Printer HP CP1215 Color Laserjet will reverse only upward when both sides feel

Similar Questions

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• Printer Laser HP Color LaserJet 3700 will not properly install in Windows 7 32 bit.

  According to the Windows 7 compatibility list the HP Color Laserjet 3700 Laser printer work on Windows 7 using the drivers provided by HP. However, when Windows 7 auto detects the printer and installs it, the device is installed under unspecified devices. If I go into the properties and try to manually install the drivers that Windows tells me that the latest drivers are already installed. I also tried to manually install the printer port LPT1, USB virtual port, with the HP USB port that was created by pilots using universal HP drivers and Vista drivers and none worked.

  Thanks for any help.

  Hello

  have you tried that?

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?cc=us&lang=en&ObjectID=c00751649&prodSeriesId=315849&prodTypeId=18972

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• Color LaserJet MFP Pro200: Only a picture scratched when copying or scanning

  Whenever I'm doing a scan or trying to copy a page, all I get is a page with thin stripes, up and down. I did a last, I tried to make a copy in color. I have a page of stripes coloured accordingly. Others I made black so the stripes are only black and white. It does if I do a scan or try to make a copy of something. I did scans with success until last week. Do not know what is happening. Thanks for any help.

  Hello @awestruck,

  I understand that you are experiencing quality problems when scanning or copying on your HP LaserJet Pro 200 M276nw MFP color. I would like to help you today to solve this issue of quality. If the question scratched image produced through both the dish and the ADF on your computer, then your printer is probably affected by a power or programming problem. If the striped image problem occurs through the dish or the ADF, but not both, then there is likely debris sweep across which is at the origin of the defect. Can I please you follow the steps below to resolve this issue.

  • Problem 1: Striped Image occurs in the dumpster and automatic document feeder:

  Step 1: Check of power:

  Please ensure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause HP printers lack power and will not work properly. Once your printer is plugged directly into a wall outlet, please run a test copy to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: update Firmware:

  There may be one occurring problem of programming of the internal Firmware in your printer. The Firmware is the internal "brain" of your printer. It determines what the printer is and how the printer it. If there is a corruption in your printers programming it can cause problems with your machine performance. Can I have it please click here to download the latest Version of the Firmware. Once the Firmware has been downloaded, please follow the instructions on the screen to 'send' the latest Firmware for your printer. Once the Firmware has been updated successfully please test scan and copy functions to see if the problem has been resolved.

  • Question 2: Striped problem occurs of the bucket or the ADF, but not both:

  Step 1: Clean the machine and check the settings:

  Please click here to access the appropriate support material. Once the document opens, please run through the procedure to search for tasks or debris on the glass flat or the mechanism of the automatic document feeder. Once the troubleshooting is complete please try to copy and scan to see if the problem is resolved.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if the lines problem since charger document both flat. I look forward to hear from you!

• Printer will be only woek when I disconnect from the Internet

  Original title: I have a HP Deskjet 3050 a J611 printer all-in-one. Wireless also. I had plugged in my computer on another wireless service, but since I changed it does not connect to the online services service

  I have a HP Deskjet 3050 a J611 printer all-in-one. I had plugged in my computer that was on an internet service. I changed my service and now the printer

  join the network only when I unplug the printer from the internet and click on connect to the printer?

  E-mail address is removed from the privacy *.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Sound like a hardware issue-setting up the printer using the HP installation methods.

  HP - DeskJet 3050 a - Product Support and troubleshooting<- set="" to="" your="">
  http://WWW8.HP.com/us/en/support-drivers.html

  HP - DeskJet 3050 a - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5061082&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers<- search="" driver="" for="" your="" model="" and="" then="" put="" in="" windows="">
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ======================================================

  The main issue is probably hardware or drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer HP 1025NW color laserjet - damage of paper jam

  Two pieces of plastic fell out of door back when it was opened to remove a paper jam.

  Does anyone have a photo from the maintenance manual indicating where these parts must be installed?

  Now, the back door opens when the printer is running.  I guess they have to do with the back door closed locking or adjustment of the spring pressure on the black roller at rear.

  One piece is black and the other is white.

  Thank you

  

  

  I looked in the user manual and illustrations only and reference is made to the access door back on page 116 jam that addresses by removing a paper from the printer. Since it is a hardware issue, I would call into HP Total Care. The USA and Canada customer number is 800-474-6836. Other clients can find the contact information here. I hope this helps.

• Multifunction Color LaserJet Pro 200: blue line when scanning from feeder not dish

  When I scan from the charger, I get a blue line that spans the length of the document. It does not happen when I scan from the tray. any suggestions on how to fix?

  Thank you

  Hi @Pichopop,

  Welcome to the Forums of HP Support! I read your post and see that you have found a blue line, during the analysis from the ADF. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are several models of Laserjet 200 series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. Poor power connections can cause problems of copy and scanning and rejection of the toner.

  Here is a document for the cleaning of the glass and Platinum. You will notice that there are two areas for the glass, one for the dish and the other is for the ADF.

  • Copies, faxes, or Scans have Vertical black and white lines to the exit.

  Do not take into account the model and the title. Proceed to step three: clean the glass and Platinum sweeping.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex