Printer hp laserjet P1102W wireless light. Windows Vista operating system

Similar Questions

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• The Windows Vista operating system on dv9000 was arrested.

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  lbwhorms wrote:

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  You may need to contact HP in your region or Microsoft by phone.

  If he please go through these papers & try the above first steps:

  Activation of Windows Vista operating system

  You may be prompted to activate Windows Vista on a computer on which Windows Vista has already been activated by a license in Volume or OEM installation

  Concerning

  Visruth

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Hello. Can you help me get my built in webcam doesn't work on my Advent laptop with windows Vista operating system thanks

  Hello. I have a very nice laptop Advent and would love to get the built in Webcam work. Can you help me please? I have the windows Vista operating system. Thank you jeremy in Great Britain

  PS my grade o level B in computer science from Cambridge arriving 1984 useful! Thank you

  Hi Jeremy,.

  1. what happens when you try to access the webcam?

  2. have you updated the software and drivers for the webcam?

  You can check if the webcam is detected in Device Manager and also try to update the drivers.

  a.Click Start and type device manager in start search and press ENTER.

  b. in Device Manager check if the Webcam is listed.

  c. right click on the webcam and try to update the drivers.

  For more information, you can consult the following article:

  Updated a hardware driver that is not working properly

  You can also see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer. You can also ask advent and are looking for the same thing.

  Support of advent

  Hope this information is useful.

• You are able to use the CD of Windows Vista operating system on a laptop that has Windows 7 Home on it to use the Interface of Windows Vista?

  My situation is that I have a laptop that is a Windows 7 machine. I have a need where I'm considering purchasing a CD of Windows Vista operating system. It comes to be able to use the Interface of Windows Vista? I have a technical support of experience under my belt and I remember that if you need to have a different operating system available that you can use this operating system without installing it on your system.

  I really could use a version of Windows Vista now my educational purposes. My current computer has Windows 7 home running on it right now. Could you or someone give me Options to work with. I'll look forward to your response.

  Thank you

  Gary

  Q: "you are able to use the Windows Vista OS CD on a laptop that has Windows 7 Home above to use the Interface of Windows Vista?"

  A.  No.

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec. Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  Trying to download music from itunes on a Windows Movie Maker 6.0 file and receive an error msg stating not installed codec.  Windows Vista operating system.

  ==============================
  The following thread explains how to convert
  the files to a different format... iTunes then
  You should be able to import them.

  Need help to convert itunes to Windows Media
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f496ae8e-d3f9-4336-BB3C-8070421c8eff
  (Scroll to the bottom to detach the message by: musiclover101)

  Or... use the following freeware to convert your
  already downloaded files to the .wma format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your files in iTunes on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I bought 13 PS elements and did not know that the Windows Vista operating system is not supported by this version.  How can I exchange the PS13 bought for a version of Photoshop that supports the Windows Vista operating system.

  I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported.  How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?

  Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.

  Please see return, cancel or Exchange an order - Adobe

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• In the creative cloud applications can be installed on a Windows Vista operating system?

  In the creative cloud applications can be installed on a Windows Vista operating system?

  You can see the tech specs for any product you are thinking about installing via the page following the link to the software Creative Cloud:

  http://www.Adobe.com/products/creativecloud/tech-specs.html#requirements

• Compatible Windows Vista operating system

  What are the minimum hardware requirements for the Windows Vista Capable operating system requirements?

  Vista Capable and Vista compatible are 2 completely different things, which is not a matter of discussion for these Forums...

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx

  Above the Microsoft link recommended specifications material minimum for Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

  After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office.  Old software active sync is not compatible with Windows Vista.  At my pocket PC eventually become outdated.

  Hello ariccia473,

  Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  If this isn't the case, then you will need to check with Dell and see if they can be of support.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to recover the Windows Vista operating system on laptop

  I have unix opreating system in my laptop (exhaust). First of all I can get all my documents and application. Secondly, how can I recover my window vista opreating system. Please give me your advice.

  * original title - how to get back my window visited opreating system *.

  Programs must be reinstalled from the original media: CD, DVD, etc..

  Save your data on external hard drive, Flash drive, etc...

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner