Printer installation problem. Watch is printers and fax machines, but does not print
I had to move my printers due to a collapse of the motherboard. I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port. I replace the cable with a USB printer and I tried to install if via a port USB001 printer. The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder. However, it does not print. Any document disappears into the other, is not listed as a document to print, but it does not reach the printer. I did everything I can find listed on the HP web site and run the FixIt program nothing works. A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid. I think that I had uninstalled to printers to my computer until I tried to install this printer. Now, I wonder if these "invalid" entries are mucking up of my installation. How can I remove 'Invalid printer' names in my list of installed printers. It seems in any simple way.
I have my sure others must have had similar problems, but I can't find it on the net.
Any help would be welcome.
Thank you
Thank you, Tom,. I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated. This isn't HP; That's the scammers try to sell you anything for an exorbitant price. As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust? Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me): I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print. What printer you put as a default? This should be where the printed document (Word of the device - expected :-)). SC Tom
http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/
Tags: Windows
Similar Questions
-
first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.» Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?
Jürgen Freund
First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?
I found this YouTube video about the error 126 precisely to solve the problem.
How to fix the ERROR 126 when you open programs OpenGL - YouTube
The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)
LoadLibrary failed with error 126: could not find the necessary
Please let us know if it worked for you.
Thank you.
RTA
Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.
-
I accidentally deleted my printer HP deskjet F2180 of printers and fax machines.
How to restore the printer above. I don't know where is the original installation disc.
Help
If you want to say that you just clicked on the icon for your HP F2180 and choose 'remove', you don't need the floppy, and you don't need to download anything. Simply connect the printer to the computer and it should be recognized and installed automatically - because the removal of the icon of the printer has not, in fact, deleted the printer driver.
If necessary, perform the following steps and install your printer:
1. disconnect the printer from the computer
2 reset
3. connect the printer to the computerIf this does not work, you'd better explain exactly what you were doing to accidentally delete the printer, as well as what happens when you do the 3 steps above. If you receive error messages, please do not paraphrase.
-
Back, forward, reload and stop also died in right click. Set the page lock also does not work, I guess because the URL is not displayed. This is the case since download FF4.
Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.
The secure page lock symbol has been removed in Firefox 4.0 and replaced by the How do I know if my connection to a Web site is secure?. Unfortunately, thieves were able to build a web page that will display the lock symbol, even if this isn't a https:// site. Which could deceive a large number of users into thinking that they were on a secure site.
-
iPhone 6s and carplay connected but does not work
It has worked before and now does not. I deleted the system carplay phone and indicated above. The iPhone says bluetooth is connected to carplay and carplay indicates it is connected to the iPhone, but it does not work properly. I can't get or receive calls. I hear the phone ring on incoming calls by speakers in the system several times and when I touch the phone button my steering wheel to answer does not work, or it shows the phone number entering on the radio screen. When I try to make a call, the iPhone does not, I call say they have heard their phones ring but could not hear me speak, phones sounds dead on both ends. I have to disconnect carplay to make and receive calls.
As side note my iPhone and carplay work with audio for listening to music, but who also has been removed from carplay so that I can put in place the phone carplay only system.
Any suggestion would be appreciated.
Concerning
Steve
Nevermind, I figured it. I completely turned off the iPhone and he turned his back, and then just followed the car game voice instructions to synchronize.
-
7640 envy: Envy 7640 fax passes but does not answer an incoming fax
Passes the test fax setup but doesn't answer incoming fax
Hi @Charlcar1, -
I installed fifa 12 in windows 8 notebook pc it works off kick is perfect, but when I play the game there is no game movement is stuck and sounds work depending on the game. my system configuration is AMD APU A8 - 5545 m with graphics Radeon (TM) HD 1.7 ghz
Windows 8
4 GB of ram
laptop Sony vaio
Mithun Hello,
Thanks for posting your query in Microsoft Community.
I understand you have questions, playing fifa 12 in the computer of Windows 8.
In fact, this error means that the game is not compatible with Windows 8 in the computer. You are referring to the suggestions contained in the below mentioned thread where the same issue and how to install the program in compatibility mode and see if that helps.
FIFA 2012 does not work with windows 8
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
My HP Deskjet F2480/F2400 printer it is printed and copies normally but does not scan
My 3 in one printer printed + copy + Scan I use to print and copy with it but it doesn't scan.
Hello
Your best resource for help is supported for HP.
HP support, drivers, Contact and help | HP support:
http://WWW8.HP.com/us/en/support.html
HP Support Forum - Forums of Support HP:
Concerning
-
Our computers connect via wifi to a capsule of time to the airport and to the internet, but can't find the time capsule, nor can its hard drive. Y at - it a reset, we can try or he dies. It's only a couple of months.
Turn about your Airport Extreme for 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.
Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.
-
Using my site, but I cannot connect using mozilla firefox.
Clear the cache and cookies only from Web sites that are causing problems.
"Clear the Cache":
- Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox/tools > Options > privacy > Cookies: "show the Cookies".
If clearing cookies doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookies as cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.
-
I went to about: config and clicking browser.newtabpage.enabled clicked on it and then right click and rest, then went to browser.newtab.url and clicked on it and then right click but reset is not active, so can not click on it. How can I get the most visited tab?
What the page that you get if you open the topic: newtab page via the address bar?
See also this article on the page tab (topic: newtab):
-
I can see the new background under the former, but can't go down the old one.
Open Control Panel, double-click display.
Click the Desktop tab and choose "customize the desktop.
Select the "Web".
Remove all items except "my current home page".
Uncheck the "my current home page".
Click OK and now to select a background image
Click OK, and then close the dialog box.Follow-up with suggestion of cybertek.
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
Windows 7
HARD disk: Samsung Spinpoint 250Make a right-click on the icon my computer
Select manage in the 'breath' menu
In manage, select disk management
from that, you can then complete implementation, partition and format the new hard drive.
-
Hi all
We have a problem on one of our field of PC:- Parts of the printer in printers and faxes are missing.
- The print spooler service stops.
- Add Printer failed with the operation could not be completed error
Have tried the steps:
- Restart the print spooler service
The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server. - Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
All the steps have been followed, but still could not solve the problem. - Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
- Run sfc/scannow
- Run Chkdsk C:/f/v
- Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339
I'm out of ideas. Someone please suggest what to do about it.
TIA
ELL
Hi all
Fixed a problem.
It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values). A reboot is required.
Hope it will be useful for people who have this problem in the future.
Thanks for these folks spend their time to respond or read my question.
See you soon,.
ELL -
printers and faxes does not display when you browse another PC on my network
When I navigate to another PC on my domain using------(ComputerName)-I usually see tasks scheduled as well as printers and fax machines.
This is really useful when installation of printers and updating drivers remotely.
I'm running XP 32. I recently deployed a few new PC with XP pro 64-bit.
When you browse my PC on the 64 bits of the PC I see more printers and fax machines.
File sharing and printer is on.
There are 2 PC 64 bit I CAN'T veiw the printers and fax machines on. I checked eveywhere I can think and compared the two 64-bit pc (I can see the printers on one, and on that I do not see printers) and everything I find is the same.
I've read that it could be due to the fact that Quebec of printer on the new 64-bit PC was not yet open, and once it is open it should appear when browsing from another PC. I tried this and the printers and faxes are still not visible.
Printer queue is launched and running without problem. I also tried this restart.
Connectivity is good.
I have no problem either browse PC (32-bit and 64-bit) to other locations on my network.
I also tried navigating from 64 bit to 64 bit, and the results are the same that when I travel from any other PC. Some PC the list of printers and fax machines as well as scheduled tasks, some righteous display scheduled tasks.
Any help is greatly appreciated!
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Networking forum.
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
Maybe you are looking for
-
Satellite M30X: Screen doesn't work after sleep mode
I own Satellite M30X (model) after I left the laptop on while awhile, the computer went on standby to fashion. When I turned it on, the screen does not work, everything else is ok. I use the external monitor to the laptop. Everything seems to be in t
-
Spectrum of HP x 360-15-ap012dx: screen resolution of spectrum HP x 360 small
Hello I think my problem is because I have a screen resolution of 4 k, or nearly 4 k, and a lot of content is not developed in 4 k? I was wondering if there was a difficulty in this, or even if my phone does not display the content so small I can't s
-
Can not find platform for Windows Server 2008 update
Hey I tried to find the platform update for Windows Server 2008 (KB971644), but could not find. I even tried the updates option, as mentioned on your website, but could not do so, because when I asked to search for updates, it gave me an error messag
-
Types of EliteBook 820 m2 (ngff)
As far as I know has 820 two ports of m2 (ngff) style, I guess one for wwan and other for SSDS, I was wondering, what type of connection are they, are they sata or pcie and they are the same or different? Thank you
-
I have two laptops that are full of junk and nothing I need or want. So I would just reformat the hard drives. But I don't have the Windows disk so is there a way or an app to reformat delete all EXCEPT Windows OS? Or do I really drives?