Printer re - install - Scan does not work

Similar Questions

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Smart printing is installed but does not work

  House smart printing using Windows XP with IE7 is installed with the Bing toolbar.  I don't get any errors, but the selection change or allow me to select the element to clip.

  Hi, I see that you made this post some time ago, but no one answered, the problem is now resolved?

• HP Scanjet 5590: Scanjet 5590 & Win10 64-bit - install and scanning does not work

  1 install the latest official software for Scanjet 5590 stops in the Middle after the first component (software scanjet 5590) before TWAIN / Iris etc. Macromedia window remains opent "Please wait" but the 2nd part of the installation process does not start.

  2. no doubt as a result no scanninng. Before the scanner buttons not working do not (missing twain) and scan from the software installed launch the scanner (activate powersave); Opens the window of the software, but analysis does not start.

  Win10 64-bit; USB. HP CP1025nw the wireless is the other HP product installed. ASUS z97 MB, i7 - 4790 k / 16GB, SSD.

  I tried and does not work:

  -different, another USB port USB cable

  -new installation of 64-bit Win10

  -a lot of removing the software and driver (windows install cleaner, file removal, registry) and reinstall

  -HP support assistant/framework/scanning, printing doctor [result "don't install the driver" awhile, but obviously it is installed and the wizard fails to resintall it]

  Installation of the software in safe mode (after editing registry it is possible) all the complete component installs (scan software, iris, twain, etc.) but always the same questions: scanning does not work.

  Any idea or suggestion?

  OK, here's the solution that works for me:

  YouTube

  In brief

  -check out you the shape of the package files (winrar will be required)

  -HPZstub.exe (NOT run Setup.exe)

  problem solved...

  I went two hollow guidance package and remote session with support and got this link after my file submitted in support of the L2.

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• 'Install' option does not work when installing apk

  I encountered a new problem on my detail of Asia xt1052 x 1, the 'install' option does not work for me when I m trying to install any apks! What might me the problem, guys help out me! I thought he could show me the problem but this isn't because I checked the sensitivity to this place

  Good point. Brightness apps are overlays. They don't Sun really onscreen, but put a filter on it dark. These can interfere with applications app. So if you have a screen dimming app then turn it off.

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• Tax Turbo installed but does not work on Windows Vista

  Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.

  Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down".  Any help?

  Have you ever successfully run this program on your machine?  So the system restore helps you, if if he was running very recently.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Which edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista?  64-bit versions may not be compatible at all?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

  The program will run in Mode safe?

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Problems with the launch of other programs via shortcuts on your desktop?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Adobe Flash is installed but does not work.

  Shows that Adobe Flash is installed but does not work.  whenever I try to watch a video, it says I need to install adobe flash

  original title: adobe flash

  Why do you send the original to a download of the Adobe Reader software, poster when their question Abobe Flash Player?

  The current version of Adobe Flash Player is 11.2.202.235

  http://get.Adobe.com/flashplayer/

• HP Scan does not work on Photosmart 6510

  HP Scan does not work with Photosmart 6510 wireless installation. I've deleted and reinstalled SW, SW, ran update doctor Scan and everything was reported OK. When I ran the scan test of the HP scan window comes but there is no value in the resolution box. When an analysis is attempted, I get ERROR SCAN only. I can scan successfully by other scanning programs.

  Paul sent me the log files, and from there, we followed the question until for the binary file HPScan.exe incorrect compatibility settings.   This file is located either in your "program files (x 86) \hp\\bin" directory (for 64-bit systems), or "program files\hp\\bin" directory for 32-bit systems.   In the case of Paul, his EXE was created to ensure compatibility for XP, which caused the application to try to use WIA 1.0 on a 2.0 WIA (Windows 7) system support.    This caused the app to not to interview the drivers for supported resolutions/etc and so the drop-down list is empty in the implementation of the resolutions.

  If other people see empty resolution lists in our application, it might be useful to double check that your EXE is not set to XP compatibility.

  Thank you

  Jeremy

• HP Envy 5530 e-all-in-one: copy/scanning does not work

  All the functions of the printer/scanner worked before Windows upgrade Windows 7 10.  After 'upgrade' to win 10, scanner and copier functions are kaput.

