Printer/Scanner with Windows 7 problems

Similar Questions

• Should what download I do Canon iP3600 printer compatible with Windows 7?

  Can anyone advise what DOWNLOAD I need my printer compatible with Windows 7?

  The Windows 7 Compatibility Center reports a compatibility with printer Photo Inkjet Canon PIXMA iP3600 in 32 - bit and 64-bit Windows 7. (report full here).

  

  You can get the current drivers and software support from Support of Canon PIXMA iP3600 hereon site. Make sure that you choose the correct version of Windows 7 you are using (for example 32-bit vs. 64-bit).

• I would like to determine the levels of ink a printer 6122 with windows 7.

  I would like to determine the levels of ink a printer 6122 with windows 7. Attempt to use the abortd installation CD with the message "bad BONES". I installed the driver 990c work around according to the instructions from HP. It is another way to get the utility package that came on the 6122 install CD?

  Printing and scanning Dr. may not be able to detect if ink cartridges are not HP, HP inks no ink installed? You can try cleaning the contacts on the cartridges and power in cycling of the printer.

  To clean the contacts, you can reference this document from HP: print cartridge error.

• How can I check the ink levels in a printer-c410a with windows 8?

  How can I check the ink levels in a printer-c410a with windows 8?

  Hi Doug007,

  I see that your wanting to check ink levels.  I'd take a glance on the document below it shows alternate ways to check ink levels.

  Control of ink levels

  I hope this helps.

• I am looking for a switch 2 x 1 printer compatible with windows 7

  I am looking for a switch 2 x 1 printer compatible with windows 7 or drivers for Belkin F1U201 I

  You could try to install Vista (32 bit only) driver in compatibility mode and see if it will work:
  http://en-us-support.Belkin.com/app/answers/detail/A_ID/2569/~/f1u201---2x1-USB-peripheral-switch---driver

  Depending on your current configuration, it may be easier in the long run to buy a wireless printer and share (if your PC supports wireless). Or buy a router that supports USB devices such as this one:
  http://www.Amazon.com/GP/product/B00387G6R8/ref=s9_simh_gw_p147_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=Center-2&pf_rd_r=0RE9YC0G15RM1KP1S3FZ&pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846

  In this way, you can use wifi and UTP to connect computers and printers.

  SC Tom

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Printer HP deskjet 6940 with Windows 7 problem

  I have a HP Deskjet 6940 printer that doesn't work with my Windows 7. This can be corrected?

  Hello

  You will have to install the software of the printer that is compatible with Windows 7.

  Go here - http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=468003&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=468001 and choose the version of Windows 7 you have.

  Once you have done this, you should see the instructions and be able to get the software needed for your Deskjet 6940.

  Let me know how you go.

  Good luck and enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• Pavilion J410: supported printer/scanner for Windows 8.1

  Hello

  8.1 Windows does not support my printer/scanner HP J410.  It works on my laptop, but it's a pretty prehistoric, with Vista OS.

  So, what can I do for that device installed on Windows 8. 1 as well?

  Hi @deurs7,

  Welcome to the Forums of HP Support!

  I see you're wondering if the "J410 HP" is compatible with Windows 8.1. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  You probably use pilot integrated window, which is causing you issues. I download and install the full feature software and drivers for your printer.

  In order for me to help you better, I will need more information.

  I'll assume you have the HP Deskjet printer, which of you have?

  What is the name and the product number of your printer? How can I find my model number or product number?

  HP Deskjet 1050 has all-in - One Printer series - J410

• printer compatibility with windows vista 64-bit home premium

  When I installed the software for an hp 5650 printer on my dell xps with window vista 64 bit family premium, I received a message stating that the operating system was not at a minimum level for performance maximum printer.  I printed a word document and photo, and they seemed very well.  What does the message mean?  Y at - it a upgrade for my os should I download?

  There is no upgrade of the software of the printer.
  HP wrote the software and drivers, not Microsoft.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01655752&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=304445

  Link above has HP workaround for problems with it.

  See you soon. Mick Murphy - Microsoft partner

• Canon BJC 80 printer prints only with Windows 7

  I installed Windows 7 on my laptop and downloaded the new driver for my Canon BJC 80 printer.  The computer seems to recognize the printer, but it does not print.  I do not understand why my printer is listed as the default printer and appear to be installed correctly, but does not print.  My printer works already without problem with XP and Vista.  Is there anything I can do to get the printer to work?  Or my printer won't work with Windows 7?  Thank you.

  I have Canon BJC-80, working on Windows 7 Sony Vaio laptop: USB-parallel interface did not work. Bought and installed StarTech 1 Port PCI Express (x 1) basic parallel ExpressCard ($70 +) that supports two-way equipment. Removed the previous installation of BJC - 80 and reinstalled the printer on LPT3 (was on LPT1). Worked perfectly. Hope you have an ExpressCard interface to use; If this isn't the case, maybe there are other bidirectional port LPTx more robust handling solutions. Found this solution of amateur astronomers who were trying to get the old CCD cameras to work via the printer port. They found the USB interface / incomplete and required parallel bidirectional handling. Nice to have this small printer with me on travel now. I hope this helps.

• How to import images from the printer/scanner in Windows 8

  Windows 8 has a program to import images from a printer/scanner?

  Hi TEGKy,

  You can follow the steps described in the connection with the similar question.

  http://productforums.Google.com/Forum/#! 0Qc3joM8ZZU/picasa/subject

  http://forums.MacNN.com/t/299779/how-to-import-photos-from-scanner

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/import-pictures-and-videos-using-Windows-option/b4a82dce-7b52-4969-8af1-21eb71f160c7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/import-pictures-from-scanner/995b5888-cd9a-45A3-ACFF-044bec24ec0a

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-in-importing-pictures-into-Photo-Gallery/32e61751-4fb9-41e3-a4fe-8aaab9c1dee1

• How to set up the printer Bluetooth with Windows 8

  Original title - device

  How to configure the Bluetooth printer to work with my laptop Bluetooth (windows 8)

  Hi Henry,.

  Thanks for posting the query on the Microsoft Community Forums.
  We will try to help you with this.
   
  What is the number and model of the printer?
   
  We suggest that you follow the steps below:
  a. in the form of office, press the Windows key + X, select Control Panel, and then click devices and printers.
  b. click Add a printer.
  (c) in the Add Printer Wizard, click Add a network, wireless or Bluetooth printer.
  d. in the list of available printers, select the one you want to use and then click Next. (If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list).
  e. If you are prompted, install the printer driver on your computer by clicking on install driver. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. follow the additional steps in the wizard and then click Finish.
   
  Also check out the links below for assistance:
   
  Add, view, and manage your devices and printers

  http://Windows.Microsoft.com/en-us/Windows-8/install-view-manage-devices-Printers
   
  Install a printer
  http://Windows.Microsoft.com/en-in/Windows-8/install-a-printer
   
  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• HP Photosmart C6380 does not scan or print photo with Windows 8

  Just bought HP M6/1125DX/15j with Windows 8. My current HP printer is a HP Photosmart C6380 All In One.  The printer does not work, but the photo and analysis part icons no longer appear which were on my front desk. I tried to download the entire program which said would update my printer, but after 6 tries to one hour each, at the end he just said my download has been cancelled. Is there a chance that my printer will be supported by Windows 8 and how do I do that if I can't download.  Or am I stuck buying a new printer? Thank you

  Hello

  The C6380 is supported in Windows 8 and has a Solution Full Download.  I would try using the Print Wizard to download and install the drivers.

  Try this link for the Print Wizard.

  Print the installation wizard

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start