Printer stops printing after 1 third of paper

Hello. I have an Epson Stylus Photo px700w which stops printing after 1 third of the book. It doesn't matter if it is an impression of a document, a testpaper or a copy. Because I still had warranty, I went back to the store and after 3 weeks, they told me it was because I was using preholed paper. Please tell me it isn't true that a printer will not work if I'm loading with preholed paper.

Best regards

Anders O

As suggested, try again with non-perf, paper non-trou.

According to the manual Pg18, you cannot use Binder or paper hole (it shows 2 hole paper and binding).

Tags: Windows

Similar Questions

  • Printer stopped working after I removed a paper jam - Deskjet 6988

    I removed a paper jam today, according to the instructions. But since I did it, it will not be printed. The power light is, as if it's OK, but he absolutely refuses to print.

    My printer is a HP Deskjet 6988 and I am on Windows 7, 64 bit.

    Whenever I try to print, the print queue displays the print job for about a second, then he faints. I try to print again, it disappears. Then, if I do it a third time, it appears in the list and stays there, but the printer does nothing.

    After two minutes the queue no longer mentions it as the "impression". Instead, it says, "error printing". I try to delete the print job, but it just sits there, saying "error printing". It will not erase. The only way to remove it is by the printer stop or restart the computer.

    If I try to print after that stuff all over again.

    I tried closing the printer and reboot, restart the computer, power cycling (stopping the printer, unplug the cables, waiting..., plug again and restart).  I ran the Diagnostic Utility and it tells me that it works very well - well, very good for a very large paperweight.  I used troubleshooting via the Control Panel, and he said: "a print job in the print queue prevents other printing of print." But as I have already said, delete the print job does not solve the problem.  I am stuck in a loop of the removal of print jobs and nothing works.

    Help, please!

    Hey Tigger,

    It may have been stuck in the diagnostic mode - not able to move forward or backward for a time very long.

    Next time, if this never happens again, you can try a Reset of the printer:

    Here are two types of reset the base printer:

    (1) if there is a keyboard, turn it off, then on and press on # and 6 (press and hold while turning on the printer).

    (2) without a keyboard?  So unplug that LEAVE unplugged for 30 seconds to a minute.  Reconnect it.  (Be careful with this one - will not shock).

    It can become a little more complicated than that, but a basic reset sometimes "will have the printer attention" if it's just "spinning" and nothing else will not physically.

    I'm glad it works again.

    Maybe printers receive loners.   The smile.

  • Why my HP Photosmart C4480 all-in-One printing after I removed a paper jam not?

    When printing, I added paper into the tray paper, and the rollers grabbed the entire stack of paper. The printer has stopped, noting "paper jam". I removed the stack of paper in the printer, and now it won't print at all.  (HP Photosmart C4480 all-in-One)

    Thanks for all the useful things try, but without apparent reason, the printer started working again.

  • All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

    In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

    Any ideas wher can I start?

    Welcome to the Forums of HP, @CharlieCC,.

    I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

    Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
    4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. Open the folder Util
    7. The CCC folder
    8. If you have a computer HP run the L3uninstall.exe (or .bat).
    9. Once the uninstall is complete, reboot the computer
    10. Follow these steps to reset the registry settings and options for Windows Installer.
  • Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

    Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

    Hello

    ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

    You can also track information to try to solve your problems of printer below

    read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    and read this microsoft tutorial too

    Introduction

    This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

    How to use this tutorial

    For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • LaserJet 3050 stopped printing after last update 1st OCT 14

    LaserJet 3050 stopped printing after last update 1st OCT 14.

    Work status displays "Printing" but watch then "Waiting for printer to become available" and prints ever.

    Tried the usual power out voltage/power on both computers & printer.

    iMac with OS 10.9.5

    Thanks for any help.

    Darrell

    P.S. This thread has been moved to printers - LaserJet Macintosh compatible products. Forum Moderator - HP

    Printer started working today.

    I deleted my printers HP3050, removed cable printer, stop computer and printer.

    restarted printer and computer, reinstalled cable and now the printer works normally.