  SYMPTOMS:

  Printer funtion still works

  * Copy funtion indicates "" Now"copy" but never active scanner.  Pressing Cancel does not stop the process.

  * Manual SHUT DOWN does not work with constant "Shutting Down" message.

  * Scan to the computer and scanning to E-mail functions do not work

  * Try to run Windows scan "does not recognize the HP profile" and cannot scan using Windows 10

  ACTIONS:

  * Initially received 'C4EBA230' message on the printer screen blue with flashing icons, but a hard reset solved error

  * Have completely uninstalled & reinstalled software base three or four times of HP and HP update disc once software has detected and installed

  * Ran HP, utility for troubleshooting several times before and after reinstalls for problems of scan - driver detected every time problem.   Ignore the results of audit of pilot and proceed to the verification of scan did not work

  * Performed four resets hard to return to the firmware with parameters.

  * Tried scanning HP and Capture app (Nope - message "Device is busy" - same device is not)

  * Voltage checked the cable power and the wall outlet (OK)

  * Checked ink levels (more than one half full)

  * Searched updates firmware (not available on HP support site for want 5530)

  Seems to me that it might be mutiple problems/possible solutions:

  Machine firmware problem?  n ' any means to reinstall the current firmware via a download?

  Mechanical scanner problem? -scanner engine bad/blown bulb? -where is the nearest HP Service Center authorized Texas?

  New driver development necessary to scan to computer compatibility with Windows 10? -C' you all of the problem

  Your diagnosis?

  Hi doktor,.

• Error HP Photosmart D110-Twain. Scanning does not work despite uninstalling and reinstalling it.

  All of a sudden my scanner does not work on my HP Photosmart D110 printer.  I tried to uninstall and it reinstaling several times.  The HP Troubleshooter arrives with a Twain error.  How can I fix it?  The extended error code is:

  8, (4,-2147221005, 0)).  (Note that dashes outside in the error code are straight, not curved.  Do not have the right on my keyboard).

  Hi LindaMC,

  Thanks for the reply!

  Looks like that maybe some things are lacking and there's a registry cleaner run which has removed some things. What I suggest you do is to perform an uninstall of level 3 and then once that finished, please download and run the HP printer install wizard to get the software reinstalled.

  If all goes well, once this is done, you should be able to start a new search.

• I have windows vista and I'm trying to uninstall the hewett Packard software of the printer I bought a printer problem and it does not work because the HP keeps popping up

  Who can relate to Windows

  I bought a Hewett Packard printer and it did not work properly so I bact to the store and exchange it for a printer problem.

  but before he took back the HP printer I do not uninstall the HP with the HP CD software. After installing the software problem I now the HP conflicking with the software of brothers. then when I want to print something the printer HP appears. My question is I tried to uninstall the program from HP and it does not work. I call the Hewett Parkard Tech. and no help there either. So please give me a direction step by step on how to uninstall the software Hewett Parkrad.

  Leon

  See if it helps:

  Three ways to uninstall and reinstall the software of printer/Scanner Hewlett - Packard
  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• HP5610 AIO Win7 install but does not work

  HP5610 SDGOB number-OfficeJet AIO - 0505 - I downloaded the Software Installation HP5610 Win 7 and run the install file.  Installation worked fine and the printer was recognized when the usb cable is connected.  However the HP5610 does not work with the software in any mode.  When you try to print, it prints partially and then stops and the Panel of the printer just flashes and indicates the ERROR.  I believe the software think that it is a Photosmart printer, but it's not. The printer does not print PhotoSmart cartridges... only the standard color cartridges.  When I look at devices and printers, the HP5610 is identified as a PhotoSmart printer.  Note that this printer works fine with another computer running XP.  I installed the installer twice, both with the same results.  I love this AIO - I need it to be running on my two computers of Win 7.  Anyone have an suggestions?  I have no idea what to do next.  Thanks for your help.

