Printer prints multiple Pages

When you print from the web, my printer (HP 8600 Office Pro) prints multiple pages with one or two lines instead of a page in its entirety.

Hi Richard,

Welcome to Microsoft Community forum.

  • What web browser do you use?

  • Have you checked the preview before printing before printing from the web?

  • Is the printer connected to the network?

  • Are you facing this problem when printing from Internet Explorer only, or is it with all the programs?

I suggest to check the number of copies in the printer settings, you can check the link below: choice of print options. http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

If the problem persists, I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps.

Solve printer problems

http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

You can also run the Tools of diagnosis of HP for Windows and check if it helps.

http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02073861

See also this link from HP support. http://www8.hp.com/us/en/support-search.html?tab=2#! & qryterm = HP + 8600 + Office + Pro & search_searchtype = s - 001

I hope this helps. If you need help with Windows, let us know and will be happy to help you.

Tags: Windows

Similar Questions

  • OfficeJet Pro 8000 prints multiple pages of the same document

    Info:

    HP Officejet Pro 8000 A809a

    Windows 7 Pro 64-bit

    Last driver and firmware from HP

    When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

    Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

    It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

  • Dell Inspiron 7520: Printer will not print multiple pages after upgrade to Windows 10

    I have upgraded to Windows 10 and now my HP printer will not print multiple pages. The printer is set to print documents from the spool. Thanks for any help!

    I uninstalled everything related to my HP printer (in the Device Manager: printers and print queues) and searched my computer for everything related to my HP printer and deleted stuff also. Then I reinstalled the drivers and software from the HP website. I have updated Java also (I have no idea how much this has to do with my impression). I have my printer is off and unplugged for one minute before Relighting. I restarted my computer and now it seems to be printing normally. Praise the LORD!

  • Cannot print multiple pages of works

    9.0 Windows using Windows Vista, I can not print multiple pages of any file Works with the command 'print' in the 'folder '.  I checked the solution center but found no help.  The manufacturer of the computer/printer says it's a problem of application (e.g. Microsoft) and they can help.  Can you HELP me?

    After a uninstall and reinstall the complete software, I can print several pages ONCE.  All attempts after which fail - this is why an application... problem apparently.

    The Windows 7 upgrade would solve this problem?

    The upgrade of operating systems does not normally solve problems, especially as you say that it is a problem of work.

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

    Discussions in microsoft.public.works.win

    They will help you with your question of work in the work above Newsgroup.

    See you soon.

    Mick Murphy - Microsoft partner

  • Printing too low with the exception of the first and the last page when you print multiple pages documents.

    Original title: Question of impression

    It is a new problem; I printed documents several pages in the past without problem. When you print multiple pages on my Office Jet 8000, first & last pages are not bad, but the Middle pages are too weak to read. I initially set for last page of print jobs.   Test pages are fine. I am using genuine HP 940 X cartridges.  I print only 'black '.

    M.

    You should contact HP since it is certainly a printer problem.  We support the MS software & hardware here.

  • printing multiple pages

    Hello

    Adobe Reader to. 10.1.2

    I chose the option - print multiple pages on a single sheet of paper - which worked well.

    Now, I want this function - a page to a sheet of RESET.

    How to do this?

    I do not see a "reset" parameter - use several, minimum of 2 pages (and not 1 page) so is...

    Thank you and best regards

    Peter Rasmussen

    Press the size button.

  • Printing multiple pages to a TIFF file multiple using Windows Photo Viewer

    Original title: printing problem with a tiff file

    Hi guys

    How can I print 2 or 3 leaves only out of 68 pages in TIFF file when I open with 'Window Photo viewer'?

    When press "print", it appear just 'paper size', 'quality' and 'paper' only!

    Please kindly teach me to turned the pages I need.

    Waiting for your reply or response!

    Hello

    You did not mention the version of the operating system that is running in the computer with the problem. We know the version of operating system on this computer.

    Windows Photo Viewer application allows you to view multi-page TIFF files, but it does not allow to print a number of pages in a multi-page TIFF file. In order to achieve this functionality, you can have a look at the workaround solutions provided in the answerin the following threads:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-and-multi-page-TIFF-document/b5cf2c8d-d4a0-49f8-A674-fdc6b3d200c1

    (Note: in the link above, a third-party program is proposed as a workaround.) Please keep in mind that using a non-Microsoft program is at risk of the user and for all the problems arising from the use of these programs, the user must contact the manufacturer of the respective program)

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-How-do-i-print-only-selected-pages-in-a/9b0d846c-C765-E011-8dfc-68b599b31bf5

    I'm not one of these workarounds should help you. If you still need help on the question or with Windows, get back with more details and we will be happy to be of assistance.

  • DeskJet 2514: printing multiple pages

    Hello...

    If I need to print several copies of a document on my deskjet 2514 I need to print one at a time, otherwise it will keep printing the page over and over - example: if I select 4 copies it will print 4 then continue printing page after page, unless I have turn off the printer.

    is there any solution for this?

    Thank you!

    Lynn

    Hi @lynseyB!

    Welcome to the community of HP.