  • Reference Dell V715w stops printing after 1 post

    Hi I have a Dell v715w which stops printing after printing 1 job.  I mean it prints 1 whole work and then 5 minutes later if you are going to print anything else nothing happens.

    I have to remove all the dle *. * process, stop the spooler service, and then restart the spooler service for and then restart the print job.

    Any ideas?  Help?

    This becomes quite painful when you want to print more than one thing at a time.

    Thank you

    SkrOfInfo,

    Happy that you guessed it work! Thanks for posting back.

    Take care

    Rick

  • AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work

    I just upgraded a fairly new computer of mine from Vista to Windows 7 Professional.  The upgarde went well however the AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work.  I tried to make the show thumbnails of running programs to display in the taskbar with no luck.  Any suggestions?

    Hi Lisa52465,

    (Already responded to dadams26 in a separate thread and it fixed the problem beautifully).

    Have you tried to run the Aero Troubleshooter? If this is not the case, try this:

    1. open the control panel

    2. go in the system and security category

    3. go to the Center of the Action

    4. click on the link to solve common computer problems

    5. click on appearance and personalization

    6. Select Aero

    He must either correct the errors problem or the State to determine the cause.

    If the Aero Troubleshooter is not the thing, maybe it's just that the Aero feature has been disabled by the update. Try this:

    1. right click on the desktop

    2 select Customize

    3. Select an Aero theme

    4 see if previews back

    Just for the record, could you let us know if any of the suggested fixes works (and which). If you still have problems after trying the above, could you please come back with more details (if possible).

    > This answer help?  If so, would you please click the green button to Vote as helpful to help future visitors encounter the same problem.

    All the best,

    Sharon

    Sharon Roffey
    Queensland, Australia

  • Network printer stops working after restarting the laptop

    I have 2 PCs both running windows Vista. A PC is a desktop computer ACER with a printer connected to a USB Port (HP Photosmart C4480). The 2nd PC is an ACER laptop also on windows Vista. I have a network home and print away from the laptop. Problem is when I restart the laptop I can't print remotely and do are Add' the printer again. Print spooling is nec automatic and active. I have downloaded the latest drivers HP for the printer. Just a note to say that ACER laptop my son who works in XP does not have this problem and can print after a reboot.

    Hi GaryPolaris and thanks for the answer.

    What is the brand and model of your printer? Have you checked to see if the printer is compatible with Vista? You can check this in the Vista Compatibility Center located at this URL http://www.microsoft.com/windows/compatibility/ . Also, you can try installing the Vista drivers on the XP machine. If the manufacturer has released Vista drivers simply download and install the drivers on your XP machine.

    I hope this helps. Please post back and let us know if it did or did not solve your problem.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • HP Envy 4500: Printing on Photo Premium Plus paper on Envy 4500

    Bought the new Photo Premium Plus paper and I am so frusterated I try to print on this subject!

    I get all the rear bars, especially on the back or cut the wide 1/4 of the image.

    Any suggestions?

    @Nadine63,

    Thanks for getting back to me. After taking a quick glance in the Specifications of the printer under the tray capacity paper, the maximum weight is listed as up to 281gms (75 lb). The one you use is heavier (80 lb) that is why you see the question.

    Let update you the software and drivers to make them compatible with your operating system Windows 10. Please follow the steps listed below:

    Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

    1. disconnect the USB key if you use a direct connection.

    2. remove the software HP Envy 4500 to uninstall from the control panel of your computers an option of the program.

    3. restart the computer.

    4. make sure that all the software 4500 envy has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

    5. now, go ahead and download the software and drivers for your desire to 4500 (DO NOT connect USB until the software prompts you to):

    HP ENVY 4500 e-all-in-One Printer series full feature software and drivers

    6. go ahead and print a test page.

    7. If you are unable to print a test page, run the HP print and scan doctor > www.hp.com/go/tools

    -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    You can try to start the photo, but I suggest to change the paper first. Please let me know if it was successful!

    Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  • Spoolsv.exe has 99% of the cpu when I turned off the printer after printing.

    Original title: spoolsv.

