Printer Laser HP LaserJet 5200n series does not print the halftone

Similar Questions

• Satellite C series does not recognize the CD/DVD drive

  Hello

  I have about a week he did something wrong and now my laptop recognize my CD-Rom drive.
  I guess I accidentally deleted the driver but I'm not sure of (I'm not a computer expert).
  What now? Someone has an idea?

  Thank you!

  Carina

  + The message was edited: translated by Google Translator.

  Hello

  I guess that you do not see the CD/DVD drive in MY computer area.
  Right?

  I think I can help you
  First go to Device Manager and search for CD/DVD drive.
  Select this device and delete it from the list.

  Now, open the registry (type regedit in the search) and remove the filters above and below to the following registry key:
  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet\Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

  The similar solution is located on the Microsoft page:
  http://support.Microsoft.com/kb/314060

• HP LaserJet P1102 CE651A does not recognize the new toner cartridge

  I installed a new hp for my Laserjet P1102 toner cartridge, but still get the message "install the black print cartridge"and the orange light blinks.  It worked fine until the toner ran out.  Have tried to reinstall the cartridge and you are using a compatible cartridge, without success.  Can I do, or do I have to repair the printer that appears to be a case to send far from a reconditioned unit?  I am disappointed that he didn't after intermittent use of less than 18 months. It was purchased as the reviews said it would be great for printing of volume, but I have not at this stage yet.

  Any ideas?

  I had the same problem. Remove all paper from the tray. Make sure that no paper is started in the printer. I then replaced the toner cartridge and it was recognized. It seems that if the paper is launched to feed into the printer, then the new toner is not recognized.

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Have a HP E709N series does not recognize paper size and only prints in color

  original title: have a HP E709N series with 2 numbers.

  (1) fax - does not recognize the format of paper on every page. He feeds a blank page out and I have to press OK to print each page.
  (2) when a print job is qued, it prints in color, not black.  Color cartridges are low, but I am printing black docs.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  using the information how to use etc. and drivers for your printer, please read the information contained in the links below

  drivers

  Choose vista or vista 64-bit according to your operating system

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3795406&LC=en&cc=us&DLC=en&submit.y=4&submit.x=11&lang=en&cc=us

  and read the information on the use of the manuals troubleshooting etc. for your model below

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3795406&LC=en&cc=us&DLC=en&submit.y=3&submit.x=8&lang=en&cc=us

  If that does not fix it try hp support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3795406

  or hp support forums

  http://h30434.www3.HP.com/

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• iMac does not recognize the function analysis of the LaserJet Pro

  My iMac has OS X v. 10.7.3.  It does not recognize the analysis function of the HP LaserJet professional M1217 MFP nfw which is connected wireless.  I can print with the HP success but the dialog box not incllude not a scan option.  I can't scan from preview or iPhoto or (as suggested by some rsources).  I tried to connect the printer LaserJet by USB but that doesn't solve a problem either.  I uninstalled and reinstalled the software, including HP PrinterDrivers.pkg.  I get the automatic updates from Apple which have not helped.

  Hello

  I apologize for any inconvinence,

  The Director of HP taken do supported by Lion for some specific models, including the M1217.

  However, as mentioned above, only the latest version of the software supported by Lion. any prior version of the software is not supported by the operating system.

  If you have not installed the complete softwatre features attached to my previous post, please be sure to install it. It is compatible with Lion you will find listed on the download page.

  Compatibility: Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, Mac OS X, Mac OS X 10.7 
  

  I appriciate if you can guide me where you see the information that the HP Director is not supported by the OS, I can't take any possible measure to get it corrected.

  Thank you and best regards,

  Shlomi

• HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

  Hello

  Shortly:

  Printing from z/os on HP MFP with stapling Mailobx joint - does not sort the paper. All the paper goes to an output tray, instead of outputb different locations, depending on the configuration of the printer settings.

  With more details:

  1 device (HP LaserJet Enterprise M4555fskm MFP printers):

  2 mailbox HP stapling 3 bins of 900 sheets (CE736A)

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA3-2888EEE.PDF

  Our Organization has Mainframe, where the documents are printed (ESF printing system, language PCL).

  We have 3 print queues in Windows print - P1, P2, P3 server. All 3 have the common TCP port - at the end, there is multifunction print device: HP M4555, where we tied - sorter of stapling to the 3 bins 900 leaves HP (CE736A) and configured in this way:

  1 P1 queue prints to: upper left bin.

  2 P2 queue prints to: average left bin.

  2 P3 queue prints to: lower left bin.

  When I print the test page from windows server to P1, P2 and P3 - ir printed paper properly in appropriate output tray. But my problem is that these print jobs, coming from the Mainframe to these queues - are not sorted by bin (P1 to P2 - in the Middle, P3, Upper - Lower) - the paper goes to a location, for example - Upper (or if not configured device in Control Panel mode mailbox - Lower).

  I have fought with this problem too long and cannot be resolved.

  Driver, that is used:

  HP LaserJet M4555 MFP PCL 6.

  P2/properties/Device Settings:

  Accessory output bin: HP 3 stapler/stacker - Mailbox Mode:

  

  Output:

  

  I already tried to change the settings to:

  1 Windows print queue server settings;

  2. from the device settings (side of built-in web server);

  3. the side HP jet admin web.

  Nothing happens. For me it is too difficult, which is priority 1, 2. or 3. option, see above?

  Location:

  

  Impatience on your part.

  Andrejs Sobolevs

  Service Desk COMPUTER team

  This problem has been resolved the side Mainframe, VPS printing system. Administrator has made the installation program there. There is no need to do it on the side of the unit.

  Solved.

• Driver for printer Samsung ML2165 does not load the States, it is not compatible on Windows 7

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I am trying to download a driver for a Samsung ML2165 printer but it does not load, he always says they are incompatible, and the port does not recognize the printer, any ideas please.  I use widows 7, on a Lenova 3000 series desktop computer.

  You did that you downloaded the correct driver for the correct architecture (32 or 64-bit) Windows 7, you use?

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  In addition, you should try to install the driver first before connecting the printer.

  1. install the driver

  2. restart the computer

  3. connect the printer

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• DVD - RW DVR-K17LF for the Satellite series does not read DVD but only to CD

  Hello

  I have a serious problem with my DVD player.
  He stopped to work. I mean, he's not reading CD but not DVD discs.
  I don't know what the problem is.

  I went on the internet and found no solution.

  Please help me.
  It is not a software problem, because my laptop does not start the DVD, but due to the CD...

  Hello

  The issue could be linked to the anomaly of the player's laser lens.
  Maybe the lens can not handle the DVD because of a physical constraint.
  In most cases, the lens can not calibrate properly and therefore different media would not work.
  In this case there is not much to do in most of the cases that the drive needs to be replaced.

  But maybe you could try to clean the drive s laser lens using a cleaning professional who could be bought from the other computer dealers.
  I don't very well if this will help but it s worth to try m

  PS: Try this:
  Remove the drive from Device Manager, access the registry and remove the filters top and bottom of this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop and check the functionality of s by car.

• Printer HP B209a does not get the IP address of my router

  Computer is a HP G71 running under Windows 7 64-bit

  Router is a NETGEAR's WNR3500L with the latest firmware and a unique SSID

  Using the latest version of the software install HP B209a

  Towards the end of the installation for the wireless feature, the installation stops and tells me that my PC is on a network other than my printer.  All wireless devices connected to my router have 10.0.0 # IP addresses.  Through many installs the printers IP address is constantly as 192.168.0.109.  The summary on the printer wireless shows my unique routers SSID but when I open my router software and devices attached, the printer is not listed.  My router is attached to a simple DSL modem with no wireless features.  I tried the following hotfixes recommended in these forums.

  1. Connect the printer to the router through WPS with push button.  Connection is returned as a success, but identified printer router SSID as grabbled alphanumeric characters and not an IP address.  Router does not show the printer in the devices.  During the printing installation software PC and printer fail to communicate when the USB cable is connected.
  2. Connect the printer to the router through WPS with PIN.  Connection is returned as a success, but all the information in the router has been changed and all other wireless devices disconnected.  Connection to the router has shown the SSID THAT became grabbled of alphanumeric characters and the security key was changed.  No wireless device was attached to the router, but the wired connections remain intact.  Fixed key SSID and security.  All other wireless devices back in place, printer does not have.
  3. Ping network devices.  Ping 10.0.0.1 to 7 came back as successful.  192.168.1.109 ping failed.
  4. IP address of the printer has entered into a browser address bar.  Returns a Google search page, but not for access to the network printer.  Address of more than one entry address bar and couldn't connect to 10.0.0.1 (router) and 192.168.0.1 (DSL modem)
  5. Unplug the DSL modem router.  All wireless devices to connect to the router but do not have access to the internet.  During the installation of the printer software, when you are prompted to connect the USB to the PC, printer and PC fail to communicate.
  6. Turned off the Windows Firewall, both public and private without success
  7. Used the Hp network diagnostic utility and it does not can find printer.

  I have installed and uninstalled the software several times.  The printer has always identified my identifier SSID is correct and the network key.  But during the finalization of installation I get the message and cannot connect PC printer because they are on different networks.  I have no idea where the printer receives the IP address.  It should be an address from the router, but it is not.  IP address of the modem DSL IS in the format # 192.168.0, but given that the modem is the base model with the wireless or network capabilities, the printer cannot logically connect to it.  I tried to unplug the router and the printer several times without success.  The possibility of changing the IP of the printer through the browser is not possible for the reasons given in 4.  What are the other options to change the IP address of the printer?  If I can assign an address # 10.0.0, I think it will solve my problems.

  Is your DSL modem is a modem/router combo (most are)?  If so, it probably has a structure of 192.168.0.X and is probably a wired router (only).

  This DSL modem/router is attached to the WAN, or one of the LAN ports on the back of the Netgear?  Try to move to the other type of port, and then restart both routers.

  On the front of the printer, click the settings 'Restore defaults' and wireless the wireless radio.

  Finally, the Netgear settings, here are some tips:

  1 make sure that DHCP is active, the SSID is not hidden and that MAC filtering is not enabled.

  2. ensure that the 802.11 g mode (as well as other modes is very well).

  3. use WPA or WPA encryption, not WEP (it is not secure and may cause connection problems)

  4 change the channel of the Netgear to 11 (Yes, I know it makes no sense, but it works).

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.