    I understand that you are experiencing a problem, make multiple copies of the front of the all-in-one printer HP Deskjet 2514. I want to help you find a solution to this problem.

    You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

    In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
    ↑ This is not limited to the Laserjet printers.

    Please get back to me and make me know if this solved your problem.

  • Print multiple pages per sheet with 'Adobe PDF' printer

    Hello

    at my University, I got the PowerPoint-leaves as a PDF document, where the leaves are in format landscape. Now, I want to print them. I want to print two of these pages in landscape on a sheet in portrait format.

    Because I couldn't find any other way to do it, I chose 'Adobe PDF' printer and in "management" - options "Multiple pages per sheet" Page The result is correct, what I want, but there's a big problem:

    Some characters are replaced with a white box with black border. Like this, it is impossible to read the content. I added a screenshot for better understanding.

    I printed as picture, but it doesn't look good because it is very grainy.

    Do you have suggestions for solutions? Thank you very much!

    I use Acrobat Pro X (10.1.1) on a Win 7 Professional system.

    Greetings

    Franz

    Adobe PDF Print error.JPG

    I'm sorry for my bad English...

    Thank you! I tried a lot of font settings. Finally, I changed the download settings for fonts PostScript "at the beginning" 'for each page.

  • Print multiple pages on one sheet

    I use Adobe Reader and you want to print two copies of the same document on the same sheet. It does not allow me to do that no matter the settings, I put in the print dialog box or the printer driver. I said "up to 2" and the paper size is 18 x 12, the document itself is 8.5 x 11, so there should be plenty of room. Can someone point me in the right direction?

    Thank you

    Mark

    According to my understanding of your problem, you have a PDF of a page, and you need to print 100 copies of the same page by page, scaling of multiple Pages per sheet.

    If this is the problem then cannot this using a combination of Copies and multiple Pages per sheet function.

  • HP officejet 7500 has problem printing multiple pages

    JO 7500 a, on home wireless network, only prints 2 pages of a document and then stops and 'error', said

    (W8.1)

    Hello AndrewCorser,

    Thank you for your updated answer. Please follow these troubleshooting steps in order:

    Uninstall your software on the computer. I'll give you a document from HP on software control panel uninstall. (Unplug the USB cable from your computer.)

    Then, please disable all programs that run in the background: (this information has been said here.)

    1. Press simultaneously the Windows and R. In the run box, type msconfig, and click OK .
    2. In the System Configuration window, click the option next to Selective startup , and then click the box next to Load Startup items to remove the check mark.
  • Printing multiple pages on one large page

    I have a document with several pages. The dimensions of these pages are in. 25 "wide x 44" in. high. Our cutting machine operator said that the machine works best with a long roll of material, so it can be feed cutter, instead of printing each page at a time. My question to you all is, somehow know Indesign to print all my pages continuously without the printer cut each page after printing? I read something about the pictures, but I like to keep my 100% pages in size. I would also avoid having a document with dimensions as 25 "in. wide by 150 ft. Any help would be much appreciated.

    This should be a driver configuration, I think.

  • Printing multiple pages; going too fast and jams

    I have a HP 1200 laser printer and want to print 85 double-sided copies, printing page 1 and then put back copies through to page 2. The problem is that the printer goes too fast and jams of all other pages or two. I can't think of anyway to slow it down, or any other reason for the jam. It works fine on small jobs.

    Thanks for the information. I checked the "components", and they seem to be OK. I suspect that the problem may be the quality of the paper (dried, perhaps). I'll mark this as resolved.

  • Why print multiple pages per sheet reduce the image?

    Two pages of 5.5x8.5 must print 2-up on 8.5 x 11 WITHOUT reducing the size of the image. Taxation of basic page! (I'm talking about Acrobat DC, specifically.)

    The answer is very simple.

    Acrobat does not currently a tool of imposition of real page. How Acrobat reduced the size of the pages has to do with areas conscious as defined by the printer driver and therefore, even if you try to make a booklet of 5.5x8 pages on paper 8.5 x 11, Acrobat reduced the size of the pages to accommodate the unprintable margins.

    There are third party for Acrobat plugins that perform this and much more sophisticated tax functions.

    -Dov

  • The JavaScript Code to print multiple Page ranges in Acrobat

    Hi all

    I am very new to Javascript (used for the first time this morning) and was looking for help.

    I built a pdf file in Acrobat that I need to print on a very regular basis.

    However, when I print, there are only some of the pages I need to print as opposed to the entire document.

    I put in a print button that executes code when you press on below:

    This.Print (true, 1, 25);

    This.Print (true, 27, 28);

    This allows me to print two different page ranges, but it separates into two different print jobs.

    Y at - it a code that will allow me to put them in the same print job, so that it selects the pages 1-25, 27 and 28, rather than have them separately?

    I am currently using Adobe Acrobat X Standard.

    Any input would be much appreciated.

    Thank you!

    Acrobat/Reader 11 allows you to use the printRange property of PrintParams object that is used with the print statement: http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/JS_API_AcroJS.89.1013.html

    See the sample code included in the link above.

Maybe you are looking for