Printer problem after Windows XP updates on 06122013

Title updates: Windows XP original on 06122013

Updates of Windows XP on 06122013 seemed to make me lose contact with printer HP LJ1200 and had to perform the restoration of the system to 06112013 do work again. The printer is set up as a parallel device, running on Port DOT4_001 (according to article of Port in the properties of the printer) and was removed in the LPT1 Device Manager and computer rebooted and reloaded LPT1.
Tracking the whole Troubleshooting MS system under properties and nothing seemed to allow printing, so I restored the machine on the eve. Now the printer works.

Computer is a Xeon E1395 of double a ASUS PC - DL Deluxe Intel

Everyone still faces a problem of printing with the new updates?

Hi Michael,

I see you got a problem with printer HP LJ1200 after installation of updates recently offered from Windows update.

What exactly happened when you were trying to print after the recent updates? Have you received an error message?

Thanks for the sharing of information when you perform a restore as solved the problem.

This issue would have occurred as a result of updates related to the printer or the additional updates to the hardware device connected to the computer. Sometimes, when these problems occur after Windows update, we should always check the specific updates that have been installed right before the problem occurred. In this way, we can identify the update that caused the problem.

As the problem does not persist now, I suggest you to download and manually install the updates individually to determine the exact cause of the problem.

Please let us know if you need help on this question.

Tags: Windows

Similar Questions

  • Problems after Windows 8 update.

    I left my machine to update and turn off after my last session on the laptop.  I turned on it today to find out I lost all my tiles and had to start again with Outlook and other programs.  It seems that my laptop was cleaned.  I lost all my files on the hard drive.  Everyone found this problem and someone at - it a solution that I can get all my files back?

    Try to open your file Explorer and will this PC (computer) > Local disk c > users > Barbara and see if your files are there.

  • 10 Windows compatible printers: printer problems after the upgrade to Windows 10

    If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

    If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

    • Cannot print after upgrading
    • Cannot parse after upgrade
    • Printer software installation & screen opens instead of HP printer Assistant
    • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
    • Multiple display of printer in the HP printer Assistant names
    • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
    • "Access denied" error change HP Solution Center print settings
    • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
    • Fax device are not not in the devices and printers connected to a USB printer
    • HP Printer Wizard does not open with a USB connected printer
    • HP Smart printing does not open in Internet Explorer
    • "Error-2081883401' poster during the uninstall of the printer driver.

    In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

    Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

  • Connection WiFi failure: my WiFi account disappear AFTER WINDOW 8 update in March 2014.

    My notebook" ASUS S550C series" experienced WiFi problem after the recent updates of window 8 auto: "

    -Existing my WiFi adapter: "Atheros AR7015 Wireless Network Adapter".

    -WiFi is not displayed on the list of WiFi more

    - so not able to connect to internet on my laptop via WiFi

    -for my other devices (mobile phones, printer) could not connect to internet via WiFi

    Please, share and advise solutions by steps.

    My notebook" ASUS S550C series" experienced WiFi problem after the recent updates of window 8 auto: "

    -Existing my WiFi adapter: "Atheros AR7015 Wireless Network Adapter".

    -WiFi is not displayed on the list of WiFi more

    - so not able to connect to internet on my laptop via WiFi

    -for my other devices (mobile phones, printer) could not connect to internet via WiFi

    Please, share and advise solutions by steps.

    Dear teammates from MICROSOFT Technical support,

    Problem: My adapter WiFi and TP LINK router N existing (TL-WR940N) COULD NOT catch up with updates of Windows 8.

    To make my ASUS existing NOT PU detect/locate the mentioned router device.

    Solution: After harassing on the updates for TP LINK router, my WiFi is back on as usual.

    Suggestion: Windows 8 to consider this issue before the next update.

    Thanks in advance.

    Steps to follow:

    -Connection: get the cable instead of another wireless connection

    -Internet: go to website of TP LINK to the technical support page:

    www.TP-Link.com/en/support/Download/?PCID=201&Model=TL-WR940N&version=All

    -Download upgrade options:

    TL-WR940N V2 (300Mbps Wireless N Router) or

    TL-WR940N V1 (300Mbps Wireless N Router)

    -Download Asus

    -Extract the downloaded files

    -Stop ASUS

    -Connection: Disconnect the connection cable, this cable router device transfer

    S ' properly fed & plugged: Modem, router TP Link Wireless N & TP Link wireless

    adapter (plug on ASUS USB)

    -Restart ASUS

    -Check: Control Panel/option/wifi internet connection

    -Check: signal from the modem, adapter TP LINK signal (needs FLASH)

    -Check;  the WiFi connection is on

    -Internet: go to any site to begin to take advantage of internet surfing

    IT TAKES TIME AND SO BE PATIENT!

