Printer HP F370 sleeps just for printing a page

I would like to ask why my printer just sleeps for printing a page. I mean after the issuance of a print command to a page to print and print a page, for example it prints half page and sleeps there and after 30-40 sec it prints just another line and then stuck out there for even a few seconds. I don't understand the problem. What is with the software or the printer hardware?

I have HP Deskjet F370 all-in-one, Windows 7 Ultimate 64-bit.

There is no error message by windows. No changes are made to the computer. Modifications to windows as well.

There may be a problem with the USB cable or port.  Try switching to another USB port on the computer and using another USB cord.  Make sure the USB cable is only 6 feet (2 meters) long or shorter.  Anything longer that can result in a loss of signal.

Tags: HP Printers

Similar Questions

  • What printer driver for Windows 2000 with work with a 8600? Just for printing.

    I need a printer driver for Windows 2000 that are compatible with a plus of 8600. Just for printing and not other features. In the past, I used a driver for a 550 c to print to a 8500 has more but it does not work well with the 8600.

    Thanks, 6940 driver seems to work.

  • HP LaserJet P1102w worked very well and now just print 1st page of multi-page documents

    Hi, I used my printer for more than 6 months.

    Last month, has had the problem for a couple of days, then he went suddenly (yahoo, I thought).

    Has started again last night when printing pdf documents, it only prints the first page and then it seems stuck on page 2 (52% complete transfer appears on the windows printer).  For word, it seems to just take forever to print other pages...

    Running on a Mac OX X Yosemite.  Printer is connected with a wire (I was never able to complete the wireless connection and got too busy to spend more time understanding...).

    Tried to turn off my computer and then restarting him.  Also stop the printer and restarted.

    Thanks in advance,

    M

    Hi @MartineRB ,

    I see you are having problems printing multi-page documents. I would like to help.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

    Try to print again.

    If you are able to print now by the USB connection and want to set up the printer on the wireless network, take a look at the following:

    Restore the default settings of the printer.

    Turn the printer off, press and hold the wireless button and the Cancel (x button) button while turning the printer on and do not release both buttons until the printer stops making the noise.

    Print a configuration report and check the SSID address and IP are disabled.
    Printing a Configuration Page. Select the method two.

    Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open if it is not.

    Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

    Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

    LaserJet P1102w.

    You can follow the steps instead of the video.

    You must connect the USB cable from the printer to the computer to install the printer as a USB device first and then to configure the wireless network.

    Turn on the printer, connect the USB cable and install the update from Apple that should load automatically.

    Then go to the Apple, system preferences, printers and Scanners.

    Highlight the Laserjet on the left side of the window.

    Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

    The integrated for the printer Web server opens.

    Click on the network tab, select Wireless on the left side.

    Fill in the information for your network. Status make sure that you select enabled.

    Apply the settings.

    Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear) Make sure that the printer is listed beside the use: displays the name of the correct printer and not the driver by default, and then click the Add button.

    Remove the USB printer in the list of printers and Scanners window.

    Unplug the USB cable.

    Test the printer.

    If you need help, let me know.

    Good day!
    Thank you.

  • I use a PDF file extensively on my computer and assumes that the PDF is more native to Evernote, it apparently really is. I just installed Adobe Acrobat DC and its Virtual PDF printer. But, when I went to print multi-page documents, the printer would be o

    I realize that it is a forum for Adobe, but I imagine there are many people here who use PDFs on Evernote. Unless there is something I don't really understand, it seems that you can copy a PDF of several page on Evernote, but you can retrieve only the first page on a virtual printer Adobe for Windows. Can anyone suggest something I should do?

    I have a neurological disease and an accumulation of documents on Evernote. Most of the documents have been given to me by a doctor, I have them scanned in PDF files and read these files in Evernote. I just assumed that when it came time to take the documents to a new doctor, I could print them. But, when I went to print multi-page documents, the printer would only print the first page and ignore the rest.

    Sounds like you have a problem with EverNote, not Acrobat. Acrobat prints being told to print, it does not stop after the first page.

  • How to get a LONG email to print all pages, not just page 1

    For a long email (that SHOULD print 2 + pages)
    and when you go to the preview window before printing... ONLY page 1 of shows and only prints 1 page.

    Method of making changes to Cent to a font that is SOMETIMES illegible will put the whole email on this PAGE ONE
    But, this is unacceptable.

