Printer HP deskjet 6940 with Windows 7 problem

I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

Hello

You will have to install the software of the printer that is compatible with Windows 7.

Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

Let me know how you go.

Good luck and enjoy Windows 7
Jon

If this message was useful and allowed, please consider the vote and it offers as a response...

My Blog - www.insidetheregistry.com

Tags: Windows

Similar Questions

  • HP Photosmart D110 printer will not install with Windows Vista?

    HP Photosmart D110 printer will not install with Windows Vista?

    Hello

    (1) what happens when you try to install the printer?

    (2) you get an error message?

    Method 1: You can run the fixit available in the link below and check to see if that makes a difference

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    You might want to know

    Add or remove a printer

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Printer hp deskjet 1220C to windows XP SP3 drivers

    Printer hp deskjet 1220C to windows XP SP3 drivers, exist?

    Drivers rarely are service specific pack, just go to the HP website and download the latest Windows XP drivers for your printer.

    John

  • All-in-one 968 printer won't work with Windows 8

    I got the XPS 8500 last week.  After hours of trying to figure out the new operating system, I tried to connect my AO 968.  Nothing prints.  I tried to implement everything.  The printer appear in devices and printers, and he says it's working properly.  My eye!  When a driver will be ready for it?

    Hi Lynnt2,

    The 968 AIO printer is not compatible with windows OS 8.

    Please click here to check the compatibility of printers. http://Dell.to/UMzvYJ

  • Can I use the same printer to print from a pc with windows 10 and a pc with windows 7

    * O.t. - printer using windows 7 and 10

    Can I use the same printer to print from a pc with windows 10 and a pc with windows 7?

    Yes, assuming that there is the compatible drivers for both versions of the OS.

  • Canon S820Printer my printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full.

    My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print.  Ink tanks are full.  What bad past and how to fix it?

    If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783

    If all goes well.
  • I used Print artist 4.02 with Windows 98 but does not work in Windows 7

    I have a copy of the Platinum 4.02 artist Print.  It worked with windows 98.  Now, I have Window 7 Home Premium and get an error when I try to download the program.  What can I do to make this program loaded on my system? P

    Artist is up to version 24...

    Nothing below Print artist 22 is NOT compatibible with Windows 7.

    You need to upgrade to the latest version...

    http://www.PRINTARTIST.com/

  • The printer does not work with windows 7

    Just bought a Samsung R480 today and discovered that my existing printer is not compatible with it. The Setup disk only works with Windows XP and Vista. Samsung R480 running Windows 7 at the moment.  I was also considering changing my desktop computer for Windows 7 as well.

    So my question is, is it possible to request an another HP installation cd that is compatible with Windows 7? Or I have to buy a new printer that is compatible with Windows 7?

    Thank you!

    The link below should show the selection of OS for the drivers of J4680c. just click on what version of Windows 7 you have (32-bit or 64-bit), then download it the driver full of features.

    Pilot J4680C

  • Printer/Scanner with Windows 7 problems

    I recently bought a new computer with Windows 7.  I have a HP Deskjet 5650 printer and Windows 7 does not detect.  I have a HP Scanjet 5370C scanner.  Windows 7 detects it, but tells me that there is no driver for it.  I searched for driver downloads, but apparently it is not a driver for the printer or scanner.  Can someone tell me how to solve problems - other than buying a new printer and scanner?

    Re the 5650...

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01874725&LC=en&DLC=en&cc=us&product=304445

    Re the 5370C...

    There is no driver support HP, but Vuescan supports... There is a trial version...

    http://www.Hamrick.com/

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • HP deskjet d5560: problem installations hp deskjet D5560 with windows 7

    Hello all I have this problem, you can install the printer driver with the cd D5560 hp with windows 7 I have a hp prodesk pc g3 400 mt

    Greetings @massimo67,

    Thank you access the Forums from HP Support for extra support! I see you are having problems installing the printer. I'd love to help you.

    Thanks for the screenshot, but I can't read it. Please translate some of them.

    You can try this document to see if it will help: "Device installation failed" or "Unknown device" message during Installation USB (Windows).

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • The deskjet 6980 printer model is compatible with Windows 7 Professional 32-bit update?

    I think the upgrade to Windows 7 Professional, 32-bit. I have a printer HP deskjet, model # 6980. This printer is compatible with Windows 7 Professional, upgrade? I also have a HP scanjet 2400, is compatible too?

    Hi harypick46,

    Yes, the drivers are already included in Windows 7 32 - Bit for the 6980. In regards to the scanjet I'm not find information about the drivers for that old of a scanjet.

    http://support.HP.com/us-en/document/c01943577

    http://support.HP.com/us-en/document/c01874725

  • Arrive not portable to print to Deskjet D2460 under Windows 7 (Vista upgrade)

    I have an Advent laptop and am trying to print on a Deskjet D2460.  I have recently updated from Vista to Windows 7. Under Vista, I could print without any problems. However, everything that happens now is that the printer ejects a blank sheet of paper.

    I have a PC with Windows 7 installed OEM - it also allows to print to the same printer without any problems.

