Printer Photosmart 310 has: no display

After owning my printer for 3 years, he is suddenly ceased to display the regular menu.  It shows only a blue circle with HP in the center of it.   In addition, it does not turn off.   I even tried the key in a few seconds, but it always turns.  I hesitate to disconnect it & plug it back because I'm afraid that it won't work at all.  It's still all printing I ask of it.  Any suggestions?

Hello

The best way to solve this problem is by having the agreement of power disconnected and reconnected it while holding down the power button.

Give Kudos to say 'thank you' by clicking on the "icon shots."

Click on 'accept as Solution' if it has solved your problem, while others may find it.

Although I am an employee of HP, I speak for myself and not for HP.

Tags: HP Printers

Similar Questions

  • Automatic duplex printing - Photosmart 310 has

    I have a new printer Photosmart Premium e-All-In-One C310a. In highlights eco told me, ' save the document of up to 50% with automatic duplexing.»

    Since I assumed this printer could do that, but I was not able to find out how.

    The seven-page document that comes with the printer isn't really a "user guide". Its more like a summary of features, very few 'how to' save for a step 4 put in place the process.

    The C310a has the ability to print two-sided documents automatically and if so, how?

    Thank you

    Hello Bobst,

    Regarding my info tells me the device supports automatich duplex printing, but needs a duplexor to do. Some models are sold with the already installed duplexor and some models are not. So in this case, you will need to buy a duplexor. TO see if you model has an installed duplexor check the back of the unit. If installed it should look at there is a black brick that comes out of the unit.  Click HERE for more info on this duplexor, its two-sided printing accessory.

  • HP Photosmart Premium 310 has: not be deleted from the queue at the end of print jobs.

    Printing problems with Photosmart Premium 310 has.  Last job have not removed from the queue of items to print, even if the work is completed.  I have to go to the screen that shows what is printing and delete the item that was printed before the next item in the queue will be printed.  Any suggestions to fix this?

    Hello @shumaung and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have problems printing speed.  I would like to help!

    I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

    Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

    I also run your Apple updates: OS x: Mac App Store apps and OS X update

    After the updates, I recommend reinstalling the

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Cartridges black vs black HP Photosmart 310 Photo has

    We just received our Photosmart 310 last night and it works very well, connected wireless to a Macbook Pro running the Snow Leopard was last updated. My question is about the use of black ink. We printed out several sheets of text and a few pictures of color falls asleep. The standard (Pentagon) to install ink cartridge is declining, but the black photo cartridge has not been used at all, insofar as the ink supply status reports. Why ink ordinary black used when the photo black is not? How is a control of the use of a type of black ink on the other?

    I saw the page 'How ink is used', but it does not address this issue. Thanks in advance for an overview of this!

    The black cartridge is used for the text and the dark area when printing graphics or photos on plain paper.  Apart from maintenance use as you have seen in the way the ink is used to page the photo cartridge will only be used when printing on photo paper.

  • printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

    Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

    Hello

    HP Photosmart 7345 is compatible with Windows 7.

    Download the drivers for your printer from the below mentioned link and check if it helps.

    http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997


    Contact HP support for further assistance.
    http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  • Yellow vertical line displayed on the touch screen of new printer Photosmart 7510.

    I have a vertical yellow line on the touch screen of my new printer Photosmart 7510.  The yellow line is part of the screen (pixels).  Install my printer on my XP Windows last night.  This is a new printer, right out of the box.

    This problem can be solved, or should I get a replacement?

    To help you better, if the printer is within the return period, you can contact the store you purchased at or if the printer is in warranty period for HP, you can contact HP phone support(1-800-474-6836) for a replacement.

  • Photosmart C4485: Page alignment printer Photosmart C4485

    Hi all patients).

    Briefly:

    Used my printer Photosmart C4485 almost a year without worries. My daughter has tried to replace the cartridges and print the alignment page. The book got stuck in the printer, the print alignment page was not completely finished.

    The printer was asked to place it inside for scanning, had no proper scanning alignment page and since then, I can't use the printer more.

