Printer Installation Wizard

Similar Questions

• HP printer installation wizard fails to download/extract driver for HP5560 / Win8

  It seems that the driver for Windows 8 for the HP5560 is corrupt.

  I tried to download it manually with a bunch of other browser and the other PC, but with the result of sam - a corrupted file. The file must be about 183.4 MB, but ends always in 141 MB.

  When you use HP printer Install Wizard utility, it downloads also around 141 MB and ends with the error 'extraction failed.

  It's this diver I am using: http://ftp.hp.com/pub/softlib/software12/COL28654/dj-109970-1/DJ_SF_06_D5500_140_408.exe

  Hello Thomas.

  The damaged file has been replaced.  You can download it from: http://ftp.hp.com/pub/softlib/software12/COL28654/dj-109970-2/DJ_SF_06_D5500_140_408.exe

  Have a great day!

• Installation Wizard downloads and runs the HP printer

  Learn how to download and run the wizard to install printer HP (PIW). Printer Installation Wizard allows to solve many common installation problems, such as finding the correct driver for your printer, using your HP printer the same way that you used with your old operating system. Printer Installation Wizard is not available for all products, only works in Windows 7 and Windows 8, and you connect your printer to your computer with a USB cable to run the wizard. For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support. This video was produced by HP.

  I hope you find this information useful.

• HP Photosmart C4700: printer Installation

  I try to install my printer HP Photosmart C4700 on Windows 10 and the CD supplied with the printer is not recognized. Is there another way to install this printer? I saw in the previous questions, there's a link for people with Windows 8.1. Is there such a link for Windows 10?

  Its on the list of compatible printers Windows 10.

  I am surprised that the printer Installation Wizard did not find the drivers.

  Well, that ship has sailed.

  Try the following link.

  HP Photosmart C4780 all-in-One Printer

• c310 stuck printer installation

  printer has failed and when restarted / power reset it would not start past the sceen "initialization". does not meet any action, Inc., power button.

  Hi there are mech;

  What operating system and version are you using? Share it

  If you are using win 7 try this tool, the HP printer installation wizard.

  http://support.HP.com/us-en/document/c02691615

  Resetting power the printer can also help;

  Reset the power of the product

  1. Press the power button ( ) to turn the product off.

• I can't get my printer LaserJet CP1025nw of color appears on the installation wizard

  I am running Snow Leopard on my iMac. I downloaded the printer and the file of the software on the HP site. However, when I get to the Color LaserJet CP1025nw Printer Setup Wizard does not appear on the list even though I have just completed the installation.

  Hi Casey,.

  Sorry, had the wrong impression that you use a connection network caused the question sympthoms.

  Please make sure that the printer, USB is directly connected to your Mac and no more than 2 - 3 m long without using a USB hub or extension. It can cause serious communication problems. Please also plug the USB key into a different USB port on your Mac.

  If you have an iMac, also be sure to plug the USB key into a port on the back of the printer and not on the keyboard (like the keyboard ports are not powered and actually provide the same power as the use of a hub)

  On the Mac, click the Apple menu.

  While holding the ALT key, click System Profiler from the menu.

  In the left pane, click USB

  You see the printer listed in the right pane?

  If the printer is not listed under USB, this means that the unable to communicate with him without any problem of Mac software, so I would recomment USB cable it to try another.

  If the printer detected as expected, please let me know.

  Kind regards

  Shlomi

• Installation Wizard is unable to detect my print server

  Hi, I just bought a print server WPSM54g, I have ejecuted the installation wizard and I'll put up the product for the first time. In step 6, that the wizard does not detect the print server and I can't go any further with the installation.

  I downloaded the new version of the wizard, but the same problem appeared.

  I will appreciate if someone can help me solve this problem. I am running Win XP SP3, the printer is an Epson CX3900 Multiuse (latest drivers installaded) and I have a Linksys WRT54g wireless router.

  Thanks in advance.

  Connection: Printer ==> ==> router print server... Make sure that your printer drivers are installed...

  Check the settings of your wireless router wireless, follow the link here

  (1) for the installation of the print server, open your router configuration, click on the 'Status' tab and go the 'Local area network', under LAN sub-tab click DHCP Client table and find the IP address of the print server...

  (2) enter the IP address in the IE address bar and press ENTER, it should encourage user and the password for the print server... Enter the default admin password (if you have changed the password enter the password), and then click OK... You shoul see the configuration of the print server page...

  3) click on the Wireless tab and enter your network name/SSID and WEP/WPA security settings... Make sure you have wireless settings are identical on both devices (router and print server), if they are not identical, they communicate... Save the settings once...

  4) click the Protocol tab and select use the following IP address and enter IP address: 192.168.1.70(assuming votre routeur est 192.168.1.1) subnet mask: 255.255.255.0 Gateway: 192.168.1.1 and click Save...

  (5) wait 30 seconds and close IE and re - open, see if you can open the configuration of the print server with it of new IP Address (192.168.1.70) and click OK... Double check the wireless settings and see if it matches your router...

  (6) disconnect the Ethernet cable from your router to your print server... Unplug the power cable from printing to serve, wait 30 seconds, unplug the power cable from the router, wait 30 seconds, connect the power cable to your print server, wait for 30 seconds and connect the power cable to your router... Your print server must be configured by here...

  (7) to double check open th IE and enter the IP address of the print server and see if you can get to the configuration page... If so, your print server is configured... If this is not the case, see step 3...