    I tried to use the same print drivers on both machines. I tried to allow Windows 7 to determine which driver to install on the laptop. I installed the extra HP patch (dot4patch.reboot.exe). All this without success.

    I ran the HP Print Diagnostic Utility. That said, there's a conflict pilot. He me says uninstall, reboot and then let Windows 7 install the driver. What I've done. It still not print. I re - run the utility and got exactly the same diagnosis!

    Does anyone have any suggestions?

    In case anyone is interested...  I've been advised by Microsoft to re - install Windows 7 using a clean installation. I've done this and can now print. (I also had another problem - (I couldn't disable the Touchpad) - which is also resolved.)

  • HP Deskjet 3070 with windows 8

    Could someone please help me find the drivers for HP Deskjet 3070 for windows 8?  The CD that came with the printer doesn't support windows 8.

    Thank you

    No problem at all, I'll be happy to help you find the drivers for the printer Deskjet 3070.

    Here is a link that will help you with the drivers.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109010-2&cc=us&DLC=en&LC=en&OS=4132&product=5068754&sw_lang=

  • Printer does not work with Windows Vista

    My HP Deskjet2540 all in one printer will print with windows vista. Ive tried printing from excel, works and all I get is a blank sheet. Sometimes I get some very weak marks. I have a lot of ink, I uninstalled and reinstalled only to get the same result. However, I can print something on the internet and I can print a test page. I get no error message.

    Hi cat22,

    Thank you for visiting the Forums from the HP Support! I see when you print from Excel to your HP Deskjet 2540 printing comes empty or with very weak lines. You have a lot of ink, and you have no problem printing from other programs. You tried to uninstall and reinstall the software without success.

    I would like to first you attempt to change the quality setting, you can have currently set to normal, we will try to print in optimized mode and see if that helps:

    1. go to your Start Menu

    2. go to your devices and printers

    3. right click on your DJ 2540 and navigate to Printing Preferences

    4. click on the paper/quality tab

    5. Select the best mode

    6. click on apply

    Now try printing from Excel, you still get blank pages? Please let me know the results if you are still running into errors let me the following information:

    1. What is your current operating system, Windows or Mac and what version?

    2. What is the connected USB printer or wireless?

    3. are there any exceptional computer upgrades that have not been installed?

    I hope hear from you soon.

  • HP Deskjet 5550 with Windows XP Mode

    Hello

    It drives me crazy. I have an old HP Deskjet 5550 printer which I used to use on my Windows XP Dell laptop. I just bought a Dell Inspiron 17 with Windows 7 Professional. I installed Windows XP Mode as well.

    I try to install my old HP Deskjet 5550 in my new computer laptop. Just after I installed the software, it worked on Windows 7 and XP Mode. Once I reboot, it no longer works. I worked on this problem for several days now and this morning I tried again and all of a sudden, the printer worked on the side Windows 7 without any problem. But when I tried to use it on Windows XP Mode, it did not work.

    I called Dell Support and they have taken control of my laptop and worked on the problem, but could not understand how to operate on Windows XP Mode either. They asked me to call HP and I did, they could not solve the problem either.

    I've looked everywhere and almost all users have the problem using an old printer HP Windows 7 and not Windows XP Mode. But for me, it's the opposite. It is very strange for me.

    Anyone know how to fix this? I have the CD that came with the HP printer and have tried to install and uninstall the software, the problem persists.

    Suggestions or comments are much appreciated.

    Thank you.

    Ok. I don't know what is happening. I changed the port numbers as I posted and I changed to a port called TS001 PRN8 and I tried to print something and it WORKED!

    But I tried this port before and it didn't work. I restarted my XP Mode and test the printer again, and it still works. I am therefore very well so far.

    If the problem comes back, I'll post it again here.

    Thank you.

Maybe you are looking for

  • SD 2 GB card shows only 1 GB after formatting

    I have formatted the card 2 GB flash memory using this utility. After this card took a strange file system, so I foramtted the map using the windows utility and map is displayed as a 1 GB flash card. How can I foramt this card than 2 GB?

  • driver DVD update and there but does not work

    My HP laptop DVD player does not work properly. When I try to update the driver, it does state that it is updated and currently, but it will not allow the DVD player function. When I check the peripheral material, it gives an error CODE 19.  It says

  • Update FAIL! Windows Server 2008

    Hi all for some unknown reason, I am unable to install "Windows6. 0-KB2117917-french-x 64.msu. I get the same error: 0 x 80070020 normally, I don't like, but since I tried to install this update I lost the ability to view/edit my server with this err

  • How to upgrade to windows 8.1?

    I have windows 8, but not preinstalled. and now, I want to upgrade to 8.1 windows, but if I open the store, updates windows 8.1 is not available. I have installed all updates, and the store said, "Sorry, TTHE day is not available for your PC" or what

  • LR 6 re - install download location - EDIT: ignore, did a search now...

    Hi - I have the perpetual license of several LR6 platform. I need to re - install. Where can I download the installation file of.Thank you.EDIT: Ignore: do a search now.