    I HOPE MY SHARING TO HELP YOU IF YOU ENCOUNTER THE SAME PROBLEM, GOOD LUCK!

    P.S. hoping that Microsoft will have this failure WiFi into serious consideration before the next updates

    to help us avoid these hassles!

    Tips: it is most efficient and convenient, I found.

    try other suggestions to update firmware on 192.168.0.1/192.168.1.1.

    but it's laborious! more than ever successfully logined to check code of firware TP LINK!

  • Print problems with the recent update to Version 10.11.5

    Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

    Roger 510 wrote:

    Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

    Have you checked with Epson for an updated printer driver?

  • Blue screen after windows xp update...

    I got the blue screen now well documented after windows xp update. I'm away on business and so unable to make my records at home. My question is without the disk is there a way I can fix it the laptop? Microsoft took 3 days to order discs and now tell me it might take 7 to 10 days so that they arrive. Not really customer service.

    Anyone has any ideas, is there something that you can download? or is there a fix on the Web site?

    Thank you

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    =================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

    original title: problems with Windows VISTA update

    I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

    1. 9 47 code
    2. Code 800070002
    3. Code D 80024200.

    Is there a resolution to do the same thing?

    Hello

    Did you change your computer?

    I suggest you to follow the methods and check.

    Method 1:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Method 3:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

    As above. I checked the USB port and it is connected.

    Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

    Hello

    1. you receive an error message/code when you try to print?

    2. What is the serial number and model of the printer?
     
    Follow the steps.
     
    Method 1
    Run the hardware and devices Troubleshooter
    This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Also run convenience store Print that would help us diagnose the problem better
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Method 2

    (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

    (b) connect the printer to a different USB port and check if it helps.

    (c) check the on another computer.

    Method 3

    Run the fix - it tool from the link.

    Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

    Method 4
    If the previous step fails, follow the steps described in the following link:
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
     
     
    Let us know if it helps.

  • Printer problem on Windows 'margins are too small.

    Original title: I'll "ask" as I don't know where to find "answers":

    I am sure that the isI will "ask" that I don't know where to find "answers": when I compose using Word, something to copy and paste it on a blank page or click here to print I get a message that my margins are too small - I really want ot print.  I always click Yes, but the document goes into a queue.  When I explore a reason for the 'unprintable', it's always "a document in the queue has hampered the printing process.  I have delete or cancel the docs one both attempt to determine the doc at fault, but I can never start the printing process.  CAN SOMEONE HELP ME SOON? a simple question for most people, but not for me.   I'll be very grateful for a fix.

    Hi Gunnar,

    1. is the issue limited only when printing word documents access?

    2. what happens when you try to print a test page?

    I suggest you to change the margin of Word and check if it helps.

    Change page margins

    If you are unable to print from any document, try the following methods and check if it helps.

    Method 1:

    Run the printer Troubleshooter and check if that helps.

    Open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

    Method 2:

     

    Restart the print spooler device

    a. click Start, select Control Paneland then click on Administrative Tools.

    b. double-click on Services.

    c. in the user account control window, click on continue.

    d. click on print spooler.

    e. click stop to stop the print spooler.

    f. click Start to restart the print spooler.

    g. click on OK.

    h. restart the computer and check if it helps.

    Method 3:

    Clear the printer files.

    a. click on Start Menu, in the online search, type services.msc and press ENTER. b. the Services listed, stop the print spooler service. (c) in Windows Explorer, navigate to the folder below and open the PRINTERS. C:\Windows\system32\spool\PRINTERS d.     Click on continue or Yes (if prompted by UAC) to approve the opening of the PRINTERS folder. e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer. Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content. f. open Services, and then start the print spooler service.

    Refer to the steps in the following Microsoft article:

    Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows 

    Keep us informed on the status of the issue.

  • Printing problems after the installation of Windows Live Essentials update

    I am running Windows Vista 64 Home Premium version and had been successfully using an all-in-one HP PSC 2355 printer until yesterday, I installed Windows Live Essentials. Photos, in particular, never get to the file printing.  The TEst Page from Windows printer shows printer is installed correctly. Have tried to reset the printer (unplugging / plugging) without success. Have not found new drivers for the printer.  What should I check before I agree to replace the printer?

    Thanks for your suggestions.   I uninstalled WLE and my printing problems seem to be resolved.  Not really sure how useful WLE was and I received the long ok without it.

  • Windows 7 - problems after Windows updates

    When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

    Have you tried running the resolution of Internet connection problems after these updates?

    Click Start, type: Troubleshooting

    Press enter on your keyboard

    Do a search for Internet connection

    Double-click the Internet connection problems and follow the wizard to display on.

