Printer not recognized by PC

Similar Questions

• printer not recognized

  Can anyone help please?

  I have a printer HP 2050 all-in-one J510 series which I was printing with my new laptop with Windows 8 success in plugging just USB. It is not installed as says not compatible with 8 disc. (my old pc has 7) I replaced a cartridge this morning and since then have not been able to print, it is not recognizing the printer.

  Any advice would be appreciated.

  You can try to run the HP Print & Scan Doctor program. (link)

  Link to install the driver.

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• J4580 printer not recognized by Windows 8

  Hi all, thank you very much in advance for the help.

  I tried to install HP Officejet J4580 Windows 8 64-bit, but its not recognized at all. Seesms that Windows does not recognize device correctly with the latest driver installed or uninstalled. The printer itself is work corretly (with the same cable on Fedora). I also tried HP tools for printers, but all ask me to connect the printer connected (as well as the isnatller).

  See you soon,.

  Ivan

  Well, I want you to go through the steps, I described above in my first set of instructions on how to uninstall/reinstall the printer.

  In addition to these steps, I will need to go to your C: drive and record programs and the programs (x 86) folder deletes files HP or Hewlett-Packard (assuming that the printer is the only device HP).

  Press on the R of Key + Windows which will bring up the run window. Type "%AppData%" and remove all HP / Hewlett-Packard records. Do the same for "programdata %."

  Reinstall the printer from the download that I linked.

  As a quick question, you upgrade to Win8 or it was installed?

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• problem scanning HP w / windows 7 - printer not recognized

  I can not the scanner in hp psc 2355 all in one for work or be recognized w / windows 7, the printer is not a problem.

  Have someone else and fix this?

  Thank you.

  Ray

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796879&CC=UK&DLC=en&LC=en&os=4062&Product=422000&sw_lang=

• HP P1005: HP printer not recognized computer

  PC is working with environment doamin... printer suddenly stop working and its display offline... once that his to connect to another computer with a doamin. printer works fine. What will be the problem? Once I had also the problem with the laptop... was not with the domain name...

  Thank you...

  You are probably connected to the printer via a USB cable, in which case the fact that the PC is in a domain is absolutely no impact on the problem.

  If the printer works on a PC but fails on another PC, the PC is a failure on a a driver problem.

  So I would recommend downloading the latest driver from hp.com, remove the existing driver, and then install the driver newly downloaded.

• Printer not recognized wireless

  Trying to add an additional printer wireless to wireless cisco just doesn't recognize. It appears in the control panel and works fine manually. Have two printers on the network and had the same problem with the printer new's replacement. Delete this printer and all of a sudden the cisco network acknowledged the second printer, which he has not done before.

  Also tried plugging the new printer on the router via an ethernet cable and appears as offline.

  Hello

  If the wireless printer connects to a router.

  Install the printer software on each computer that will use it and set it up through the interface of the software.

  Jack MVP-networking. EZLAN.NET

• 4400 HP printer not recognized

  I have had this printer for some time. Two days ago, I have finally enabled him to make the HP udates. Now my computer does not recognize my printer. Sigh!

  I have the Windows 7 operating system.

  Can I remove updates somehow, or... help it even once, somehow recognize it?

  Thanks in advance. Helen.

  Hello

  The best way will be to do a system restore to the date where the unit was working fine.

  System restore

• Printer not recognized by Windows 8

  Original title: panasonic KX - P1150 (PRINTER)

  Hello
  I HAVE THE PROBLEM NEXT.  MY LAPTOP TOSHIBA WINDOWS 8 CANNOT RECOGNIZE MY PANASONIC KX-P1150 PRINTER, AND IS THE SECOND PROBLEM I HAVE, I CAN NOT FIND DRIVERS FOR WINDOWS 8

  Hi Mary,

  I suggest you follow the troubleshooting methods listed in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  There are no drivers available for windows 8 at the manufacturer, therefore, you need to install the printer of the old version in compatibility mode. Download the driver to a different version of Windows from the link below and then install the driver in compatibility mode.

  Printer drivers and utilities

  http://Panasonic.NET/PCC/products/printer/download/p1150download.html#download1

  Follow the steps below to install the driver in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  If you're still having problems, you can contact the manufacturer at the link below.

  http://Panasonic.NET/PCC/support/printer/

  You can check the link below.

  To configure a printer

  http://Windows.Microsoft.com/en-in/Windows-8/install-a-printer

  Why Windows is not find my device?

   

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Write to us at the State of the question. We will help you to come.

• Not printing not recognized

  My HP C4385 is not printing anything but the test page.  I am running Windows 7, 64-bit with a wireless network.  The printer worked fine until a couple of months and am about to throw it out the window.  I can print without problem, wireless test page.  However, nothing will print.  I can choose the printer, print and it PC acts like it is printing but nothing happens, at all.  I tried to download and reinstall this patch for Windows 7, 64-bit, but when I try to run the update, I get an error message "this update does support not all readers of HP device you have on your PC.  You don't need this update of the software. »

  I installed a new router wireless a few months ago, but I'm fairly certain that I could print later.

  My laptop is a Toshiba P505 S8980.

  I connected the printer with the USB cable, and the same thing happens - no impression.  I'm really tired of having to send what I wan to print my husband and it then prints on his Kodak printer.

  Any help on this?

  I tried to uninstall the software, but it did not work.  I solved the problem.  I ran sfc/scannow and it found a some corrupted files that have been fixed.  Now, I can print without problem.

• Lexmark X 3350 printer not recognized Vista

  can someone help me get my computer to recognize my printer? even with the newer lexmark driver download, microsoft windows do allow me to print.

  http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X3350&ACTP=recommend&ID=DR9966&segment=download&UserLocale=en_AU&oslocale=en_US&locale=en

  Above is the link to download the driver for Vista 32 bit for you printer model.

  Uninstall/reinstall the printer according to the instructions of Lexmark.

  See you soon.

  Mick Murphy - Microsoft partner

• New mac - printer not recognized when I install it.

  Hello.

  I have a 'new' Mac Book, Mac OS X, version 10.6.7 and I try to install my regulatory model number of all-in-one series, S/N: CN69EGFOWW, HP Deskjet F380: SDGOB-0601. I still have the instalationscd. The instalation fine until I get to the Setup Wizard. Then he can't recognize my HP device (and it is connected to the computer :-). I use a USB port. I tried to restart the computer, but it does make a difference.

  Any body know why?

  Thank you!

  I thought of it on mine. I went into Preferences system for printer and here he acknowledged. I got the printer/scan works this way through.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Portege R700 Finger Print Reader suddenly not recognized OS

  Hello

  I've been looking for a solution

  My R700 on Win7 worked perfectly using the finger print scanner. At any given time without cause the
  hardware (fingerprint reader to log on) was not recognized by the operating system more.

  -J' tried to remove the software, reinstalled driver
  -updated it and so on resulting material was not found.
  -J' even deleted all the entries in the register - no go.

  -Finger Print genuine software starts, but only to give an error that the FP-reader is not present.

  Is there a way to remove the fingerprint stored manually by removing the manually.

  The equipment works according to the support. (The machine has been send)
  However I don't want to re-setup of the entire machine (it is a work laptop) just to make it work?

  Intro step by step to achieve this or advice?

  I couldn't find a description on how to manually remove fingerprints (cause I suspect this is the problem) from the software to do this does not start.

  Any input would be appreciated.

  Best regards
  Julian

  If you do not see material unresolved fingerprints or devices in Device Manager, then the device is either disabled in the BIOS or the fingerprint sensor is defective or too loose or there is a spill of liquid causing corrosion.