  Thanks for the reply.   Well, I have two computers here.   I have an old Pentium 4 that I upgraded to XP and now on Win 7.  I know that I have some problems with it's hardware compatibility...  I installed the HP5610 three times and he moved smoothly, but the printer keeps hanging up or gives error messages.  I uninstalled the HP5610 installation twice and installed three times, always with the guarantee off (Avast).   The second computer is a relatively new I-3 with Win7.  Absolutely no problem with the installation of HP5610 I-3 and the printer works perfectly.  I think is no longer the driver HP does not work - I know not that this is computer hardware/Win 7 on the Pentium problems.  I have another HP printer (1010) in collaboration with the Pentium and a scanner EPSON also work with it.  I'll use the HP5610 on the I-3.  Guess it's time to replace the old Pentium...   Here, I have 4 HP printers...  HP puts the large printers that last a long time.   Thank you.

• SCAN does not work

  Hello.
  I installed a Linux R2 RAC Database 11g on two nodes. First of all, I'm not familiar with SCAN so my request may sound silly.
  
  The problem is that when I try to connect from Windows using SCAN post it does not work. I didn't not try another station LAN (because I didn't).
  
  One of the nodes, I opened tnsnames.ora that contains only this:
  
  LABDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = lab - scan.home.adi)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = labdb.home.adi)
  )
  )
  
  If I connect from one of the nodes, it works fine:
  
  [oracle@node1 bin] $. / sqlplus system/salam@LABDB
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 08:30:22 2012
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  SQL >
  
  If I try to Windows, it isn't (I used exactly the same content in tnsnames.ora)
  
  C:\Users\a2dyxzz > sqlplus system/salam@labdb
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 16:02:18 2012
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  ERROR:
  ORA-12537: TNS:connection closed
  Enter the user name:
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  If I edit tnsnames.ora on Windows and HOST = node1.home.adi (the host name of the node 1), it works fine.
  
  C:\Users\a2dyxzz > sqlplus system/salam@labdb
  SQL * more: Production version 11.2.0.1.0 on Mon 2 Jul 16:32:06 2012
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  SQL >
  
  After documentation, everything seems fine:
  
  C:\Users\a2dyxzz > nslookup lab - scan.home.adi
  Server: Poppy.home.adi
  Address: 192.168.22.10
  
  Name: lab - scan.home.adi
  Address: 192.168.22.152
  192.168.22.153
  192.168.22.151
  
  C:\Users\a2dyxzz > ping lab - scan.home.adi
  
  Ping lab - scan.home.adi [192.168.22.153] with 32 bytes of data:
  Reply from 192.168.22.153: bytes = 32 time = 7 ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 6ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 304ms TTL = 63
  Reply from 192.168.22.153: bytes = 32 time = 4 ms TTL = 63
  
  Ping statistics for 192.168.22.153:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 4ms, Maximum = 304ms, average = 80ms
  
  [grid@node1 ~] scan srvctl status $
  VIP scan1 SCAN is enabled
  VIP SCAN scan1 runs on the node node1
  VIP SCAN scan2 is enabled
  VIP SCAN scan2 runs on the node node2
  SCAN VIP Scan3 is enabled
  SCAN VIP Scan3 runs on the node node2
  
  [grid@node1 ~] $ srvctl status scan_listener
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is running on the node node1
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is running on the node node2
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is running on the node node2
  
  [grid@node1 ~] listener srvctl status $
  Listener LISTENER is enabled
  Listener LISTENER runs on one or more nodes: ud1 UD2
  
  [grid@node1 ~] scan srvctl config $
  SCAN name: lab - scan.home.adi, network: 1/192.168.22.0/255.255.255.0/eth0
  SCAN VIP name: scan1, IP: /lab-scan.home.adi/192.168.22.153
  SCAN VIP name: scan2, IP: /lab-scan.home.adi/192.168.22.151
  SCAN VIP name: scan3, IP: /lab-scan.home.adi/192.168.22.152
  
  [grid@node1 ~] $ srvctl config scan_listener
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  [grid@node1 ~] srvctl config listener $
  Name: LISTENER
  Network: 1 owner: grid
  Home page: < CRS Home >
  End points: TCP:1521
  
  Thank you
  Adrian
  
  Published by: Adrian on July 2, 2012 P 06:55

  Hello
  Please put here

  
  
  $GRID_HOME/bin/lsnrctl service LISTENER_SCAN2
  
  $GRID_HOME/bin/lsnrctl status LISTENER
  
  SQL> show parameter remote_listener
  
  SQL> show parameter local_listener