SD card in my Sansa. Once again, no problem.

    BUT when I disconnect the Sansa (again once, normal behavior with the green bar on the Sansa screen and the message it refreshes my media), he always says I have to synchronize to play the tracks on my subscription.

    Have tried resetting the sansa, tried the sansa when logged in to rhapsody, but nothing seems to solve this problem of license. How can I fix?   Thanks a lot for your help

    Ah, I leave you with the secret handshake to reset the secure clock.  Normally, this is done in this last step, when you transfer a track to the device.

    Open the client Rhapsody 4 and plug your rocket.

    Now for the tricky part.  Crack the knuckles and fingers ready.  Press and hold the [CTRL] + [SHIFT], then right-click on the "rocket" in the Sources pane.

    There you go.  Select Reset secure clock.

    See if the device is now happy.

    If all else fails, use the Format command on the "rocket", which will erase all media device, and then start over by allowing first and transfer some test tracks.

    My theory is that something is wrong with your secure clock...  Let me know how it goes!

    Bob

Maybe you are looking for

  • Pavilion p6361fr - fan runs loud

    Hello My client has a Pavilion p6361fr running under windows 7 Edition family, the office has not been used for a few weeks and has been electrically disconnected. When it has been used again, the cpu fan has worked very quickly with a noise hard CON

  • Dialog.Ask

    How to use it public static int ask(String message, Object[] choices, int defaultChoice) any psudo code

  • BlackBerry smartphones add Apps to your Favorites

    Greetings! I'm less than 24 hours - new for my BB!  How can I add Apps to my favorites 'screen '? Thank you!

  • Photoshop scanned the negatives n & B - too much light

    Negatives scanned old photos - they are pretty much correct in XnView but too lightly in Photoshop.The color space is set to sRGB, my monitor, XnViewMP and Photoshop. (Versatile Europe 3)I tried a few things and noticed that when you change the setti

  • Palette selective error

    Hi allI own PS CS5. For some time it has been to come up with the following error at the end."Errorpalette selective." "XML parsing error: 'not well formed (invalid token)' at line 1"Is there a way to return to normal program?see you soonNick