Printer Spooler problem
After reboot - "Spooler subsystem App stopped working and was closed". No printer listed on the control panel of the printer window.
Hello
In fact, I have corrected a problem like yours this morning.
It had to do with a corrupted driver.
As printers are not getting loaded, it's probably one of them who has corrupted drivers.
You can also go to windows-> system32->-> Printer Spooler
If there is no file you can remove the and try to restart the Printer Spooler service.
You can read a fairly long article about it here
Tags: Windows
Similar Questions
-
Cannot print indicating print spooler problems
Original title: print spooler problems
Salvation of printing problems. Execution of troubleshooting etc. said istnt running print spooler. Does not restart when I go into administrative tools keeps of telling me error 1053. No idea how I could fix this?
Hello
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
I suggest you follow the steps described in the links to search for a file and check the question below:
1. What is the brand and model of the computer and the printer?
2. did you of recent changes made to your computer?
3. what store did you run?
Follow the methods and check them out below:
Method 1:
Step 1:
Follow the link below to run the Microsoft Fix It.
Diagnose and automatically fix problems printing and printer:
http://support.Microsoft.com/mats/printing_problems/
Step 2:
Follow the steps in the link below.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
You need to check if the Printer Spooler service is started from services.msc.
a. click Start, type services.msc in run and press ENTER.
b. double-click the print spooler and verify that the status is set as Automatic or Manual.c. right-click on print spooler and click restart.
I hope that the information above helps you.
-
Print spooler problem. ERROR (0X000006BE)
Print spooler problem. I have a problem with the spooler to stop continuous printing. I get this ERROR (0x000006be). I've seen a lot of suggestion already... such as printer drivers are corrupt, need to clear the printer, etc. I already went to SERVICES and connected so that administrator, assign the automatic print spooler, restarted the Services 50 times, etc. Nothing works. In response to a lot of suggestions, NOTE: I have not a printer is installed, I did not have any printer software installed, there is no DRIVER not installed appears to be damaged. When I go to control panel > printers... There is no printer listed. When I click on add a PRINTER, I get the message (0x000006be). Any suggestions
Hi Wireem,
What is the brand and model of your printer?
I suggest you to follow the steps and check if it helps.
Method 1: Install the latest software and drivers for the printer from the printer manufacturer website and check if it helps.
Method 2: You can also follow the link and run Microsoft Fix - it and check if that helps.
Diagnose and automatically fix problems printing and printer
-
I'm on a Vista 64-bit operating system. I have a Xerox printer wireless network. I started having a month ago print spooler stops. The problem can settle with a reboot. Now the problem has appeared and will not disappear. I can restart the print spooler, it will show that it is started, but when I try to add the printer I always get an error message that contains error code (0X00000ba). I searched on the internet and see that this is not a unique problem, but I have yet to see a solution that works for me. I followed the procedure of Microsoft to solve print spooler problems; one that's "Mr. Fix It". That did not help. I tried to go back to restore points more aged, but which did not help. At this point I'm stuck on how to go forward. Any suggestions?
The problem will be back because somewhere there is a bug. It's certainly specific centres of suspicion about Adobe Reader and pdf files. Some users have passed to Foxit, but while this may work for some, it is not the universal solution.
-
Canon printer this print spooler problem
I have a printer canon set up a network for the last 12 months without a problem. Today, when I press print, the document goes to the spooler, but does not print. Only when I restart the computer will display the items. All other computers on the network are not performed. According to the Canon when I called them, they said that I had a problem of print spooler. The spooler is set to automatic and when I manually restart the spooler prints the item. The printer driver has been reinstalled and I am sure this isn't the printer. How can I solve this problem, then the element I want to print, print when I press the button? If the computer is connected to the router by cable, this problem does not occur
HelloYou can follow below link that can help you to solve your problem: -
Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)
I just upgraded from Vista to Win 7 Ultimate. Once installation is complete, I tried to update the drivers and install the latest updates. Everything worked except for HP LaserJet 4 L driver. As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246. I then removed everything from the spool directory, rebooted and tried again. This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.
