Printer HP Photosmart 6510

Similar Questions

• Photosmart HP 6510: Personalized printing HP Photosmart 6510 problem

  I have read through a couple of threads and followed the instructions to turn on 'custom' on my HP Photosmart 6510 all-in-one printing. I loaded the driver of HP Deskjet 450, which finally allows me to select a custom size of 5.5 "x 8.25". I'm trying to print on wedding invitations response cards. Wedding invitations made the same paper 5 X and can be printed without adding a new printer driver for the 6510.

  Now that I can get the printer driver (deskjet 450) to recognize the custom format 5.5 "x 8.25" but I can't print. I use a model of design by Staples and get the following errors.

  Errors - the margins of Section 1 are set beyond the printable area of the page. Do you want to continue? I pushed Yes and the printer tries to print the job abd I get the error "paper mismatch". The printer actually determined the size of the paper when I adjusted the paper tray to accommodate custom size paper.

  Troubleshooting - I tried to adjust the margins, but I have little ability to adjust in the template provided. When I adjusted the margins, I always get the error "paper mismatch".

  Any ideas on how to do more troubleshooting?

  Hello

  Please retry the procedure which should solve the problem below.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• Printer HP Photosmart 6510 sends only encrypted or corrupted my computer .pdf files.

  My PDF editing software cannot read any file produced by scan on my HP Photosmart printer.  Whenever the software displays the following message:
  "Cannot open PDF file for editing, because it is encrypted or corrupted."
  My printer is HP Photosmart 6510 e-All-in-One B211a; Product number: CQ761A #B1H.
  My software is WordPerfect X 5, and it opened to all other documents .pdf - so normal text or tables - I tried on my computer.  All have been opened in a format that can be edited.
  My computer is a HP Pavilion dm4-3050us laptop new, operating in Windows 7 Home Premium.

  Hi mt88,

  If you are looking for editable text scans, you can buy OCR software that will allow you to scan to the editable document.

• printer hp photosmart 6510 all-in-one that is no longer printing from wireless router

  We are a company of cross-Cross-Country/letters/heavy-long-mail.  We need the ability of the State permitted by e-mail to our drivers in their trucks, no matter where they are in the country.  This particular case is one where the printer worked and works very well, for 6 months.  Yesterday, 29/11/2012, it has stopped working.  We had our printer driver restart and it still does not work.  What should I do?

  Looks like you are using a (lighter cirarette) 12V to 120V ups.  Not only the tensions are different, that they must also convert DC to AC.  The result can be a few strange waves that the printer may not like or wait.

  I don't know what to tell you other than to stop and plug the printer into an ordinary wall outlet.  You might search high inveters of range.  Google "inverter pure sine.

• scanner can not find the printer hp photosmart 6510 e all-in-one

  I tried all the help and downloads to try that works - I don't have the disk.  Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan.  He says that it cannot find the printer.  I tried to download all the drivers etc from windows, hp Web site.  He says, make sure that it is connected to my computer?  If the printer is connected wireless why my scanner isn't?

  There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance

• Apps for printing on Photosmart 6510

  Until a week ago, I was able to print apps, but now when you select the apps icon, I get error message saying "connection server error:-1. I have not changed the settings on my computer or internet connection. I am still able to print web pages, applications etc. Even if the printer indicates that it is connected to the wireless network, I kept restoring the factory settings and re established the connection through the Wireless Setup Wizard. I tried everything that has been written on the forums, but without success. Any advice would be welcome.

  Thank you

  Sorry, I forgot to tell you that web services reset would remove your printer from your eprintcenter.com account.

  A new code of the printer should print when you enable web services on the printer, then you can add your printer to your account. You will not be able to use the same custom ([email protected]) email address you used.

• Printer HP Photosmart 6510 e-All-in-One no ANALYSIS DO NOT THE PAGE WHOLE?

  Does anyone else have this problem?  I tried to scan a brochure, which I can have a file in my computer and throw the paper, but it keeps half the analysis page.  Is there something I need to do?  Any help would be appreciated, thanks.

  (I'm scanning it wireless if it has something to do with it, which I doubt)

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Photosmart HP 6510: HP Photosmart 6510 cannot print in black

  Like everyone, I tried all the reset standard and practices of head cleaning.

  Can anyone send me please the new reset instructions?

  Hi @gpn44,

  Welcome to the Forums of HP Support!

  I understand you have a print quality problem with printer HP Photosmart 6510. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did a lot of good troubleshooting already. You followed this guide, Printers HP Photosmart 6510 - printer prints blank Page or does not print black or color ink?

  I can send you the steps to perform resets itself, however, I don't think it will do everything for the same problem.

  The cartridge is either dirty, defective or the print head is clogged. This print head is not removable, customer, but if the printer is out of warranty, you can try the steps outlined in these videos.

  This video shows you how to do a manual print head cleaning. I suggest you to watch the two videos before proceeding and use at your own discretion.

  Video: HP 5510 will not print black and color - print head removed and cleaned.

• Network Installation unsuccessful Photosmart 6510 Windows XP

  Wireless printer: HP Photosmart 6510 B211a

  Router: Netgear WNDR3700, 802.11 g, WPA2-PSK

  Windows XP

  Photosmart 6510 series driver and SW ver 24.2.0

  When I try to install the driver, the Setup program reports "installing network without success." The installation program detects the printer, but does not end.

  The printer has network connection. It responds to ping, it works with HP ePrint, it displays Web pages on its IP 192.168.1.2. Test report wireless says that everything is OK.

  I uninstalled and reinstalled several times without success. Always the same problem "network unsuccessful installation.

  I'm looking forward to advice on how to solve the problem.

  I rebooted the router and re-installed the driver. Network installation has always fails. So I ran the Print utility and doctor Scan. Printing and scanning doctor found that the driver was not installed and advised me to download the driver from the HP site package Support & drivers.

  I downloaded and installed by using the downloaded driver package. The installation was interrupted by a Win32 exception:

  

  I installed the driver once more (without uninstalling), now with SUCCESS! My Photosmart 6510 is now running.

  Thank you!

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Photosmart 6510: PS 6510 won't print black

  Printer cannot print black ink. I ran the cycle of cleaning several times. The cartridge is new. Gets moderate use with periods where it is not used. The printer is out of warranty. Mention was made in another series of posts on this problem that there may be more specific than just running instructions once again the cleaning cycle.

  Try here.

  http://support.HP.com/us-en/product/HP-Photosmart-6510-e-all-in-one-printer-series---B2/5058334/model/5058335/document/c03760633/

  Let us know.

• I have a printer/scanner HP Photosmart 6510 who will now analyze.

  I have a Vista Ulitimate operating system.  The system is connected wireless.  Printer works fine.  Scanner worked but not now.  I get an error message when I try to scan "HP 6510 found" have checked the Device Manager and the device appears.  I've updated the drivers all to nothing does not.

  No changes were made to the computer.

  Help!

  Hi patricia05,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-100190-1&CC=US&DLC=en&LC=en&os=2093&Product=5058336&sw_lang=

  I would like to know if you are able to scan?

• I have a Photosmart 6510, which will not print in black.

  My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

  I tried all the basic tests & troubleshooting but who still have the problem.

  It allows to print from the photo tray 4 x 6 end.

  Help, please!

  Steve

  Hello bcgoodwrench,

  I don't see you mention the presence of 'BLACK'.

  
  If there was no black printing, then I would say you call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836 .

  If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP