printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

Similar Questions

• Request does not give the same result according to the computer

  Hi all

  My problem is very unclear to me, so I'll try to explain it the best I can...

  So I'm almost finished my project, and I want to try it on another computer.

  In my project, I generate a txt through several file datas, can I use this file to display graphical information on a graph. It works very well.

  So I made a kit of Distribution following this tutorial: http://www.howtocvi.net/2011/12/how-to-make-distribution-kit.html

  I installed the .exe on another computer, and I launched the program.

  My problem is that, for the same data, I used previously, the program is not the same behavior.

  My tracks on the chart do not look like they should be.

  I don't know what are the causes that both programs use the same algorithm...

  If you have an idea, I'll take it!

  Thanks for your answers,

  Kind regards

  Jerome.

  Well, the example was just stressing that debug and release can behave differently, I thought not that it could directly apply to your situation.

  If I were you, I'd start checking the inizialization of the variables, since it is one of the biggest differences between these two scenarios.

  After that, I will add a few DebugPrintf to print relevant during the life of the program variables: DebugPrintf output can be seen in the window Debug Output while developing the program and in utilities like DebugView when running the executable, so you can compare his production in two situations.

  Normally, after some trial and error clarifies the situation and the appropriate corrections can be made to the code.

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• inputText and ouputText does not display the same value

  Hello

  JDev 11.1.2.4

  On my page, I have an inputText and outputText bound to the same link of the attribute. The bind value is defined in a value change listener, and then the two components are updated. Say I put in 2009 for the PeriodFrom, the inputText remains empty, but the outputText shows the 2009. How is possible that the two items related to the same link does not show the same value.

  < af:inputText value = "#{bindings." PeriodFrom.inputValue}"required =" #{bindings. " PeriodFrom.hints.mandatory}.

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  < f: validator binding = "#{bindings." PeriodFrom.validator} "/ >"

  < / af:inputText >

  < af:outputText value = "#{bindings." PeriodFrom.inputValue}"id ="ot3"clientComponent ="true"/ >

  Furthermore, I tried to get the RichInputText component and call a getValue on it, and the value returned is 2009. I'm completely lost.

  Thank you

  I made the fragment of page from scratch. I discovered why the update does not work. This is because the selectOneChoice is inside an af:subform. If I remove the subform, the update works correctly.

  shortDesc = "#{bindings." StdcntyCode.hints.tooltip}"id ="soc2"simple ="true"autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.identificationSessionEditBean.countryValueChangeListener}" > "

  columns = "#{bindings." PeriodFrom.hints.displayWidth}"shortDesc =" #{bindings. " PeriodFrom.hints.tooltip}"id ="id1 ".

  autoSubmit = "true" simple = "true" >

  columns = "#{bindings." PeriodTo.hints.displayWidth}"shortDesc =" #{bindings. " PeriodTo.hints.tooltip}"id ="id2 ".

  autoSubmit = "true" simple = "true" >

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• OfficeJet Pro 8600 does not recognize the 2nd paper tray

  I've set up the 2nd tray in system preferences by checking the box for an additional tray, although it seems sometimes to uncheck because when I go back to it is checked, it is not. Somewhere I found the Source setting and I saw 2 trays, but now I don't remember where it was to check again. However, when I try to use the parameters to define a default tray and lock in the status bar on the printer itself, it simply does not list the second set as being there. So there is nothing to choose or define. At one point, even though I didn't click to print, it seemed as if he was going to print something but then says there is more paper in the tray. But there was.

  I am on an iMac 10.8.5 OS and just bought this printer. I connected with ethernet.

  Hello

  I ask you to try the procedure described in the following link:

  http://support.HP.com/us-en/document/c03160525

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• After hdr pro, LR does not have lens correction correct.

  When I take pictures with my Canon ESF objective USM 15-85, LR4 acknowledges the lens and will be automatically correct. However, if I take several pictures with this lens, open to LR4 and transfer to CS5 hdr pro, when I transfer to LR4, LR4 does not list this lens as an option for the correction of the goal. I can the corrrect product hdr lens in CS5 before transfer back to LR. Which is the best solution, or I do something wrong in LR4? Should I lens correct each frame in LR4 before transfereing CS5 HDR Pro? Moreover, I had the same problem with LR3.

  DT

  The goal is not listed because you reimport a file (TIFF or PSD not RAW) which could have originated or been rendered with the incorrect correction.  Another example of this is that the choice of lens correction differ between CR2 and JPEG.

  I apply lens correction to HDR and panoramas before editing in CS5, but try to minimize other develop to ensure the consistency of the handover.  A relevant light bracket with panoramas, which might not be relevant to you and certainly are pedantic, strict accuracy try to avoid adjustments that are Adaptive image (in black LR4, white, highlight, shadow) to develop before yielding to the CS5 because the strength of the adjustment varies with the content of the image. that is the same setting of the cursor has a different effect in an image of sky dominated than on a dominated shadow image light.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• DVD burned in first pro cc does not fill the screen. Desire a 4:3 aspect ratio

  I use first pro cc. I burned a dvd several times, trying different presets. Every time the dvd never fills the screen. It does not lool like box (16 x 9) letters. There is space around the photo / video. Need quick assistance, project is already late. Thanks in advance.

  Theo Smith

  Have you used one of the mpeg-2 DVD presets?

  Which one?

  MPE or Premiere Pro?

  Please show a screenshot of your output settings.

• Satellite Pro A60 does not recognize the accept/DVDs blank

  My computer will not accept blank CD - R disc so I can burn data on them, but my computer will not accept blank DVD discs that I want to be able to use to store more data.

  In the drive of my computer D reads "DVD - RW", I guess so, but am not sure that this means that my pc should be usable with DVD-R and DVD - RW discs but it do not accepts / acknowledges these when I put a try to burn something on them.

  My computer also does not accept / recognize DVD + R Virgin discs as I have tried those, just in case they might work.

  Help please!

  Post edited by: EDS

  Hello

  Have you also tried to burn DVD-R discs?
  I had also some problems with DVD + R discs, so I changed to a DVD-R and since all works well! :)

  I don't use Windows Media Player to burn discs, I use CD Burner XP. It is a freeware tool, very small and fast. It works on most versions of Windows, and you should try it too!

  Also check the Toshiba page for an update of the firmware!