Printer not printer RED

Similar Questions

• Photosmart C & 180 will not print red

  The printer has suffered when we had a power cut and he was turned on.

  Since then, it will not print red. (I just get yellow).

  Have looked through the wire "Will not print Magenta", I'm not sure who, magenta cartridges (or both), I need to try hard - or if there are a few other adjustments that I do.

  Hello Phil1812,

  Please confirm the process you have already finished.

  Another process, you could try is as follows:

  (1) remove all ink cartridges.

  (2) close the ink access door.

  (3) disconnect the printer.

  (4) wait for about 30 seconds.

  (5) connect the printer.

  (6) a message indicating to load the cartridges should appear on the control panel.

  (7) reload cartridges.

  Kind regards

  Lynn_B

• Will not print red

  Hi, I own a number of hp photosmart premium c310 series: model {deleted personal information}: cn503a it will not print red. Have preformed obvious troubleshooting, other technical suggestions. Could not do stack or facing other alternatives with similar problem

  Did you also check to make sure that the printer firmware is up-to-date?
  I would like to do a manual cleaning the contacts on the cartridges, the printer and the print head next to ensure that this accumulation on these pieces is not the cause of the problem. Solution 4 this document here shows how to clean the contacts of the cartridge on the cartridges and the printer. The solution in this document here shows how to clean the print head. I know that the titles of the documents do not meet your specific question, but they are the steps to take to remove accumulation. If you have the print head of the machine, take a look at the printed on date while you clean the contacts that the date is in this part of the printhead. If this date is not passed, this is a replaceable part that can be troubleshoot-performed and replaced by contacting HP Total Care. If this date has passed, please post back with this date and I can give directions over here.

• Cannot print red

  Printer has stopped printing red. I have changed the cartridge, still does not red print. I went through all the cleaning, by aligning services public etc, no change. Now the printer began to print a diagnostic page after each normal page and I can't stop doing that! I just bought 3 new cartridges so really want to end up having to buy a new printer to solve the problem. It is a HP Office Jet Pro K5400n bought in 2008 and had worked well so far. HP tell me he's too old for their support.

  Also try manual cleaning print heads, without change.

  I put in a new magenta/cyan print head now and it has worked to correct problems - red prints again AND boring diagnosis page has ceased to be printed after each print.

• HP Deskjet 3070: I try to print red, but it comes out yellow

  Hello

  I have a HP Deskjet 3070 e-all-in-one - B611a. I was able to print correctly before of my HP Pavilion laptop to Windows 7 32-bit OS, but last week my printer started acting strange. When I try to print the text in red, it comes out yellow. When I try to print a purple variant, he leaves little green lifestyle. If I want to print Yellow, blue or black, it is printed correctly. I checked the ink cartridges, they have been placed correctly. I cleaned the print head, did not help. It seems as if my printer cannot print red more or the Red cartridge is somehow filled yellow ink... Can someone help me please?

  THX,

  Frederik

  It seems that the magenta ink is not printing correctly.  The steps in this troubleshooting page can help.  If they don't resolve the problem the message here can help.

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• not his (red mute button) after IDT installing on my laptop dv4-1435dx

  This is now my edges burn...

  I've had this laptop almost a year and since installing windows7, there is no sound coming out of this laptop.

  wrong to describe the problem:

  After you install the update for windows7 HP it installed the IDT audio codec, and after a reboot, the mute button became red and will not pass.

  After making back the IDT pilot button turned white, stayed like that and it has sound... but it does not turn red (although the audio sign on the trey turns off Cup-no)

  I updated my BIOS, installed all the drivers of quick launch button, the IDT pilot on the site of HP compatible to my laptop.

  can you help me please?

  OS: windows7 64 bit

  Hello

  Download, but not install it:
  IDT sound sp48668

  Disconnect from the Internet.
  Uninstalling your system IDT audio drivers.

  Resources:
  Uninstall software in Windows 7
  Uninstall or change a program in Windows 7

  Restart your system:
  At startup, press ' F8 ' and choose ' safe mode '.

  Reach:

  Panel-> Manager devices-> Audio, video and game controllers

  and find there sound card IDT. Click with the right button of your mouse and choose uninstall the driver.
  Reboot your system, and this time it starts normally.

  Install the audio driver that you have already downloaded.

• Designjet z5200 will not print red

  I use the z5200 for printing of banners, posters, and other major media print from photoshop.

  Red do not print correctly and is often replaced with colors salmon-ish or brown.

  Please notify

  No... print head only... ink was very well.

  #70 print head is yellow and magenta together.

• hpL7580 printer red ink does not print not EXCEPT when running diagnostics

  I have a hp L7580 and for the past 4 months red ink not print NOT either at all or only when you feel stroking in. I bought a new ink cartridge Magenta hp and I replaced 2 times the printhead with new heads of hp. Those dear people... come on hp! I have run many times diagnostics but also cleaned the printheads, printer-aligned and calibrated the line break. All these troubleshooting steps have been made several times that I have appendages. The Red (magenta) out of big beautiful even on tests, but to print anything just forget it. He's not here and it is getting old. Please help with something different and works if all goes well!

