Printer HP j6450 all-in-one

I NEEDED TO CHANGE MY INK AND CARTRIDGES AT THE OPENING OF THE UNIT TO REMOVE THE ENTIRE TOP OF THE PRINTER WAS RELEASED. DON'T KNOW WHY, NUMEROUR TIMES HAVE CHANGED. THIS ROOM CAN BE PUT BACK OR NOT? IF SO, HOW.

Thank you

Unfortunately, if the upper part of the printer has dropped the base you would look to the replacement of the product. If out of warranty, you might want to investigate the HP upgrade program. This is where we can call HP Total Care and inquire about buying a printer refurbished at a reduced price that comes with a full factory warranty. These printers are also eligible for extended warranties. The United States and the Canada customers can call 1-800-474-6836. Other clients can find the contact information here. I hope this helps.

Tags: HP Printers

Similar Questions

  • OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not

    I have an Officejet J6450 All in One Printer.  I only use the new HP cartridges (not renovated, manual not refilling).  I installed a 74XL into the printer about a month with expiration of 02/11/2014.  It is still more than 1/2 full and very well printed yesterday.  Today, without apparent reason, the printer is saying that the ink cartridge is not supported by my printer... it is evil.  I tried a reset (3 and the # and when it does not 6 and the #) unplug him and by plugging it in.  I also removed the cartridge and tried both resets and then put it back in and still got the same error message.    I cleaned the print heads with a coffee filter and distilled water and tried the reset with unplugging and plugging back.  That didn't fix it.  Also, I deleted all of the permits from the hard drive and reinstalled the drivers and all updates (which I am automatically in any case, if the printer was already updated yesterday).  That didn't fix it.  I have tried everything and can't get this stupid to work printer.  I spent hours and hours on this.  I put in a new cartridge and it seems to work now, but I don't want to lose more than 1/2 full cartridge with no recourse.  I am a mother of 6 and the ink is very, very expensive, and what happens if this happens again?  Someone at - it ideas?  Any help would be appreciated.

    Sounds like the cartridge has failed, because its guarantee until 2014 I would contact HP telephone support. Can you please let us know how you get on?
    Thank you
    Ciara

  • The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

    The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

    Hello

    Please visit the following link:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

    Kind regards.

  • The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function?

    The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function? If not, all printers HP still have this feature?

    Hello

    Please try the following alternative:

    http://www.PDFCore.com/p01_advancedpdfutilitiesfree/feature_09.html

    Kind regards.

  • Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

    Original title: Dell Printer 966 all in one

    Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

    Sam Soliman
    E-mail address is removed from the privacy *.

    You shouldn't if you get it from Dell.

  • How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

    How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

    Jim go to settings on the 8600, click Preferences.

    There is an option DATE and HOUR.

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • 1315 all in one printer: my 1315 all in one printer shows "paper jam".

    My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

    Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

  • Wirth problem Scanner printer HP Photosmart all-in-one.

    How can I activate the scanner on my HP photosmart all-in - one printer?

    How can I activate the scanner on my Photosmart all-in-one printer?

  • Unable to install printer Deskjet F4280 all-in-one Windows Pro 8.1

    A week ago my laptop with Windows Pro 8.1 was a significant error and he stopped, then I restarted the operating system with a previous image of the hard drive C. I reinstalled another printer and I tried very time to reinstall the HP Deskjet F4280 all-in-one with the latest driver and with the installation of the Printer Wizard uploaded by HP web site. Unfortunately every time installation fails during step "product configuration" after a lot of minutes to expire. The error was the last time.

    CSetupWrapperApp: No section name specified on the command line
    = Application did not return ERROR_SUCCESS. Returned 0 x 1
    LaunchApp (x:\hpqtra08.exe-arret, 1, 00000000, 00000000) failed with 2
    Error opening key HKLM\SOFTWARE\Hewlett-Packard\Install\{8C925017-72A8-4C4A-AF21-84901E26638F}. error = 2
    Timed out waiting for event of finished product.

    I used your HP print and Scan doctor and I followed all instaructions and in the end, no solution has been discovered. Other applications normally run without problem and laptop works fine. I installed Windows Pro 8.1 almost a year ago and until a week ago, I have no problem with the HP printer above. I can solve this installation problem?

    Best regards

    Francesco Patrignani

    Multifunction,

    Thank you for the update. The registry document I sent should apply to all computers in Windows 8. Please try to follow these steps.

    If you do not provide the error log, which could be very useful. This will help me to refine the question. Also, I do not fear spend 20 minutes reading code until something is different.

    I will help you with pleasure until the issue is resolved. If you find my help, you can keep tagging my posts with congratulations and accepted Solutions. It would be appreciated.

    Have a great day!

    Mario

  • Unable to print my F4580 all-in-one of my MacBook with OS x via USB

    Hi Forum,

    I have a HP F4580 all-in-one printer/scanner that worked fine on my old laptop with windows vista.

    The laptop is dead now so I thought I would try Apple.

    Now I need to print some stuff for work, but it does not produce anything.

    It is connected via usb and has been implemented on the Mac through the Preferences system and printer & Scanners icon, but when you click on print the document that you want the small printer icon on the dock at the bottom, but the printer does not ever print anything!

    Anyone know what I could do wrong or if it unifies works through OSX.

    Help, please.

    Much Willow1980 thanks

    No problem!

    I would recommend to fix permissions of the drive on your computer by following this document Apple here. Once this operation is complete, make sure that your Apple updates are done by following this document Apple here.

    Now, I would reset the print on your computer system. Please follow this document Apple here. If your USB connection does not correctly, follow this document Apple to USB: Troubleshooting Error Messages. I will seek forward to hearing from you again!

  • Cannot print using the All in one 924 since filling of cartridges.

    Original title: all-in-one 924

    my printer is a dell all-in-one 924 photo and I had my cartridges refilled by a local ink store, however since I brought them home and put them in the printer the printer does not seem to recognize. I don't understand, can someone have an answer

    This occurs now and then with the refills and cartridges advantage trati. Many manufacturers of printers do not allow them so they can earn money from the outrageous prices they charge for new ones. Contact Dell.

  • print allignment page all-in-one HP PSC 2400 turns off the printer features

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    Hello

    You can get a faster solution on the Support Forums of HP printer.

    Here is a link for your convenience.

    Printers and all-in-one - HP Support Forum's:
    http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

    Select the appropriate forum for your device.

    Concerning

  • HP Envy printer 110 e-all-in-one D411a

    12 pages of scanner that should go in a single document.  How is this possible with the hp Envy 110 e-all-in-one printer D411a?

    Hello

    What are the exit/scanned files?  They are pdf files? If so, you can try a product called PDFsam. You can download from the following link:

    http://www.PDFSam.org/?page_id=32

    This free product allows you to split a large file to many small files and also to merge several pdf files into a pdf file.

    Kind regards.

  • HP All in one Printer 4515: HP All in one printer 4515 Setup error

    I bought a HP All in one Printer 4515. I started installation, in order to implement, it worked fine, I scanned the page to adjust the calibration of the toner. During this time blue light which is used to the wi - fi connection always blinking since the beginning of the installation of the printer.  I do know that if the flashing is right, I found it strange...

    I downloaded the www.hp.com/ePrint/DJ4510 Installer and started installing.

    When I started to configure the wi - fi connection, I failed. Installation software wrote me to retry the configuration.

    I did and the printer display began flashing, he wrote to me that there is a mistake of the printer, and I have to stop him.

    So I stopped, but the blue screen appeared and he wrote: BV815424C. Because then I can not start even the printer, because when I press the power button and start the printer on the printer screen, the same message appears that I need to stop it and it is possible that this situation repeats itself all the time and the blue screen appears with BV815424C.

    This situation occurs for the second time. I have new bougtht printer 2 weeks ago and the same situation has happened, it's HP second All in one 4515 printer that I have instead of the first damaged...

    It is a problem of the printer and I need to return for the second time or is it possible to fix it?

    Hey @dijanas,

    Welcome to the HP forums! I hope you enjoy your stay here.

    I understand that you have some problems with an error code on your Deskjet Ink Advantage 4515 e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to resolve error messages on your printer.

    If after following the instructions above, you are still unable to initialize the printer and the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

    I hope this helps with the error message and I hope you have a great weekend!

    If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

    If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

Maybe you are looking for

  • Can I retrieve text messages from the phone memory?

    Can I retrieve text messages from the phone memory? I read that it is possible via iTunes and third party programs. It is of course possible, can what third-party program you recommend? (because I have no backup in iTunes)? I need to backup this mess

  • His fight problem repeats all the time

    the 2 (noise control) repeats all the time? answer me on * address email is removed from the privacy *. Uploaded by Isohunt AOM

  • Failed to update 80070641

    Hello Are you logged in as administrator - you run the patch by clicking right - RUN AS ADMIN (if possible) tooland it is also possible that you don't need the patch tool. Some of these updates may not be necessary either - you can control panel - Wi

  • I can't get any printer work with Windows XP too more.

    I can't get any printer to work with my computer which uses Windows XP.  I checked with the companies of the printer and it is not a driver problem.  In addition, these printers all work on other computers that use Windows XP.  In addition, they work

  • indexOf problems

    In my code, I upload a HTML file, convert to an array of bytes to a string using: String s1 = new String(byteArray); When I view s1, it seems to be an exact replica of the HTML file. When I use indexOf on s1, any search string I use,-1 is returned (e