  (8) now to launch the CD and select Computer Configuration and follow the instructions (if you are prompted for any IP address, remember to enter the IP address of the printer server)... Once this is done... restart the computer and see if you can print... Run the CD on the rest of the computer from where you need to print...

• HP installation wizard cannot find a printer

  I am using HP Photosmart C3100 all-in-One on a MacBook Pro. I reinstalled and tried all the quick fixes, but this remains a problem: while I can print fine from my computer, I can't scan. When I use the HP Installation Wizard, there not my printer.  HP Device Manager also cannot find the printer. Oh, how strange! Any help, people? Thank you!

  We invite you with pleasure

  Please remove the current software that is bundles with 10.6 following Uninstall HP under Applications > Hewlett-Packard.

  Once you have finished restart your Mac, download and install the correct software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1146331&sw_lang=

  Then, restart your Mac once more and run the software update to ensure that the most current drivers are installed.

  Please let me know of any problems,

  Shlomi

• HP printer Install Wizard download cancelled

  I tried to download HP printer install wizard 5 times, and in the last 4 seconds it cancels.  Why would he do that?  I need to install my printer on Windows 8 C6200 series.

  Hello

  have you tried to install drivers without using the HPPIW?

  Try to use the file below and check to see if that can help you:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110032-1&cc=us&DLC=en&LC=en&OS=4132&product=3194498&sw_lang=

  If the printer connected via a USB port, make sure to keep the cable disconnected until installation request to connect.

• HP installation wizard hangs in Mavericks (OS 10.9)

  I need a version of the HP installation wizard that doesn't crash in Mavericks, so I can set up my printer with my new router wireless. This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider just installed a new router, so I have a new wifi network which also works fine with everything else.

  Now I need a way to set up my printer on the network, because the installation wizard hangs in the Mavericks. Is there an updated version of the installation wizard that works with the Mavericks? I looked, but can't find any info.

  Thanks for any help you can provide.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• The installation wizard seems to stop

  I'm trying a first installation on a relatively new platform for win7 64 bit. Something about downloads, I wonder for permission to install, to grant him. Installation Wizard opens, decompresses at 60% and disappears. Tried several times, with or without MS security essentials, also in safe mode. Identical results in all cases.

  Can't identify anything in event log associated with Mozzila or Firefox (not familiar with tool). Ran AV and Malware scans.  Nothing.  Don't see anything in Win program removal or Revo Uninstaller to suggest partial installation.
  

  Try running the full installation instead of the Stub Installer

  • FTP://FTP.Mozilla.org/pub/Firefox/releases/28.0/Win32/en-us/
    • Download Firefox Setup 28.0.exe

• Satellite L350-171 - network printer installation

  I have problems to install my Canon Pixma IP4300 printer as a network printer. The printer is connected to a desktop PC, then a router, Dynamode R-ADSL-C4-2. This is connected to the laptop by a cable that was previously connected to my old laptop.

  How to install the network printer on the Toshiba. I went into Control Panel, then printers. I found the printer installation option and select the network printer. It then asks me to find the printer or print in manually. I tried to install it from the disc of Canon, but things stuck in the process. Should I have the disc atall? How to find what to call the printer?

  Any help much appreciated.

  Dear Trenny

  This question is posted on the right forum? Please do not be angry on me, but that has to do with network printers Toshiba.
  You have problems with your laptop satellite?
  All ports operate properly?
  Operating system works well?

  For the configuration of the network printer, you can find enough pages here.

• Whenever I try to install the printer Lexmark Professional 6600 series wireless, but each time said the message of the printer installation failed.

  Tonight, I tried several times installation/connection to the wireless Lexmark Professional 6600 series printer but every time the printer message said installation failed.  Why?  What should I do to connect to this printer?

  Title: original printer Installation failed

  Hello

  Sorry for the late reply.  I find the user guide to use this device.  Check page 128 for troubleshooting wireless.

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/en.html

  What version of Windows are you using then I can move you on the appropriate forum?

• HP Envy 4502: password printer installation

  I try to install the 4502 want on a Mac and asks me a password by the installation program. I thought maybe would it be Mac-related but Apple tell me it's the printer installation password is necessary.

  Hi @NancyGal,

  Welcome to the Forums of HP, I would be happy to help you install your printer. I understand that you want 4502 and trying to install you are be prompted to enter a password. The install password is always your Mac password. Macs are asked to enter a password whenever you install something. If you do not have a password for Mac you can leave the field blank and click OK.

  Please let me know if that solves the problem and if you need help I can help you further. If the question is indeed fixed, please click Accept button Solution below to report your post as solved.

  Thank you.

• Help with the download installation wizard.

  Hello

  I just got a WRT54G2.  My computer CD players do not work so I try to install the downloadable Wizard. I downloaded it from this page: http://www.linksysbycisco.com/US/en/support/WRT54G2/download

  What I get is a .iso file and I have no idea how do run as an installation wizard program.  I did research for a few hours and I tried some programs, but what they let me do it see files but does not work for the installation wizard.

  How to run the installation wizard the downloaded file only?

  Thank you

  -Pascal

  A .iso file is an image of a CD. Burn it to a cd - r with roxio or nero or other software you are burning. You can also try the magic disc (freeware) that will mount the iso image to a virtual cd drive. Your best best is probably just to burn it to a cd. Hope that helps!