    Also, I can REMOVE that information on the left, so it does NOT print (I. E the Outlook bar with "inbox" / "Sent" "drafts" etc., and ALL file names.)

    Also... are people receive our emails,... to see THESE 'FILES' on the left?

    On Outlook.com/Live.com, you must use the print on the... menu item in order to get a page that allows to print correctly.

  • How to print 1 page for each line of the numbers worksheet

    Hello... I am trying to print reports of year-end per person and number.

    Is it possible in number to print 1 page for each row of a spreadsheet of numbers?

    Or suggestions?

    Thank you.

    Hi cm,

    This looks like a work of fusion and mailing.

    The merge document would create in Pages, and the cells of merger on this document référenceriez cells in the table in the document numbers.

    See the documentation Pages (on the Help menu) for instructions on the conduct of merger and mailing.

    To do this in only numbers, you would need to put in place a 'table of declaration' on a separate sheet (in the same document as the table containing information) which would accept a customer number (or other key ID for each individual) then use it to determine the line of the main table to retrieve information about this pattern.

    A more precise answer requires a more specific desription of your table structure and the desired form of the instruction to take.

    Kind regards

    Barry

  • HP M602: M602 takes a long time for the first page of the printer

    I have a M602 when you send a print job, it takes 2 t o 3 minutes for the first page to print.  The following pages and then slowly but surely print.  The next print job then begins the same cycle.

    We had one where I work where it is one of the complaints and a firmware update seems to make a difference.

    Firmware update also tackle the problems of security and they are free.

    Firmware upgrade is found in the software section and drivers from the support page for your printer on hp.com.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

  • What is the USE for a TEST PAGE/printer status REPORT

    Did you read post or forums and a tech wants to see you if you can print a test page or the printer status report?

    It is a test to make sure that a function of the printer works properly. Sometimes you can't print from your printer and everything is blocked and you think it's the printer. If you can print this test page, then most likely it will be a software problem or a connection problem.

    The information contained in a test page can diagnose a problem with the printer or to consider including information about the printer. Test pages can be printed using the print or the computer control panel.

    The page test print function prints a page with several print cartridge models and a numbered list, containing specific information about the printer.

    I hope that is useful to the community.

    Thanks for reading.

  • Printer Test page: Top a thumb print black, fading to printing for the orange rest

    Original title: Printer Test Page

    Top of page one prints black, fading orange print for the rest. Print content is readable and accurate.

    Rohit Nagpal: thank you.

    The printer is HP Deskjet 2050 J501.

    I changed from 81/2 X 11 to 4 x 6 photos - the first digital photo (B & W) was normal (all black). The second printing has been described, first black inches, then orange rest. I adjusted the printer to 81/2 x 11, the first impression has been described. I asked for assistance.

    I read your message and proceeded to print a test B & W 8 x 11 page. It was OK! The second test page is OK too.

    I don't know what I did to solve the problem, except that the computer was shut down for two days. Thank you again for your help.           George Hutson

    Third page OK! I'm going to print your first page, I have to these references.

  • "This document may not be printed, no pages have been selected for print".

    When I go to print, Adobe Reader said "this document may not be printed, no pages have been selected for print". Has anyone experience this problem? And if so, how you go about fixing it?

    Hi cindeer74034810,

    Try the following: open Adobe Reader go to edit-> Preferences menu

    • under Documents, change "Show the documents in PDF/A mode" Never
    • under the (enhanced) protection, clear protected at Startup Mode

    Let me know if the problem persists.

    Kind regards

    Nicos

  • How to change the printing order page for a 8600 more on an iMac

    How can I change the order in which the pages printed on and the iMac?  Print the pages in reverse order (last page 1) and I need some do print in regular order (page 1).  Could not find a way to do that, am very frustrated!  Any help and advice would be greatly appreciated.  I am owner of an all in one printer HP Officejet Pro 8600 Plus.

    I'm sorry you have a problem with the print commands.

    There should be an option when you click on print. Another window will appear until you press on print again.

    It should be a box that gives you the order of the pages (1,2,3---3,2,1). Juice change the order.

    If only you do not have this box, you can always try uninstalling and reinstalling the software and drivers.

    '"Click the WHITE STAR if you want to say thank YOU" '

    Let me know if it helps.

