Printer suddenly stopped working with QuickBooks Premier 2012

Similar Questions

• DeskJet f380 printer suddenly stopped working

  My deskjet f380 suddenly stopped working with my computer laptop win 7 it shows offline

  Hello

  Have you tried to uninstall/reinstall the software?

  How are you connected to the printer USB or wireless?

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• My Synaptics touchpad virtual v7.13.0.1 of scrolling (HP ze4610 Windows32 XPSP3) suddenly stopped working with Mozilla 13.0. All the patches?

  Virtual Scrolling functionality works with PDF & Word 2007. He had worked with the old version of Mozilla...

  Hello, I do not know exactly but maybe this problem is related to the smooth scrolling feature, which has been enabled by default in firefox 13. you could try turning off again in preferences, advanced, General.

• Dell 942 all-in-one inkjet printer has stopped working with windows 8.1

  Printer drivers are installed. When you try to print the document doesn't seem to be in Quebec, then disappears.  Windows says it's not compatible, but I was able to scan documents. Any help would be appreciated!

  ozmoses,

  8.1 Windows comes with Internet Explorer 11. I hope that the original version is up and running. Windows Update comes from Internet Explorer 11 for Windows 7 and 8, and it has caused problems of print spooler. We found that removing IE11 and going back to IE 10 or an earlier version has solved this problem. Something you can't do with Windows 8. Unless there was an update to Internet Explorer is the last month or two that you can remove, issues of print spooler will perform until Microsoft releases an update.

  Rick

• HP Photosmart Plus B209a-m stopped working with a Macbook, still works with others

  We had this printer wireless printing of 2 Macbooks a running OS X 10.8.2 and another OS x 10.6.8 without any problem for some time when it suddenly stopped working with the old Macbook running 10.6.8.

  When we tried to print anything in that nothing happened, when we open the print queue, there's an exclamation point to the left of the print job and to say an error message something about the levels ink (ink levels were very well as it print to the other Macbook without problem).  We tried the buttons pausing and resuming.  I can't provide exact errors that we had because now that we have tried to reinstall the drivers we get a new series of errors.

  We redownloaded the drivers for OS X 10.6 on HP website and tried to go through the HP setup assistant.  When we arrive at step 'Select printer' and he takes us into the preferences system to add a printer - our printer shows up, but when selected, we get the following error message: some of the software of the printer is missing.  You may not be able to print to "HP Photosmart Plus B209a-m" Please reinstall the printer. software - and of course, we are not able to print.

  We uninstalled and reinstalled the drivers several times without any effect.  The only way that we were able to print off the computer is if printer sharing is enabled on the other Macbook (with OS X 10.8.2).)  Then, it presents itself as a separate printer and can be used by the old Macbook only if the other is on.  This isn't how it was put in place when we had the two work before.

  Any advice would be appreciated.

  Margorie

  What router are you using?  I guess that the 10.8 machine can print correctly?

  Let's start with that on the 10.6 machine: download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Satellite L300 - Built In webcam suddenly stopped working

  Hello

  I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

  I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

  When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

  The microphone works well on Skype, but the camera does not open!
  Please tell me how to solve this problem, what missing am me?

  > I tried the system restore

  You got the device using the Toshiba Recovery disk?
  In this case the cam should work

  Otherwise I would say that this unwanted material s.

  Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
  The webcam is connected to a USB controller on the motherboard.
  If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

• Because I installed a Satellite L300 printing software stopped working

  Hello!

  I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

  OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

  Since Thursday night, I tried to make it work, but I am faced with this message:

  When I load up, it goes to Windows error recovery:

  "windows does not start.a recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

  then it gives two options: Launch Startup Repair (recommended)
  Start windows normally
  ==========
  -then I click on (recommended) launch Startup Repair
  -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

  If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

  but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
  ========
  5 years report an abuse
  Additional details
  so I click "next".
  ========
  Then, I have 5 options:
  -Startup Repair
  -system restore
  -windows complete pc restore
  -windows memory diagnostic tool
  -command prompt
  ==========
  Startup Repair says that manually, it can't solve any problems

  -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

  -restoration of windows complete pc says I need to insert a backup disk which I do not have

  diagnostic tool memory Windows says that windows blocks it
  ============
  but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
  but I don't no where... I typed in the command prompt, but don't understand how to use it
  =========
  I also tried to click Start windows normally, but it won't work

  If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
  Please let me know what options are available. Can roll you back OS a few days back?
  Are some that are listed restore points?

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• Internal speakers Satellite C640 suddenly stopped working

  Hi friends,

  My satellite c640, internal speakers suddenly stopped working but works fine when the headphones or external sources are connected
  Is this a hardware problem?

  I m using win 7 64 bit and I tried to install the drivers but seems to be a hardware problem

  Thanks in advance

  Hello

  I don't know if it is a hardware issue of m.
  You may need to check certain settings.

  In Control Panel-> sound-> the Read tab.
  You should see the speakers selected as the default device.
  You can also click these speakers to the right and you should see a few options:
  Speaker Setup
  test
  Disable
  and so on.

  Test the speaker first. In my case, a short tone is displayed. You can also mark the speaker and click the properties button. You will see a second window with tabs. Check the second tab called LEVEL. Here, you can change the sound level.

  What happen exactly when you try to reinstall the sound driver? You get errors?

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• Firefox itself 3.6.9 upgrade and now I can't print anything from an open page, because HP Smart Web printing does not work with this version. What is an extension of replacement?

  "An unknown error has occurred while printing."

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

  The lack of compatibility of the HP Smart Web printing add-on shouldn't stop a printer HP to work with Firefox - all you lose is this stupid floating toolbar and adds some features.

  File > print or {Ctrl + P} should begin printing again, so all you have to do is make sure that the correct printer is selected, and then click the OK button.

  My advice is to try to the reset mentioned in this article.

• Satellite L50Dt - A - touchpad suddenly stopped working

  Hello
  I'm not a part of L50Dt-A Satellite. PSKM2A. It is running Windows 8.1.

  Last night the touchpad suddenly stopped not working, no cursor on the screen.
  The little mouse on the touchpad indicator has not been and is not yet lit.
  So I pressed the Fn + F5 key so many times, but that didn't work back.

  I went to the mouse properties in Control Panel, and under the hardware, it is listed.
  In Device Manager, there is nothing under the mouse either.
  I went to the site of Toshiba and downloaded the driver for the touchpad.

  However, on installation, it says that this is impossible because the computer already has one.
  I need to uninstall and reinstall.
  However, I don't find the touchpad synaptics original anywhere to uninstall driver.

  Everything is updated via windows update and I ran the troubleshooting tools and that you have restarted, and so far, nothing has worked.

  I plugged in an external mouse so I can use it.
  But I'd like my touchpad mouse works again.

  Any help you can give me would be much appreciated.

  Thank you

  > Yesterday the touch pad suddenly stopped working...
  I ve never been faced with this problem, but try first to make back the OS to an earlier time using system restore just to see what will happen.

  In this whole thing that it is confusing that touchpad isn't listed in the Manager under the mouse devices and other pointing devices.

• keyboard has suddenly stopped working

  Hi all, my keyboard has suddenly stopped working. I was installing an upgrade of El Capitan (later) and when the computer is restarted, it gave me this message that the bluetooth keyboard was not detectable. Well, I don't have an external keyboard, just the Interior came with the laptop. I have reset the pram and it still does not work. I looked at the system preferences and beach seems to be in check. Is it time to this service or do I still have options?

  Thank you

  Nadia

  Try resetting the SMC http://support.apple.com/kb/ht3964