    I recently installed a new printer Lexmark Pro715.  Everything works fine, no problems with printing, but as soon as I put off the printer after printing, spoolsv.exe takes 99% CPU.  If I leave the printer in mode 'sleep', the problem is, but I do not often print, I prefer to turn off completely.  There is nothing in the print queue, everything else seems normal.  I can use the Task Manager to stop it, but this isn't a good solution in the long term.  I run MS Update and uninstalled and reinstalled the printer, with no effect.  It's driving me crazy.  I have Windows XP Home Edition SP3.

    From what I've read on the Internet about the print spooler using 99 to 100%, Norton is also sometimes involved as a contributing factor to a runaway print spooler for some people (where my request).

    IIRC, people would set their Norton to start a scan and when it was made, the print spooler has run amok at 100%:

    "Because I have Norton Antivirus, do a system scan every Friday night that I happened to see that the value SPOOLSV. EXE is using almost 100% of the CPU of the morning Saturday. It's the only time that it happens, so I simply stop the process in the SERVICES window, and life is good. I don't know why Norton Antivirus it triggers during the scanning process that I couldn't find anything on the Symantec relating to this site. »

    If the problem resurfaces surface, using abduction special tools on their website, you can uninstall your Norton and view the appearance of things without him - you can always reinstall again once, right?

    I disagree with Norton in general for its CPU and memory hogging and known interference with other XP processes (such as the restoration of the system), so I'd keep which in mind if the problem returns.

    A few years ago, I used to like Norton correct, but will never go back or recommend it.  Microsoft Security Essentials with it's lower overhead and footprint and some regular on the analyses at the request of the MBAM and SAS should hold your own system based on your surfing habits.  Your system will reward you with an improvement in the overall performance of the system as well.

    I can tell you that no single AV tool seems to know everyting so it is safe to use several respectable scanning tools.  Norton certainly doesn't know everything.

  • HPlaserjet3390: My Laserjet 3390 offers more double-sided printing after upgrading windows 10

    My all-in-one worked perfectly but after windows upgrade 10 I can't solitaire to print double-sided and does not

    as one more option.

    How can I get print double sided once again.

    Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

    • For the instance of the printer in question, bring up the printer properties dialogue.
    • Select the device settings tab.
    • Make sure the duplex unit is set to installed and not installed.

    You will probably need to be logged in with administrator credentials in order to change the settings of the device.

    If the device does not have a double-sided hardware unit, then you can not do Automatic duplexing, but you should be able to do duplex printing Manual (print odd sides, reinsert the paper print same sides) if the demand for source document and printer driver supports this.

  • Printer Epson C88 + won't print after new color cartridges replaced

    Printer Epson C88 + won't print after that new color ink cartridges have been replaced.

    Hello

    ·        What happens when you try to print from the Epson printer? You get the error message? If Yes, what is the exact error message?

    ·        Your printer is able to print a test page?

    ·        What you are trying to print? You use third-party applications to print? If so, what application are you using to print?

    Method 1:

    I suggest you run the fix it is present in the article below.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

     

    To further support I suggest you to check the article mentioned below.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    To get help, I suggest you to contact Epson. Click on the link below.

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=contact&OID=69123&prodoid=63059194

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • HP LaserJet P1102 cannot print both sides of the paper

    I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

    In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

    I tried to update the driver (downloaded from your site), but nothing has changed.

    I hope that you can add some useful tips and I can solve this huge problem.

    Thank you!

    Hello

    I understand that you can print is more on both sides.

    When the light flashes try and open and close the lid to see if continues to print.

    (there is no button for the printer but which will resume print jobs)

    I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
    You can download the drivers from this url.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

    Win8 and Win8.1 drivers are the same Version9.0.

    If you need more simply make assistance let me know.

    Please let me know if the printer is connected by usb or the installer on a wireless network.

  • I can't print after upgrade to Mac OS Sierra (error "Unable to filter")

    I can't print after upgrade to MacOS Sierra, always shown "cannot filter. I use AirPrint for Epson L355. Tried to reset the printer settings, uninstall and then install the printer, always in vain 'filter '.

    I think it has something to do with MacOS Sierra 10.12.1 Beta (16B2333a). Help, please!

    Update to the Sierra officially released

Maybe you are looking for