Printer spooler does not work. Printer registry file corrupted

Similar Questions

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.

  My Recycle Bin does not work. Deleted files are not stored in the Recycle Bin.
  When I delete a file, none of these files are saved in the Recycle Bin.

  tried to restore desktop icons. no use.

  Tried to change the icons as method 2. Yet, my deleted files are not saved in the trash.

  My last bag of stuff.
  I assume that your allotted basket size is too small or you were not "empty" the collector for a LONG time.

  Right click on the Recycle Bin > properties > size under Custom, how many MBs are awarded?
  Mine is 1023 MB. I saw someone almost 5000 MB.

  Increase size, play with the numbers until the darn bac actually works the way it should be.
  Please post back. I'm curious to know the result.

  t-4-2

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• AP thunking spooler does not work

  Unable to properly print a verification email, for example aircraft bookings, etc. Error message is: THUNKING SPOOLER APIs FROM 32 to 64 PROCESS has STOPPED WORKING. Help, please.

  Read the following article to see if it applies: http://support.microsoft.com/kb/941962/en-us.

  If this does not work, go to start / Control Panel / Printers and check for all printers that are not your printer (or other printers you use).  Delete the others that you do not recognize.  See if that fixes the problem.

  If this does not work, try to bypass the spooler to avoid this error msg (this is just a suggestion - I don't know if it works in this case).

  Start > Control Panel > printers > right click on printer icon > advanced > print directly to the printer. (this allows to bypass the spooler).

  Although this may not solve the problem with the spooler, it may at least allow you to print (which is a start).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows does not load because registry files system is missing or damaged. error code: 0-xC0000001

  My computer laptop lenovo has a problem. I am not able to start windows. So, I asked for Lenovo recovery DVDs. Now, when I tried to boot from this system recovery DVD, I get the following error after loading the file screen. Please help ASAP!

  Window Boot Manager
  =====================
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc anf resart your computer.
  2. choose your language settings, and click Next
  3. click on the your computer Lair

  If you have not this contact your system administrator or computer manufacturer

  File: \windows\system32\config\system

  Status: 0 xC0000001

  Info: Windows failed to load because the registry files system is missing or damaged.

  Hi Walter, thanks for the quick response.

  Message system ther said however to fix it with the windows installation disc.

  So I'll be able to get a copy of the cd to the Microsoft Vista operating system? I can try with that and I hope that he can solve the problem.

  Hey Santosh Panda

  I'm sorry, but microsoft does not include disks of vista for the oem brand computers

  your manufacturer already provided you the means to reinstall vista

  There must be a reason why your "Reinstall vista" drive recovery lenove does not work

  and we cannot help you with that

  Lenovo can

  Walter, the time zone traveller

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Tiara startup script does not work when running file associated with

  Hello

  I have a startup script that works correctly with tiara itself, however when I open a file associated with tiara (tdms files) the startup script does not work.  Is it possible to ensure that the script runs without worrying?  Thanks for the help!

  Bala

  Hi Bala,

  Depending on your use case, I suggest you call the next VI, which comes with LabVIEW, after your purchase VI is the creation of the data file.  Just pass the data file path in the upper part of entry and your path to the VBScript file in less than entry.

  "C:\Program Files (x 86) \National Instruments\LabVIEW 2013\vi.lib\ExportToExcel\DIAdem report Assistant Start CSC.vi '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Re: Game does not work - d3dx missing file

  I installed a few game yesterda, but none of them do not work,
  Always missing file, files, like "d3dcompiler_43.dll" d3dx10_43.dll... .etc

  My friend told me just to download from the internet that never missing files but I guess the download of microsoft or toshiba or nvidia Web site will have more security.

  Please correct me if I'm wrong!

  Please show me the link or step to solve this problem!

  Thank you!

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8109 to download. You should also find that the required files on the CD-ROM to install the game in a folder that is supposed to be called DirectX. I think you should have jumped the DirectX installation whenever you installed a game.

• Satellite A210: ODD does not work - driver may be corrupted or missing - Code 39

  The STRANGE ('TSSTcorp CDDVDW TS - L632H ATA Device") does not work on my laptop more.

  In Device Manager, the Properties dialog box says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  laptop: A210
  OS: Vista 32 bit

  I think the material is OK, as I install dual-boot linux, the STRANGE works very well under linux.

  I found updates of firmware STRANGE on the Toshiba site, but these cannot be installed with the drivers dysfunctional.

  Is it possible to find the drivers somewhere? (I can use google, but I don't know if driver download sites are trustworthy).

  Any other ideas?

  Hello

  This has been discussed a lot of time here;
  The workaround is;
  -remove the ODD of Device Manager
  -access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Good bye

• Print spooler does not work

  Cannot print and all of my printer disappeared from my print list. Print spooler not working do not mistake

  Cannot print and all of my printer disappeared from my print list. Print spooler not working do not mistake

  You can start the print spooler by clicking Start > run and type the following command in the box run and then click OK:

  net start spooler

  The real question, however, is why the print spooler service is stopped and you should do to prevent it to stop again.

  You have a recent antivirus application with an active subscription? Which one?

  Have you scanned your system for malware using MalwareBytes Anti-Malware AND SUPERAntiSpyware ?  If this isn't the case, get these free scanners and do.  Do not forget to update before you scan them.

  If you have never installed a Lexmark printer, follow the instructions in a single Article to remove and reinstall the drivers for your printer.

  If you have or had a Lexmark printer, follow these directions as well (from http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm )

  If you have a Lexmark printer , these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmarkprinter installation process installs a service that makes dependentPrint Spooler service itself.  If there is a problem withservice Lexmark or a Lexmark printer driver (or you have removed using the procedure above),Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757 ).  The steps below makePrint Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  ... The sc config command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

• I get a message that the print spooler does not work

  printer was arrested, computer, shut down, turn on the computer, open a word file, checked the spooler.exe and it sees immediately 99% CPU usage.  Then I get a message that says that the spooler is not enabled.  What should I do?

  Are you trying to print before you get the error message or just come to the top as soon as you open a microsoft word file? are you sure this is spooler.exe which is taking up all the CPU not all processes combined?

• Movie Maker does not work with MP4V files?

  When I work with purchased the DVD, the error message that it does not recognize the MP4V of Movie Maker files. What can I do?

  Hello
   
  
  Thanks for posting in Microsoft Community!
   
  
  If I understand correctly you want to know if MP4V files are supported by Windows Movie Maker in Windows XP.
  
  I'm sorry to say but Mp4V files are not supported by Windows Movie Maker in Windows XP.
  
  To learn more about the supported files, please see the following link:
  
  Formats supported by Windows Movie Maker in Windows XP file
  http://support.Microsoft.com/kb/308464
  
  I have also provided a section below it may be useful for future reference:
  
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Movie-Maker/FAQ
  Hope the information is helpful and let us know if you need assistance on Windows.