Printer PSC 1410

Similar Questions

• Windows 7 includes drivers for HP PSC 1410 all-in-one?

  I am about to replace my Office Tower (currently Windows XP) for one, with Windows 7 pro is installed.  I don't have a disk for the drivers for my printer PSC 1410 All-in-one.  Are they included in Windows 7 where can I download the free after plugging in the new Tower?

  Hello

  You can download the drivers from the followung link:

  Be sure you do not connect USB until the installation invites you to do so.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=441115&sw_lang=

• PSC 1410: Prints all files

  Some correct files is printed and some files the printer will go through the motions of printing but blank paper comes out like the finished product and some files will display "grey box" parts of a document.

  Hi @Rich_H79,

  Thank you for accepting the HP Forums, I'd love to help you with your PSC 1410. If I understand your description that the printer will print as expected some programs, but when printing from other printer just goes through the motions and ejects a blank page. Could you provide me with a list of programs that you can print from a list that you can not. Maybe I can identify what the programs you cannot print to have in common.

  While I wait for you, please complete the options presented in the following document, as it may also help to isolate the problem and point us in the right direction: HP PSC 1400 Series all-in-One - missing, faded or dull colors.

  I hope that help. If the document that I suggested to resolve the issue please click Accept as Solution button below so that others may see your problem is solved.

  Thanks, I look forward to hearing back on your part.

• HP PSC 1410, Q7286A: Printer does not work

  Hello dear HP support, I found my old printer bought all the cables and cartridges, hung and downloaded the software for win7, but it does not work, scaner works very well, as the copy, but does not print not why so? and is it possible to install it manually? because there are in the list of printers series psc 1500 and 1600 series but not 1400 series.

  Hope for a quick response. Thank you

  Hello arturs143,

  Welcome to the HP Forums.

  I see you are trying to use your Psc 1410.

  If you have not already, please throw a document on the scanner glass and try to make a copy.  If the copy works, we would be able to get the printer installed on your computer and try some impression.  If the copy does not work, we will need troubleshooting of the printer.

  Please write to me at the time when you have the time with copy of test results.

  Thanks for your time.

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• Printer HP LaserJet PSC 1410

  The LaserJet HP PSC 1410 printer does not print, the notice of the sale, the printer has the door open to the examination of the complaint, but this could have no bottom of the open door, someone familiar with this error and its solution?

  Hello

  • How long you have been facing this problem?
  • If it works well before?
  • What were the changes made before the problem occurred?
  • Have you received an error message?

  You can follow the links that may help you solve your problem below:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=Tab03

• Where to find an IP for hp psc 1410 printer all in one

  Hello.

  Anyone know where to find an ip address for hp psc 1410, printer all-in-one?

  Make sure you have the latest version of Adobe Flash installed.

  Adobe Flash

  Download the latest version of the software for your printer on the link below and save it to your desktop

  FTP://ftp.HP.com/pub/softlib/software10/COL11786/MP-35363-2/CDB-AmericasEuro1-Express_NB.exe

  Then download revo uninstaller on the link below and install it.

  http://www.revouninstaller.com/download-freeware-version.php

  Unplug the printer from the PC.

  Revo and see if he can find any installed printer HP software.  If so, right-click the icon of the software and choose uninstall.  During the process you may be asked to remove the registry entries.  If you are, just select and click on delete.  Do the same for any left over files and folders.  When finished, restart the PC.

  Disable any Antivirus and Antispyware software.

  Now, double-click the installer on your desktop to start the installation, the connection of the printer when you are asked.

  I hope this helps.

  Best wishes

  DP - K

• No scanning with hp PSC 1410 printer and a Mac

  I used an all-in-one hp PSC 1410 with a PC running Windows XP and everything worked fine.  Now, I had to connect it to a Mac and I can't use the scan function.  I think that the driver is installed in my Mac does not include the scan function.  I looked for a driver on the hp site and everything I found was drivers with all functions only for Mac OS X 10.6.  My Mac is Mac OS 10.5.8.  Where can I download a driver that includes the function of scan to my Mac?  Or do I have to by another hp all-in-one?

  Have you tried this?

