Printer will not be installed.

Similar Questions

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  It's an old printer and there was only the 32-bit drivers for Windows 98 to Vista. Canon are unlikely to write 64-bit drivers now.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Well 5 hours 3 technicians Kodak this morning and my Eastman everything in a 5250 printer is not yet installed. Nobody seems to be able to install it

  While a 5250 printer and not yet installed, why it will not install and connect that is the question? 5 hours abnd 3 technicians with Kodak not able to connect.

  Eleanor,

  Need information. Your computer is it upgraded to Windows 7 or did it with Windows 7?

  Please tell me your virus protection and firewall.

  Also start searching for information system REMOVE YOUR PRODUCT ID and post the rest of feedback here.

  If trying to use the wireless adapter, make and model of your wireless router and the type of security you are trying to use. Also tell the channel if it is known.

  Rick

• My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well.

  My new printer will not print on my Quicken reconcile report.  It prints my program Word and e-mail very well

  If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.

  Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer.  The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:

  Click file > printer setup > for reports/charts
  In the window that opens, select your new printer using the drop-down list.  You should keep the default margins and fonts.  Click OK and you should be good to go.

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• the printer will not print-message ("script error line 2032-resi//ieframe.dill/preview.js)__

  I installed a dell 720 photo printer to my new laptop Acer. It does not print. script line 2032-resi//ieframe.dill/preview.js error message comes up. the printer will not print but shows that its installation - HELP

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&catid=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=PRN_INKJET_720&hidos=WW1&hidlang=en&TabIndex=

  Reinstall it using the right Vista 32-bit, if you have Vista 32 bit OS, since the link above of Dell printer drivers.

  See you soon. Mick Murphy - Microsoft partner