  [Moved from Community Participation]

  .. .come on hp!

  Hello

  1 have you tried reinstalling the drivers?

  2. check with HP support.

  http://WWW8.HP.com/us/en/support.html

  Don

• Epson printer does not print red color.

  Original title: I have a printer Epson SX110 Series. Troubel is that it will not print the coloar RED at all. All new cartridges, was working fine last night. Could you please help me.  Your JB

  I have an Epson SX110 Series printer. Troubel is that it will not print the coloar RED at all. All new cartridges, was working fine last night. Could you please help me.  Your JB

  Hello

  ·         You did changes to the computer before the show?

  ·         What application are you using to print?

  ·         What operating system is installed on your computer?

  Method 1: I suggest you follow the steps in the link to fix the problem:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can also try to download the latest driver on the Epson site and check if it helps:

  http://eSupport.Epson-Europe.com/CountrySelector.aspx?LNG=en-GB&data=emW65r3CP2FEFCEcZMfKegKdCohCVtGx

  Reference: & Support drivers: Epson Stylus SX110-known issue

  http://www.Epson.EU/nbsp/printers-and-all-in-ones/Epson-Stylus-SX110/drivers-support?target=article&Extn=.html&articleid=1334

  If the above mentioned methods does not help then contact Epson for assistance:

  http://www.Epson.com/cgi-bin/store/AboutContactUs.jsp

• HP ColorJet 2600n: HP ColorJet 2600n will not print RED

  I have all new 4 124 HP toners and HP124A (combo) installed at the same time, but the red color does not print. I had the same problem with the last 4 tones and thought the Magenta was BAD, and now with all new shades, the problem is still there. Help, please!

  The goal of the scanner is sprinkled on.  Here is a sheet of instructions with pictures on how to repair.  It will take some time but works perfectly when you are finished.

• 895cse will not print red or yellow

  Arrested 895Cse print any color (white). I put in new cartridge. Now, it will print blue but not red or yellow (again just empty). Black is fine.

  OK, a few things to check - I would start with the date on the cartridge as described in this document.  A few years ago, I ran across a major retailer who had long expired cartridges for sale, they probably would have questions right out of the box.

  Although it is possible, this could be caused by a printer hardware problem that is less likely, that all colors are driven by a single chip driver.  It woud not likely that two of the colors fail but cyan would still print as a result of the failure of the electronics.

  A way to check the cartridge would be as follows: remove the cartridge and gently pat dry the nozzles on a wet tissue.  A good cartridge would have strong cyan, magenta and yellow stripes.  If your cartridge only displays a task strong cyan, with a bit of magenta and yellow, then maybe it's the problem.

  If the task of cartridge shows not all colors there are a possible (but maybe temporary) solution.  Put a little folded paper towel in the bottom of a cup and drop of the cartridge on paper.  (That would be the same orientation that would be the cartridge in the printer).  Pour in hot water to a depth of about 1, 5-2 "and let the cartridge to soak for about ten minutes.  After soaking, remove the cartridge and gently dry the electric contacts with a fluffy - a coffee filter works well.  Replace the cartridge in the printer and try to print the page of diagnosis as described in this document.

• 6700 does not print red

  OfficeJet 6700. With the help of HP ink cartridges.

  Blue, yellow and black all print OK. However, the red color print as a kind of Brown.

  Replace the Magenta XL HP cartridge with a new one with the same result.

  I ran in the OfficeJet Wizard, the diagnosis the reports tab in the device information.

  Black, yellow and Cyan samples printed with the appropriate color. However, Magenta print as a purple muted with many horizontal stripes.

  I then ran the clean print heads.

  All the outputs black seemed clean and sharp. Color samples, with 3 shades of each color displayed in blue (ok), muted purple (all striated), Brown (méché) and green (ok).

  Running a third level cleaning produces a similar, but more streaked, results for the samples of violet and Brown.

  Replacement cartride Magenta leads to the same results.

  When I printed a page of my computer, red appeared as browns.

  The same programs running on the same computer with my previous printer HP DeskJet 970 worked.

  Is there some kind of color profile that must be loaded to correct this?

  My 6700 printer is around the age of 7 months and I never came across this problem in the past.

  Help, please!

  Since I have no answer on this forum, I called HP Support.

  After several tests, it was determined that the printer was defective.

  Since I was still under warranty, a replacement (reconstructed) printer has been sent.

  Now, everything's fine. Problem solved!

• HP Officejet Pro 8630: HP Officejet Pro 8630 - do not print red

  Hi, I'm very happy with the HP Officejet Pro 8630. I am registered to instant ink HP and going well. My problem is that my printer prints yellow instead of red. IE, write in red text is printed in yellow. It's the same thing if I print a web page for logo etc... sometimes Ribbon appears in green - checked ink - OK - alignment levels heads of fine - print - run calibration - ok all help much appreciated Marcus

  Hi, I have my leash on 24/7.

• New ink cartridge does not print red

  I replaced the ink cartridge and it won't print any red color, all other work

  Hello

  Contact the manufacturer of the printer