• HP PSC 1410

  Witam. Porszę o pomoc: Mam Windows XP 32-bit (Media Center Edition 2005), zainstalowałem drukarkę, a need zainstalować scaner.  Need driver "hp gwiaund". NIE mogę użyć oryginalnego od CD drukarki, ponieważ nie przechodzi zgodności z Windows testow I błąd wurzuca "Nie można wykonać żądania reason błędu urządzenia z we / wy ' Didic

  ZIBI wrote:

  Witam. Porszę o pomoc: Mam Windows XP 32-bit (Media Center Edition 2005), zainstalowałem drukarkę, a need zainstalować scaner.  Need driver "hp gwiaund". NIE mogę użyć oryginalnego od CD drukarki, ponieważ nie przechodzi zgodności z Windows testow I błąd wurzuca "Nie można wykonać żądania reason błędu urządzenia z we / wy ' Didic

  [Translation] Welcome. Porszę for help: I have Windows 32-bit XP (Media Center Edition 2005), I have installed the printer, and I need to install the scaner. I need a driver "hp gwiaund". "I can't use the original printer CD, because it does not pass the test and wurzuca Windows Logo error" could not complete your request because of an error I / O devices " Didic

  [Please post in English in this forum.]  You can download the complete driver recommended PSC 1410 for HP here.

• Install HP PSC 1410 on Mac

  Hello

  I recently bought a mac and I can't seem to install my hp psc 1410. My dell recently broke down that's why I need to install it on my mac. I went through the HP support page to get a driver but there is nothing for me to download but when I try to add the printer it says I need to contact HP for the software. My mac is running on Mac OS X 10.9.2 Please help! Thank you.

  Hi sweetferry,

  Welcome to the HP forums!

  I see that you have a PSC 1410 and are having problems to install on your Mac under OS X 10.9. I'm sorry to hear that, but I will certainly do my best to help you!

  It is possible that the last update of the OS driver in was still did not, so I will propose that you start with the execution of your Apple updates. If once you run those, you get the same message, please download and run the update manually by clicking here.  Once this is done, you should be able to add the printer and use via the Apple software.

  I would like to know how it goes for you!

• Center of HP PSC 1410 XP Solution

  I have recently re built my PC with a new SSD and have got to the stage where I need to re - load drivers HP & Solution Center HP for my PSC 1410. I am running Windows XP - SP3.

  I have the drivers for the printer impression but cannot find the software for the HP Solution Center, without which I can't scan or photo copy etc.
  Any suggestions someone please?

  Hi Waterboy 71,

  Yes, it worked!

  I downloaded the ' PEH-AmericasEuro1 - Express_NB.exe' according to the link you kindly sent, installed and all the familiar functionality again got back to my trusty ol' PSC1410 '.

  Thank you very much for your support and your help.

• PSC 1410: PSC 1410 permanently into suspended mode, on Windows 7, 32-bit

  Hello

  Our printer was fine a week ago. Now when you start a print job Word on our laptop Win 7 (32 bit) of 2010, the task starts ever, and the printer status window describes the printer "pause".

  After the cancellation of print jobs, restarting the laptop and printer, we always get the same message "Paused" at the launch of print jobs.

  When I open the HP solution, next to the picture of the printer Center is a brilliant green check icon, and a clickable blue message saying printer is ready.

  The printer works fine printing Open Office docs from another laptop, with Win 8.

  Any ideas?  I couldn't find this problem in the forum...

  Thank you very much!

  Hi @Phil_Latam,

  I'd love to help you with your PSC 1410. I understand that you are unable to print because the printer is in a paused state. Performing printing and Scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Thanks, I look forward to hearing back on your part.

• HP PSC 1410 on windows 8.1

  I am trying to install Hp PSC 1410 8.1 on windows but it does not work. WHY?

  HP b110 works on windows 8.1?

  Hi Marc,

  Iwould propose uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Please let me know how it goes.

• HP psc 1410 could not set up the wireless network

  I have a hp psc 1410, a desk, a laptop and a modem router combo and I'm trying to do it to where I can print to the wireless laptop, I read stuff online but can't seem to make it work. Help, please

  Oh, a USB to Ethernet Converter is not likely to work.  If so, your router or your ISP should tell you how to do this job.

  I'm sorry.

• Not to install the drivers for HP PSC 1410 on computer running Win 7 Ultimate (64 bit)

  Hi all!

  I have been with my HP PSC 1410 with my old computer for a while now, without any problems. However, since the time I upgraded my computer and the operating system (Win 7 Ultimate (64 bit) recently, I find that, although the printer prints my documents and scan them in a certain measure, there is always an exclamation point icon that appears on the device, indicating that it does not work as it is supposed to. I tried to download driver from the HP site files, but the problem won't go away. Any suggestions, anyone?

  Have you installed the printer according to the instructions from HP, which is to install using the cd of HP, or the full software from HP support features and only connect the printer when prompted, or just connect?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=UK&DLC=en&sw_lang=&product=441115#n195