I can't find the information for this error (80070706) anywhere on the web. Any help would be appreciated.
More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable. Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.
Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist. If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.
Everything is running as an administrator. It worked perfectly under Vista.
Thanks for these links, but these proposals did not help nor solve the problems.
After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos". Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility. Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.
In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur. Cryptic error numbers and unnecessary event log entries did not provide useful clues.
-
I have a HP 5600printer. After loading and execution of Smart PC Fixer my computer started running better, but my printer will print only one line at a time and then a pause. It takes about 4 minutes to print a page. I tried changing the settings in the Advanced section of the print driver but still no change. Any suggestion would be appreciated. Thank you
Hi,
Thanks for posting your question in the Microsoft Community.
I understand that 5600 HP printer takes 4 minutes to print a page, after loading and execution of Smart PC Fixer on your computer. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. you receive an error code or message?
2. What is the brand and model of the computer?
Please follow the methods and mark the question below:
Method 1:
Follow the steps in the link below.
Solve printer problems:
Method 2:
You need to check if the Printer Spooler service is started from services.msc.
a. click Start, type services.msc by clicking run and press enter.
b. double-click the print spooler and verify that the status is set as Automatic or Manual.c. right-click on print spooler and click restart.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
-
My printer HP laser still not connect to my desktop Acer Vista. Print spooler problem.
My computer has recurring problem of Acer Vista vs HP1018 Laserr "print spooler". My man IT cannot set after 3 gos, and said I need a new computer (!). Nothing goes to the print queue (empty) when I print. I reinstalled the latest version of the driver via HP but nothing helped. Most annoying... Please help if you think that there is a way. Aye, Dom
Hi Dom,
1. What is the error message exactly are you receiving on print spooler?
2 did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you run the Microsoft Fixit since article and if that helps.
Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/en-us
You can also see the following article for more information:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after
a. click the Start button, and type cmd in the box start search
b. right click on cmd in the list programs and select run as administrator
If you are prompted for an administrator password or a confirmation, type your password or click continue
c. at the command prompt, type the following commands and press ENTER after each one
net stop spooler
and then
net start spooler
This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.
It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.
-
Printer Spooler problem - I do not know what it is? I want to just print
I tried to print, and the comment is "printer spooler does not. How can I make it work
Try to run Fixit from here:
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsYou can also manually restart the print spooler service.
-
Error: 0x000006ba print spooler problem
I get this error msg when I try to sing on my printer... I tried what you did to try and
solve the problem, but I get the message and cannot use the prionter...
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
The folder administrative tools devoid of orders for the print spooler problem that is stopped.
I could not install my printer because the spooler is stopped. According to Windows help, the problem can be solved by administrative tools. But the biggest problem is: the Administrative Tools folder contains anything other than "Windows SuperShell Modules. The Service order through which is accessible the print spooler service is NOT there. Is there another way I can make the spooler running?
Hi francisco a.sanchez,.
I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
Print spooler problem? Uh, maybe?
If I have problems with a printer/plotter that I added to my Vista laptop.
Whenever I have send a file "print", it starts up and about 3 seconds in the file, just tracer stops and the error file in the print queue. I do not know if it is a mistake of the coil, but it shows me nothing about the problem. He stops, then finally the status changes to 'error' and happens again and again. I've uninstalled and reinstalled the driver. This tracer works perfectly on an old Dell XP I use so I know that's not the plotter.
I not even looked to see if WinPrint (print processor) usually caused this kind of problem, but couldn't find anything about it. I'm not super tech savvy. It drives me crazy!
Hello
If it's a spooler error, this will help you.
---------------------------------------------------------------
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
I'm not technical. I installed the drivers for a HP 1018 and was able to print. Now, I'm getting the print spooler error message. I have done repeatedly restarting the service etc. and can not get the impression of being recognized. The status of the service keeps going to Stopped even when I click on the Start button. In the details, I get this message.