    Using Windows - Management, configuration, and troubleshooting updates
    http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Problems after Windows Update on Vista wireless

    It seems that other people have a similar problem, but I'll post this new...
    I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

    I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

    Hi dabaum77,

    From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

     
    Access the link below
    Follow these steps to disable the automatic updates:
     
    1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
    2. in the left pane, click on change settings.
    3. under important updates, choose the option you want.
    4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

    You can also check the update problem in Windows Update history.
     
    Follow the steps to check which day caused the issue:
     
    1. open the control panel (all items view), and click the Windows Update icon.
       
    2. click on the link to view update history.
      
    3. to view the details of a single Windows Update-
    (A) select and right-click on a Windows Update list, and then click details.

    (B) click on close when finished.
     
     
    You can also uninstall the update that is causing the problem to occur, although it is not recommended.
     
    1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
     

    2. in the programs and features, click the link updates installed.
     

     
    3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
     

     
    4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
     

     
    5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
     


    6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
     

    Aziz Nadeem - Microsoft Support
  • Problems after Windows update.

    A rift developed with our computer after an automatic update sometime in the last 3 weeks and installing windows explorer 8. Often the screen turns blue and displays the message "Kernel_stac_ inpage_error". Since the update and installation of windows explorer 8 the computer starts and stops is very slow. After the white screen, the computer automatically runs a disc consistency check.

    1 uninstall whatever it is named NORTON as well as LiveUpdate via Add/Remove programs.

    2. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    3. close all open applications (that is, anything with an icon on the taskbar).

    4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart & test.

  • Inspiron 7000 (7537) problems after Windows 8.1 update

    I have my laptop set updated to 8.1 and I found 2 numbers to date:

    1 - my wrath of monitor off after 30 minutes when it is plugged in, but back on. That has happened twice and had to force close down. (laptop wasn't on sleep)

    2 keyboard and touchpad"could not start" after windows starts, so I got back the password using the screen keyboard and restarted windows.

    - - - - - - - - -

    UPDATE!     24/11/2013

    seems that Intel has finally resolved the issue, released driver 3345.

    go to system Intel detect the site and to detect your system for updates: http://www.intel.com/p/en_US/support/detect

    This update has many bugs and most importantly: fixed black screen that occur during the recovery of an automatic monitor off scenario.

    fixed link: http://downloadmirror.intel.com/23405/eng/ReleaseNotes_GFX_3345_64.pdf

    UPDATE!

    seems that Intel has finally resolved the issue, released driver 3345.

    go to system Intel detect the site and to detect your system for updates: http://www.intel.com/p/en_US/support/detect

    This update has many bugs and most importantly: fixed black screen that occur during the recovery of an automatic monitor off scenario.

    fixed link: http://downloadmirror.intel.com/23405/eng/ReleaseNotes_GFX_3345_64.pdf

  • HP ENVY 15 l: I have a lot of problems after windows 10

    Hello

    I have a lot of problems after the update of Windows 10

    1 - what sleep mode the screen is not working! (I already tried to change the keyboard, but to no avail)
    2. the footprint does not work after the update!
    3 programs Microsoft Office cannot be installed after purchase! (Whenever you download the package, I get an error message)
    4 - when I walked in the updates (windows) tells me that there is an error message!

    Windows 10 home unique Language، (error)

    ....
    Please help me as soon as possible! I have a cousin reviews

    Hello @shySmile,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I came across your post about the problems associated with Windows 10 and wanted to help!

    For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

    How can I find my model number or product number?

    Try to see the next post to solve the problem of the Standby Mode. and let me know how it goes:

    How to troubleshoot upgrade Post-Windows 10 on HP laptops

    Can you give us more information about the print does not work after the update?  For your problem regarding the purchase of Microsoft Office, contact Microsoft Product Support.  To solve the problem with the update of Windows, try using the following tool found here:

    Open the Windows Update troubleshooting tool

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

Maybe you are looking for

  • AT200 - slow network after update 4.0.3

    Hi all Since the last update 4.0.3 my Wifi network is very slow.Hard Reset solves the problem. I try Fixer Wifi from the Android Market application, is better but reseting Wiff network every 5 minutes. It seems that the problem is also known on other

  • Number of records between two dates which lasted more than a minute

    I need to count the number of events/records in a single table with the dates of appointment and for how long the appointments in another table, I have two cells to hold dated (start and end dates) give a range. I want to count the number of appointm

  • Generate a report and save it as a PDF

    Hi all Attachment VI I work on.,. Here I am trying to generate a report by adding the chart picture in it and save the report in pdf format. But I coudnt able to save it as a pdf. In the path dialog box, even if I give the file name as. PDF, still i

  • How to install spell check outlook express?

    How to get the spell checker in my outlook as re installed windows xp exspres

  • Trying to recover deleted files offline

    Hello I have a Windows 7 domain computer that had the Folder Redirection on the my documents and desktop folders. It is a portable computer that uses offline files also. It turns out that for some reason any synchronization to the server has stopped