Printer HP Photosmart all-in-one, the box of Windows 7 lost my status of the printer at the bottom on the right

Similar Questions

• HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

  My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

  HI JourneysLady,

  I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

  --------------------------------------------------------------------------------------------------------------------------

  Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

  ---------------------------------------------------------------------------------------------------------------------------

• HP PhotoSmart all-in-One Installer crashes in Windows 7 64 bit

  Downloaded PS_AIO_02_Net_Full_Win_WW_130_140.exe to support my HP Photosmart 7280 connected to the network printer/scanner on my PC running Windows 7 64 bit HP Pavilion HPE . Installation hangs with"control...". ». Patience is not the issue; 8 hours later, it is still "control system". ».

  TAKS Manager shows hpzsetup.exe HPZstub.exe and HPZwup01.exe running but never with CPU not null.

  Before that, the PC had been able to use the printer on the network to print very well with the help of the default driver, but I need to use the scanner, hence the need for the installation of the complete all-in-one software.

  A HP computer with an HP printer by using the latest version of the software downloaded freshly from the HP site: this should work out of the box. Someone please advise.

  Problem solved, but not the way everyone likes, because we know not the root cause. I did a reboot on the PC. After that, the all-in-one installer worked well. (I hate when that happens :-)

• Wirth problem Scanner printer HP Photosmart all-in-one.

  How can I activate the scanner on my HP photosmart all-in - one printer?

  How can I activate the scanner on my Photosmart all-in-one printer?

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• Photosmart all-in-one HP C4480: printer will not print. Incompatible ink cartridges

  My printer has suddenly stopped working, of course, comes "incompatible cartridge". For the next two weeks, I tried everything I know and everything that I could find (even the Forum Support HP's. I received a response from you, but it was a response to a problem that I didn't ask) now I'm in the never never land. This is the third set of cartridges that I have tried. They are all HP cartridges.  My computer is s3700f Slim line, my printer HP Photosmart all-in-one, C4480.     Thank you for any information you can help me on this aggravating problem.         Meiko

  Hello Meiko,

  Welcome to the HP Forums.

  I see that you have a problem with incompatible ink cartridges.

  Please click on the link following which treats a 'cartridge problem', "Incompatible cartridge" or "Cartridge missing or corrupted" Message is displayed on the computer or the printer control panel.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions: click here.

  Thanks for your time.

• How can I print to hp photosmart all-in-one ipad 7280

  How can I print to hp photosmart all-in-one ipad 7280

  Hello

  But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.

  You can find the steps to get and use the application in the following document:

  http://support.HP.com/us-en/document/c02775166

• Printer error 0x610000f6 General on Photosmart all-in-one C309n

  Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6.  I have to press OK on the screen of the printer to empty before printing again.  Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done.  Help, please!  Thank you!

  The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.

  Print quality:
  http://goo.GL/dZvCV

  Bob_Headricks steps to physically clean the printhead:
  http://goo.GL/DfroJ

• How to enable print double-sided on 6520 photosmart all-in-one

  How to enable duplex printing on 6520 photosmart all in one running on windows 7

  The Photosmart 6520 support automatic duplex printing.

  You can follow the penlow stes to set duplex printing:

  http://support.HP.com/us-en/document/c03476083

  Shlomi

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• Photosmart all-in-One b210a: Black is not printing

  Hello world
  I have a problem with my printer, a Photosmart all-in-One b210a, connected wireless to my network. The problem occurs when printing: it seems that the printer doesn't print anything that uses the color black or black color itself.
  I tried to clean the print head and it only prints the other colors (one line). I tried also to change the ink cartridge, but nothing to do; I tried to align the cartridges aaaand it is said that the alignment is not (it only printed the blue lines) and everything in the Tools menu, but not reset the configuration.

  I also tried to print 10 Windows and OS X (a color and a black and white document). The same result at a time when black and white document printing: not black.

  Any ideas? Thank you.

  Alexander.

  Hi @AlexandrCerutti,

  Welcome to the Forums of HP Support!

  I understand you are having print quality problems on your HP Photosmart Wireless e-All-in-one printer - B210a

  Printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did most of the resolution of the problems already. The print head is probably clogged or will need to be replaced.

  NOTE: I would be cleaning several times to try to resolve the problem with the print head.

  Please confirm that you have tried the steps in this guide: HP Photosmart Plus B210 printer - color or black ink printing not.

  If the problem persists, the print head should be cleaned.

  Check the status of print head warranty:
  If you have a faulty cartridge or print head, it might be under warranty. To check the warranty on your ink supplies, go to tohp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

  Printhead replacement games are available from HP customer or authorized service providers assistance.
  ATTENTION: Wait until you have a new available print head Assembly before you remove the ink cartridges. Do not leave the ink cartridges out of the printer longer than 30 minutes. Can result in damage to the printer and ink cartridges.

  If the printer is out of warranty, you can try the procedure in the video below. Please use at your own discretion.

  Video: Manually clean the print head on the HP Officejet 6500 printer

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well