Printer HP Officejet J4680 series agreeing is not the network security key

Similar Questions

• using the printer - HP officejet J4680 series

  I have windows 7

  my printer hp officejet J 4680 does not work and I don't know what to do, I think I messed up some how... I can remove it and you can send me a link to reinstall it on my computer?

  Thank you so much

  Darcy wark

  {Information}

  Yes, you can remove it by going to your control panel.
  1. Select programs and features.
  2. choose uninstall programs.
  3. Select your HP printer to uninstall

  Here is a link that you can follow to download the drivers and software on the computer.
  http://goo.GL/BVOOg

• Photosmart c4580: how to reconnect wifi printer after I changed the wifi network security key

  I changed my network security key and now my printer cannot 1) added a new device and 2) appears offline.  I restarted the printer.  How can I get the printer on the network after I changed the network security key.

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I have a printer hp officejet j4680 and windows 7. I can't use the cd to install for analysis.

  I have Windows 7 and I have a HP Officejet j4680, I couldn't use the instillation Cd to install the printer, but my computer has found the driver. The problem is that I have to analyze something and scan Windows fax program cannot find the scanner. How can I make the computer recognizes the part scan of the printer?

  Thank you Sandy

  Hi Sandy. I suggest if you could go to this site http://www.hp.com/customercare and find your product here. Once do you it please download the Setup online to re register the printer on your computer system.

  Because if you don't base drivers will not install correctly.

  Thank you!

• OfficeJet Pro 8710: safety code for the network

  You want to connect my 2nd computer and printer. When I try to connect to the network 8710 she prays for the security key. How can I find?

  Your security key is your router SSID password that only you know. Check on the bottom of the router for a label. If this is not the case, go to your routers web page and look it up.

• try to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926

  I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926.  When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer.  I had it once before but a relocation removed.  I'm not sure why I see the desktop of my laptop printer but cannot get it working again.

  Any advice?  Thank you

  You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system...  Maybe when you reinstalled you forgot to install these things.  Try this and see if you can then print.

  If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Officejet J4680 series: all-in-one HP Officejet J4680 series will not print Word documents

  My HP Officejet J4680 all-in-one ink jet printer will not print in Word 2010 documents. It will print .pdf and Excel 2010 documents. I ran printing HP and doctor Scan and check it and put to date and said all is fine. Just around checking on my computer it said in the devices that the printer is ok. I printed the test from the doctor of Hp Plug and it came out ok. Seems so that Word documents are the only problem. I installed Windows 10 earlier so not totally sure that's the problem I don't remember if I used the word since installation up to now.

  I bought this printer in 2010 and have had no problems with it and I can tell you that I have printed a large NUMBER of pages.

  Any ideas how to get this printer working?

  Thank you!

  Hey @Ric88xx, welcome to the Forums of HP!

  I'd love to help you with your JO J4680. I understand that you are unable to print from Word, but you can print the PDF and Excel. Please use the following article from Microsoft to solve the problem and I would like to know the results of your efforts: How to troubleshoot printing in Word failures.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, let me know and I will do everything I can to help. Thank you.

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• OfficeJet Pro 8000 Wireless does not detect network

  My Officejet Pro 8000 Wireless suddenly doesn't work when connected via USB.  Don't try to re-run the HP Installation Wizard, the program reports no network detected (if the printer is right next to the Macbook Pro, which has a full signal from the network).  If I manually enter the SSID he says that he finds not only the network.  Network Configuration AMPe reports

  Network offline status

  802.11 wireless status disconnected

  Wireless on COLLAR

  Wireless works FAIL

  Network name (SSID reported no run)

  0 detected wireless networks

  The blue wireless light is turned on.

  Any suggestions?

  I appreciate the try, Dean, but again did not make a difference.

  I talked to tech support and they put me through presses the button to reset the network settings and then drain power printer, and I'm back in business.

• the confirmation to print on a single fax number and not the entire

  Is there a way to set the fax to print a confirmation on selected numbers page and not all? Thank you

  Hi lynnlevien,

  Because of the limitations of the interpretation of the signal, there is no way to print confirmation reposts only from specific numbers.  The feature may be turning on for all faxes to be disabled.

  Please let me know if you have any questions.

• HP Officejet Pro 8720: AirPrint works not the iPhone

  I've implemented a new Officejest of 8720 Pro. I have a mac and wireless printing works great! HOWEVER, when I try to use airprint on my ipad or iphone he says that does not find all printers!... I assured I'm on wifi even as the printer, etc... everything seems good...! HOWEVER, when I open the printer utility and go wireless... under the drop down menu to airprint, it shows it's disabled and provides the following message «»

  "You can't use this feature because it has been disabled. For more information, contact the person who set up the printer. »

  I don't know where, in the settings or options there is something that allows me to run this function or OFF... especially when my MAC seems to be the impression very well...

  Please advise!

  Another strange thing... it seems that the firmware update function is off too because I tried to see if I have the firmware Pat and he told me that was turned off as well!

  Please advise!

  Nice day!

  Make sure that Hello and PPI are activated.

  Otherwise, this could be due to Admin disabled AirPrint, check via SAP:

  1 settings

  2. Security

  3 settings administrator

  Please let me know if this solution help you.

• Portable PRINTER HP OFFICEJET 4630: How do you define the time in 4630 Officejet?

  Hello, this is a question already asked here, but there is no correct answers. I, too, put the date and time when the installation. Later in the day, the time jumped before 4 hours on its own. Cannot find anywhere on how to reset the time on my PRINTER HP OFFICEJET 4630. Would be deeply grateful for the help as Support HP doesn't help. Thank you, frustrated

  Hello

  You should be able to press the arrow button on the control panel until you arrive at a menu called Preferences. Once you select that, you should see an option to Date/time and should be able to update both here.

  I would like to know if it works.

• Resolve error: series 1200 Protocol not supported network home

  1 Laserjet 1200 HP

  2. Windows 8 64-bit

  3 Error Message: PCL XL error

  Subsystem - kernel

  Error - Protocol not supported

  Operator - 0x0

  Position - 0

  4. no changes to the network printer

  Have already installed a printing device to a laptop connected to a shared printer on the desktop computer.  Installed the HP Universal printing PCL 6 (v 5.6.0). Also have a printer all-in-one wireless inkjet that works successfully from the laptop.

  He worked successfully for about a month. Then suddenly would not print, but has continued to communicate with the printer via the office. Wireless printing still works fine.

  Print path

  Laptop to router to desktop for printer 1200

  Configuration of the laptop Port

  Port: \\DesktopName\hplaserj

  Port Description: Local

  Printer: HP Universal PCL 6 (v 5.6.0)

  To date:

  1. have you deleted device printing PCL 6 of the laptop, reinstalled.

  2. the footsteps of PCL 6 removed from the register; re-installed the printing device, deleted the old port and created a new port.

  3. just did print no, same error message.

  4 repeat step 2, but installed the universal HP PCL 6 driver. Same result and same error message.

  Can anyone suggest something else to try or point me in the right direction?

  Basically, Shlomi has proposed a solution that worked. Thank you.

  That's what I actually did.

  For Windows 7 and 8, HP has apparently developed universal print (UPD) for the old PCL 6 and PCL 5 drivers. Had already downloaded the 64 bit version of the UPD PCL 6. 64 bit versions re-downloaded and re-installed UPD PC5 and PCL 6. It wasn't the problem.

  Then I followed the suggestion to connect directly to the printer 1200 via the USB cable.

  1 first removed from the registry, references to PCL 6 and PCL 5 printers

  2. then restarted the print spooler (computer-> manage-> services)

  3. Add a printer in devices and printers, this time using the DOT4 port.

  4 bingo, could print a test page.

  5. from print properties, change the local port to \\computer name\hplaserj, the shared printer on the wireless network.

  7 bingo again. Has been able to print a test page and were able to print additional documents.

  Still don't understand what the problem was or what caused it suddenly appear, but it works now.

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi