printer hp deskjet advantage 5: Hp black ink 670

Similar Questions

• DeskJet 3522 does no black ink print

  I got a new DeskJet 3522 for just a few months, when I tried to print a PDF file yesterday, black ink started to print very, very faintly, and then completely disappeared.  I guess I was out of ink, so I bought a new HP black cartridge.  When changing the cartridge, the ink level showed a black ink left, but in any case, I changed the cartridge.  The new cartridge does not print also.  He still has a lot of ink in the color cartridges and it shows a totally black cartridge.  Displays the level of the cartridge are generally accurate?  Have I not a new cartridge defective?  What is the problem?  Thank you.

  Hi, such that the printer is still under warranty I would definitely say contact you HP support by phone you may need a replacement printer. Can you please let me know how you go?

  Thanks, Ciara

  Do not print in black

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/black-not-printing/m-p/2926025

  The contact numbers

  http://welcome.HP.com/country/us/en/wwcontact_us.html

• DeskJet 1050 J410 no black ink will print.

  Recently, I changed my black ink cartridge and now the black ink does not print. It shows that the cartridge is full, and it's a brand new cartridge to the store. When I print, the book will come out with only one color of ink. I tried to clean the heads printing, but in vain. Can someone please?

  Try to reset the printer and check if that solved the problem.

  1. turn on the printer and open the cartridge access door.
  2. remove the black and color cartridges from the printer and close the door.
  3. disconnect the power cord to the back of the printer.
  4. wait for 30 seconds and connect the power cable to the printer.
  5. If the printer does not automatically, press the power button to turn it on.
  6. install the cartridges.

  Now, try to print and check for the problem is solved.

• DeskJet 3520: new splash black ink cartridge ink

  I just replaced my 564 to 564XL black ink cartridge. I received a message that the cartridge has been installed correctly. but when I tried to print I got a blank page. When I looked inside the printer, I saw that inner right before the printer is filled with fresh touches of black ink.

  I went on troubleshooting hp including cleaning printer head site and it did not help.

  Hey @idogold,

  Welcome to the Forums of HP Support!
  
  I understand that since the installation of a new black cartridge for your HP Deskjet 3520 e-all-in-one printer prints blank pages and you may have noticed some residue ink inside your machine. I would like to help you today to this question.

  Now, residue of ink inside right of your machine is completely normal behavior. For more information on why this product please click here.

  However, I'm concerned by the printing of blank pages. To begin troubleshooting can I please have you click here. When the support document opens can I please have cross you Solution three and four. This includes all sub-steps under two listed Solutions.

  Please reply to this message with the result of your troubleshooting. Good luck!

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• paper HP deskjet f2480 & fires of black ink. Has passed through the stages. new cartridge. Continues to blink.

  I have a printer hp deskjet 2480 all in one. The paper and ink lights flash. I went through the trouble shooter and replace the cartridge. Continues to blink. All the answers as to why and what next? Error code 095E76ZB.

  Thank you all for you answering my question on my printer HP Deskjet f2480 problem. Sorry for the late update, but I take care of an elderly parent and have been busy with appointments.

  The problem of the printer turns out be a problem of cartridge after all. We took it to a repair shop. The person told us that this printer is particular about the cartridges. He plays well with non HP cartridges or refills. We had been filling at Costco with no problems for a while. Costco has verified the refill cartridge and it checked OK. Go figure. After trying a few new HP cartridges, we finally got one to work.

• Problem printing HP Photosmart series 4100 with black ink cartridge

  Although the two black ink cartridges indicate that they r at least 1/2 they full r impression as if they were empty. Pale color impossible to read. What is the problem?

  Hi Bialy,

  I found the troubleshooting guide for the issue of fading print.

  Please try and let us know the status.

• Printer HP 8100 retains the setting "black ink".

  Hello

  When I 1st I set up my printer - it made for "black ink" only (since 95% of my work is black ink).  A month ago I had need of a color printing - so I changed the color.  I have tried to go back to "black ink" only "millions" of times since then - he 'held' to a print job - but then "rebounds" right of return to color again for the next print job.  Yes, I selected 'apply' when I change to black ink - and there is also a selection (toggle) black ink.  I changed that to activate.  Even then, when I look at the next time - the "black ink" selection disappeared and the (toggled) said disable.

  How to make my default printer black ink?

  Thank you

  Hi kwyet1,

  Thanks for the reply and apologies, I don't know why this does not work for you.

  You can download and run this Installer printer HP and it will download the software and install it for you. I hope that it cooperates with you a little better.

  Let me know how it goes!

• C410a printer and all of a sudden black ink stopped printing?

  I never received a warning indicating that the black ink cartridge ran low. all of a sudden I tried to print and nothing came out on paper. not even a shade of ink. So I replaced the black cartridge and it STILL will not print. I've tried everything. cleaning and everything. What is wrong with him? GGRRR

  Never mind. I finally got it to work. I continued to do a cleanup on it... again and again and again... and printing a test page. Finally, it started printing. I think it was clogged somewhere.

• DeskJet 2540: Failure of black ink

  I only use my Deskjet occasionally, when I tried to use it yesterday there is no black. Cannot be out of ink have only printed

  about 20 pages

  Success! I tried suggestions

  1 wipe the area of the jet black cartridge with a damp cloth. Only partially successful.

  2. turn the cartridge flat the bottom of warm water (1/2 ") down, for 15 minutes. Get out and dry. Who worked, printed on several pages of the music with satisfactory quality.

• Printer HP 6012 uses too much black ink

  I don't get many copies of my true black HP 61.  Is it possible to print in draft or in lighter copies?  Why not get as many copies as advertised on the box?  Help, please.  I [(suis juste un pauvre prédicateur... il suffit de demander ma congrégation)]

  Hi georgedurham,

  Thank you for your response. I see that you are running a Windows computer and I found a website to guide you on how to change your printing preferences. This is where you will be able to change the "quality" of your impressions (see the Advanced section), in this case, you can select 'project' that can be advantageous.

  This is the link of website which will help you to get to where you need to check the preferences.

  Printing options

  I'll also post an example image that may look like the window:

  

  I hope this helps you.

  Take care

• "Black ink cartridge is not compatible with this printer" message - 56 HP deskjet 5552

  I just replaced my HP 56 cartridge in my old printer HP Deskjet 5552 - I use an iMac & when I try to print, I get the message error "black ink cartridge is not compatible with this printer.

  It makes no sense that I replaced the cartridge many times before without ever having a problem.

  I have already returned a cartridge to the store where it was a problem with the cartridge itself, but the same thing happened with a second.

  Any suggestions gratefully received.

  Thanx, Alison

  Hello

  It usually take a few cleanings to operate.

  Best regards

  ERICO

• All-in-one Deskjet 3632: Deskjet 3632 black ink not working not

  Hello

  I bought a HP all-in-one Deskjet 3632 and have set up on my laptop and phone. I scan a document was nice and feel it was ok, but the documents will not print using black ink. The first impression is rather a gray, and it seems that the color ink is the only one used. When you print word documents, none of the black ink is printing and only a small amount printed on the first page of test, where none of the letters are readable at all. The cartridges are new and in the same area as the printer. I did the fixes suggested without result, bar to buy a new cartridge which I hesitate to do what the budget is tight. Is there a fix that can be made, or will I have to resort to buying a new cartridge?

  Greetings @JamesMontgomery,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing in black. I will do my best to help you with this problem.

  I wasn't sure of what you have already tried. I would say the contacts of the cartridge cleaning manually, if you have not already: ink cartridge errors. Do not take into account the title.

  If you still have questions, please contact HP support: phone help worldwide.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP Deskjet 3522: Black ink not working not

  My ink level is full but when I print, nothing in black prints. I bought a new black ink, and it still says that the ink is full but it won't prink anything. Can someone help with this problem?

  Thank you!

  Try here.

  http://support.HP.com/us-en/product/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5231945/document/c03955488/

  Let us know.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.