    Does anyone have a suggestion about a fix?

    TIA,

    Vio

    PS: Don't have a friend with the same printer to ask it an alignment :-(page...

    Hi @Vio,

    Welcome to the HP Forums!

    I see that you are unable to print the alignment with your HP Photosmart c4485 printer page. I'm happy to help you!

    Please, try the procedure described in this guide, an "alignment failed" Error Message is displayed on the control paneland let me know what happens!

    Hope this guide to solve your problem and have a nice day!

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  • Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a

    I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet.  However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a.  If I click on devices and printers, it shows my device from the computer as requiring troubleshooting.  When I click on troubleshooting it signals that "Driver for Photosmart Prem 310 is not installed.  Install the latest version of the driver.  When I applied the fix, it indicates that the driver is not found.

    I tried to download the latest driver on the website of HP in various ways, finally to uninstall all HP software displayed in the Panel and then removing all the HP files remaining on my laptop.  I then ran PC Tools Registry Mechanic, disabled my anti-virus, restarted the computer software and reinstalled the complete C310a software on the HP site.  It ended without any problem, and after adding the printer to my list of printer, it is printed on a perfect test page.  However, Device Manager always reports the C310a driver is missing, but it cannot find a copy when it finds one.

    How can I convince the device manager that everything is going well (apparently)?

    apeace, I recommend you do as you did, uninstall the printer under programs and features but also by ensuring that this printer he is removed from the Manager of peripherals and devices and printers. Then after restarting the computer and by disabling the firewall, download the drivers and software for full adjustment and install them.

    You can also run this utility and see if that solves the problem automatically!

    http://goo.GL/u3jDE

    Let me know!

  • New black cartridge does not print - Photosmart 5510 all-in-One

    I replaced all my ink cartridges when they ran.  The black cartridge is printing not and cannot even print alignment test page to align my new cartridges.  They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges.  My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me.  I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved.  Someone help.  I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good.  Thank you

    Hello Cath,

    I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!

    At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.

    Here's the guide I recommend following step by step:

    A "alignment failed" Error Message appears on the printer

    * Tip - make sure that the printer is connected directly to the wall outlet.

    Please do not hesitate to post your results here and I will help you further if necessary.

    Take care

  • Installation Photosmart 309 has on Windows 7 64 bit

    When I try to install my Photosmart 309 has on Windows 7 64 bit on an iMac, PC partition, using the 13.0 installation disc, I get the following error messages:

    "This computer has no USB software necessary support to allow for the completion of an installation USB."

    "This computer doesn't have the necessary support of the USB hardware to allow for the completion of an installation USB."

    The same thing happens with the version 14.0.  If I just hook the printer without the installation disc, the drivers are installed and I get a few opportunities, but not the full capacity, for example, without the HP Solution Center.

    Strangely, I have a laptop MacBook Pro with a PC with Windows 7 32-bit partition and 309 installation disc has been installed successfully.

    Also, I was able to install it on two computers on the Mac OS side.

    Hi KenJ29

    Yes, I had the same problem too... it just kept installing the software and go round in circles telling me that I had no proper USB drivers.  It's a self-extracting .exe.

    So, in WIn 7, I downloaded a universal Extractor (freeware) (if you want to download live click on the Installer UniExtract; if you want to check the site for yourself before you download it, go to http://legroom.net/software/uniextract.)

    I downloaded the complete HP software - in my particular case, it is the file PS_AIO_06_C309g - m_Full_WIn_enu_140_175.exe, because I'm running a 32-bit version of Windows 7.  Looks like you already, but if you do not have to download software appropriate for your configuration.

    I extracted the file self-extracting .exe using the 3rd choice of radio button, (the choice of Setup installshield-no) and saved on a file easy to find on the desktop.

    The usbready.exe file must be in the file called "setup", down down the contents of this folder.  I just deleted, rather renamed, and the installation software has worked well.