Signature of the problem:
Problem event name: APPCRASH
Application name: spoolsv.exe
Application version: 6.0.6001.18000
Application timestamp: 4791a2af
Fault Module name: ZSR.dll
Fault Module Version: 6.20.1625.0
Timestamp of Module error: 462fe8cf
Exception code: c0000005
Exception offset: 000000000002b54c
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 4105
Additional information 1: c302
More information 2: e4987853a1bc8863e54900eb2ed9bd6d
3 more information: 62f8
Additional information 4: ee8bca57ff08c0c36b376b3cd7caae2eRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409IF ANYONE CAN HELP!
Hello
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspxSpecific help:
HP support
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
------------------------------------------------------------Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and replace all the lost files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Print Spooler Problems in Windows 7 32 bit
I just upgraded my Dell Inspiron 1526 Vista Home Premium 32-bit, that I never had a problem with, for Windows 7 Home Premium 32 bit. All my files and programs were very good, but my printer settings seem to be spoiled. I get the message that the print spooler stops so unexpected and got the error code: 0x000006be. I saw on a forum Vista how to go manually turn on the print spooler and ensure that it was in automatic mode. Then, I started it, and he said that it was automatic, but I tried to install my printer again and it stopped again. Help, please. For now, I'm not so sure that's a good idea to upgrade. And the printer is brand new - it's a Canon PIXMA MP 250. I just bought a few weeks ago and had no problems with it in Vista. Thanks for your suggestions, you can give.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 Professional 32 bit. Printer Spooler problem. Cannot print.
I have Windows 7 Professional 32 bit. I did a clean install of Vista.
Basically I'm not able to add a printer, because of the many errors I get.
If I go to the printers-> add printer. I got the error: "Windows can't open add printer." The local print spooler service
does not work. Please restart the spooler or restart the machine.
Then I go to Run-> Services.msc and manually restart and 'Start' the printer spooler.So now the Add Printer dialog box and choose to add a local printer... There is no existing port to choose
go and it does not create a new port. (I have to reboot and start the spooler each time before you can
to successfully open the Add Printer dialog box). (The Printer Spooler as somehow 'stop' shortly after I 'start'.Go back and I try to add a network printer. I see my printer network hosted on the network drive, click on the
printer and I select the printer begins to try to install it, but it quickly produces the error message:
"Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or
restart the machine.I have absolutely no idea what could cause this problem. And Yes, I tried the Support to call Microsoft, the rep had no idea what was causing it.
And the print spooler dependencies are listed below:
This service depends on the following system components:
Remote procedure callThe following system components depend on this service:
FaxIf any ideas why I can't print?
Hi j8636,
As the print spooler service stops automatically, I suggest that run you a scan for viruses/malware.
Run a virus/malware scan and get back to us.Microsoft Security Essentials
http://www.Microsoft.com/Security_Essentials/How to get rid of malware by Vincenzo MVP
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42Kind regards
AbdelouahabMicrosoft Answers Support Engineer
Maybe you are looking for
-
Can someone tell me how to reverse the effects of a return to the top is via iTunes, can I restore it back to where it was before the restoration
-
After lastes update I can't yahoo text (SMS), I can see someone sent & I can't see
I use Yahoo to send text messages. After scoring in the mail from yahoo, on the right side of the new message message is a drop down menu message with three e-mail options, message Instance or SMS (text message). When I select SMS he begins as he goe
-
How can I include all the VI that are listed in the hierarchy of VI for a source distribution
I'll send my request to another developer. To do this, I used the source distribution function. But if I generate the files I miss the VI they are stored in the form of instrument drivers. How can I include, too?
-
Getting the error: the requested lookup key was not found in any active account activation context
I can't run windows update. I get this error: the required search key not found in any active account activation context. I use XP.
-
Variables for voltage and current on each component (for use in graphically the diagram)
Hello I have a very simple circuit containing only a source of AC voltage and resistance of two series. I want to draw the voltage of the source and each resistance. I can't find any variable involves pre right now, I know I und came to the value of