  • How we can print the page numbers for the shape of the TABLE OF CONTENTS when her excluded from the form page count?

    Hi Experts,

    We have the TABLE OF CONTENTS, followed by 100 forms totally 215 pages.

    We checked in the exclusion of the option of number of form page SUMMARY form at the level of the group.

    Followed forms of TABLE OF CONTENTS forms all use FORMSETPAGENUM rule at the bottom of page.

    the first form followed by TABLE OF CONTENTS form the number starts page 1 of 215 and the last form closes at 215 215.

    Now, I want to print the Page number of SUMMARY form only.

    How can do us?  Any thoughts?

    Kind regards

    RAMAN C

    Hello Raman,

    I guess that you included "Exclude the number of pages" option in the form of table of content (TOC).

    There is a limitation in the studio. The functions of page number (PAGE NUM OF FORM / FORMSET PAGE OF NUM) will be ineffective when we choose the option "Exclude the number of pages" in the form of table of contents. Therefore, you was not able to print many pages of form as a table of contents.

    The only way to print the number of pages is to deselect the option "exclude the number of pages. Then you can print the number of pages in the table of contents in the form of table of contents normally. However, this number of pages in the table of contents will add to the Total number of pages form set. The number of pages all forms can be controlled by Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]

    Kind regards

    Mahesh

  • PSC 1510 guard printing alignment pages, won't allow me to use scanner

    My 1510 keeps printing alignment pages (or gives me an error of paper output).  I do not use the color cartridge and haven't for a long time.

    Now when I try to scan a document it says that something is in control of the scanner (probably the alignment process).   I put the fininsh the alignment process page, but he just keeps trying to print an alignment page.

    How can I disable alignment 'characteristic '?  I'm starting to think that the only purpose of this feature is wasting ink HP.

    Hello

    The alignment process designed to ensure optimal print quality, black ink and color are necessary to complete the alignment process, otherwise it runs aground.

    I'm afraid that the model does not circumvent the alignment process, thus getting a new color cartridge essencial in order to complete the alignment process, otherwise the printer will keep pritnign the sheet at the start of the device.

    You can try to print an alignment sheet and press several times the button cancel during the pritning of the page, I think that it can cancel the process then and allow you to scan, however the same will have to be repeated after the printer is restarted.

    Shlomi

  • Safari not responding when I try to print a page

    How can I fix this safari unresponsive when I try to print a page?

    This isn't an answer. I seem to have the same problem with Word for Mac 2011. I downloaded an update to El Capitan just before all that is going on has begun.

  • Windows8 - how to print a page of a website?

    I have a HP envy 17 notebook pc, windows 8.  How to print a page of Web sites, such as Amazon.com?  Tried Ctrl + P, but there is no option for printing a page.

    Hi zenshemag,

    I understand that you have a problem printing just one page of Web sites. I will do my best to help you solve this problem. I suggest using the HP update and update the laptop.  What web browser do you use? Try using Internet Explorer. You should be able to right click, choose print and the print properties page should appear. Before you choose printing look at the page preview before printing, it will tell you how many pages is selected for print and what are these pages.

    Let me know if this helped, or if you need assistance.

    Thank you

Maybe you are looking for

  • Why my browser keep crashing?

    For days now my firefox browser crashes constantly, at intervals of 1 to 20 minutes. I've updated everything (windows, firefox etc.) checked plug-ins, etc. scan viruses, but it always crashes repeatedly. Any ideas? I get to the point where I have to

  • Problems with map graphics on my Satellite A60-672

    I have a Satellite A60-672 which graphics by ATI. Repeatedly at startup until it broke down and the system crash online said whenever it is ATI technologies. I sent ATI and they said that there is nothing to do with them. I tried Toshiba, but none of

  • Internet does not work after changing graphics card.

    Hello I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case. after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetoot

  • Sansa Fuze has a white screen! Help!

    Hi, I listened to a song on my rocket and sudenly the screen began to move through, and then he got the color bars on it, computing disappeared until it was just a white screen, but curiously enough, the music continued to play? In fact, each button

  • Windows media player import disc does not

    I have windows vista and I want to play DVDs with Windows Media Player.  Everytime I put a DVD in I get error importing disk stopped working.  Do you have troubleshooting for me? Suzie