    Yep, overall it's a good PITA bread... all for the love of the Intel USB, version 3.01 system check... Copyright 1998!  And if the hair on my iMac with USB devices... According to this little .exe file... they do not exist.

    Good luck.


  • Windows 7 driver for printer / photosmart premium

    I installed windows 7 on my hdx 16 and I need drivers for the printer / photosmart premium 309 c. Someone at - it a chance for the two to work together?

    Thank you

    Russ

    I downloaded version 13 and have tried to install/uninstall several times. This includes the removal of the printer devices and Device Manager. When I try to reinstall I usually get a fatal error during 'configuration', the last step. I can print to the printer and I can run most of the photo. The center of solution won't work, which is a key piece of software for this printer. Any ideas?

    I'm running Windows 7 Ultimate (not beta). This software is properly installed on virtual xp but I prefer to run from 7.

    Thank you

    Message edited by russ1 on 10/14/2009 12:15

  • A model of TV Sony KDL-32BX330 has somehow display the date or time? MENU button does not

    A model of TV Sony KDL-32BX330 has somehow display the date or time? The button MENU has no option to select or adjust the time or date... maybe a new firmware?

    Hello, manual,.

    There is no option to display the time and date of the TV Sony KDL 32BX330.

    We cannot comment on future firmware updates, nor can respond us if a product will not in the future it does not currently feature.

    If my post answered your question, please mark it as an "accepted Solution".

  • Photosmart 6525: auto efax print photosmart 6525

    Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

    The printer (Photosmart 6525) allow Eprint and connected.

    Appreciate any help,

    Frank

    Hi Frank,.

    Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

    Connect your user on eFax.com and change preferences as follows:

    • Sign in to your eFax account.

  • HP printer PhotoSmart problem please HELP

    My HP all in one printer C5100 series has not worked properly for a while now and it is driving me crazy. The printer turns on but only cycles with the black and white bar and the small symbol of hp on top. Nothing else. Also my computer says that my printer is not connected and that it is. How can I fix it? I use my printer a lot to help my daughter with school projects and that it is out of service IDK what to do. Help, please.

    Hi SConnell,

    If you are unable to solve the problem, I suggest call HP. 1-800-474-6836 for the Canada and the United States, or Contact HP worldwide.

    HP will likely be out of warranty for you options. They may even be able to offer you a job as a reduction on a newer model.

    Good luck.

  • Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

    Hello

    My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

    Now the solution Center can not find my printer on the LAN.

    • I can connect to the printer via its IP address and see all the information about the printer and scan
    • Printing and scanning doctor can find the printer
    • Windows can see the printer and print

    But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

    I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

    I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

    Any suggestions?

    Concerning

    Hello

    Published on the website of HP software seem to be evil and not one used for your printer.

    I have notified HP to get this fixed number

    Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

    Finally download and install the following software, it's good:

    http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

    See you soon,.

    Shlomi

Maybe you are looking for

  • Continuous message 'new device's now synchronization

    My systems are set up to do not store passwords, so I realize that I have to connect to Sync my Firefox v.39 session starts. So I do it every day and will receive an email indicating the 'new device' message. Is there a way to disable this? Thank you

  • can I put sad early 2015 macbook Air

    I have only 120 GB of storage on my mac and I would like to upgrade the DSS on this subject and I was wondering if I could replace it with a new one on eBay is the one I was thinking of getting http://www.ebay.com/itm/256GB-PCIe-SSD-Apple-MacBook-Air

  • HP officejet pro 8210: hp officejet pro 8210 - locking cartridge tab ink broken

    When you remove the black ink cartridge, I seem to have broken the small plastic tab in the bin to which the cartridge is inserted. Where can I get a replacement? I have no idea of the number or how to identify it.

  • U160 BIOS

    Hello! Please, can someone tell me, where I can download BIOS for U160? It has a whitelist and I used to connect 802 b/g/n card

  • Command and Conquer: Generals will not work

    Original title: Hello, I am trying to get my command and conquer Generals game to play, but he won't play I am running windows 7 ultimate. programs have problems with windows 7