Printer will not work on Windows Vista laptop, but works fine on XP

Similar Questions

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Old HP P1100 printer will not work with Vist, which driver do I?

  After you have reinstalled my Vista OS, the old HP Photosmart P1100 printer will not work.  Should which driver I?

  That is very good news. What set of drivers that you finally end up using?

• HP LaserJet 1015 printer will not work on Windows 8

  I have a HP LaserJet 1015 printer will not work.  Used with Windows 7 and it works very well, it will not work with Windows 8. Nothing came out.  I used all the devices, coil, etc that they had and was able to find.

  You can download the latest drivers from the following link for Windows 8:

  »	Microsoft Windows 8 (32-bit)
  	»	Microsoft Windows 8 (64-bit)

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update

• Update and now HP LaserJet 3390 printer will not work on XP

  I have an acer netbook.  Yesterday morning my printer (HP LaserJet 3390) worked and now it doesn't.  I made a stop down on my netbook and I remember the icon that tells me an update is available.  I am running Windows XP with IE 7.  I let him do the update and now printer is not working.  I am printing wireless via a router and a modem.  I reinstalled the printer and the driver have also downloaded from the HP website.  Any suggestions?

  How to uninstall it?

  Hello

  With Windows XP, uninstall an update from start > settings > Control Panel > recent updates (check the "Show updates" box at the top of the page and select sort by name) should be at the bottom of the list. Right-click the update that you want to remove.

  * But *... It is not a good idea to install the security updates. You should try to solve the problem without uninstalling the updates.

  Don

• Windows Update 8.1 - now my LaserJet P1005 printer will not work (AGAIN!)

  I have a HP laserjet P1005 printer, whose yeaterday was work happliy in window 8. I downloaded 8.1 last night and the printer no longer works!

  With the window of printer status open (through the control panal windows) the details of the document are displayed briefly when you click on the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on a laptop without problem.

  Driver Hp downloads link it "seem" a driver for the 8.1 but I think it's only version 8.0 wrongly labeled.

  I am sick to death with HP. It took them more than 1 year to untangle a driver for Windows 8, and it blocks as soon as Microsoft tweek their BONES.

  Does anyone have any ideas how this can be solved? HP seem to be abandoned as a fundamental value customer - I have not buy one of their products again.

  Hi again - finally got it works!

  I downloaded the software from the link... again. Still no joy

  Remove the printer from the computer devices. Then downloaded the link... again. The computer had the printer appears as a device.

  Then...

  I started again from scratch:

  Reinstalled the 'original' driver from the boot disk. (the driver from the link above must have still been present).

  Printer on stream.

  Very happy.

• Printer will not work after uploading NT4.0 on Vista 32-bit

  I tried to fix my Media Player, it stopped working when I try to open the wmv. e-mail files and came across something for nt4.0 driver so I down loaded to vista Home premium. Now I can't use my printer, I get the error message "driver not compatible a policy enabled on your computer that blocks NT 4.0 drivers (1930).

  Hello

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information I suggest you access the link below.

  http://support.Microsoft.com/kb/931719/

  Concerning
  Anthony.

• Lexmark X 8350 printer will not work on the new Windows 7 computer

  My new computer has Windows 7 and I can't get my Lexmark X 8350 to work, I tried to download a driver of Lexmark and it does not work.  I called support for PC World and the person said that I would need to buy a new printer, but in this day and age that's just seems stupid.

  Hello!

  Do not connect the printer to the computer with the usb cable. Try to uninstall all Lexmark software from your computer correctly by clicking on the Windows logo start menu > programs > Lexmark Series folder > tools > uninstall. Restart the pc. Also, check if your Windows 7 is running on the operating system 32-bit or 64-bit by clicking on the Windows logo start menu > right-click on computer > properties.

  Now, there is no driver Lexmark X 8350 specific for Windows 7, however, the Vista driver works. For the software, go to this link: http://bit.ly/cK7w07 (for 32 - bit) or this link: http://bit.ly/9pAWzM (for 64 - bit). Download and install the software. Follow the instructions. I hope this helps.

• HP Photosmart Premium All in One printer will NOT work to satisfaction with Windows 7, HP has been disabled

  Windows 7 is causing problems with photo printers?  I had so many problems the photosmart HP printer wireless installation.  Whenever it has been installed, the next time I arrived, he would say "cannot find printer.  Best buy told me to NEVER install wireless immediately and later another told me that Windows 7 seems to have problems with wireless printers.  Called HP, they wanted me to install new drivers and then I got fatal errors to try this.  Finally, they had a legal person of HP contact me to tell me that the fatal mistake had to be caused by the problem of WINDOWS 7.  I had to restore to the day, I bought the computer, which was fine because I didn't really have anything worth saving, just a few documents.  When I did, everything seemed OK but I tried to scan a picture and there were points on this subject.  I scanned the same photo to another computer not windows 7 and without stains.  New HP denounces Microsoft Windows 7... saying that it doesn't have the same problems as Vista did, but a WHOLE NEW CLASS of problems.  Why are they not being found and fixed by Microsoft problems?  It's so frustrating, I abandoned and resumed the printer at Best Buy.

  SOMEONE DOES HE HAVE PROBLEMS WITH THEIR PHOTO PRINTERS WORKING ON COMPUTER WINDOWS 7?  IF NOT, PLEASE SHARE WITH ME WHAT PRINTER/SCANNER, YOU HAVE, I WANT TO BUY A SIMILAR ONE.  I won't buy another HP for what, the customer service was poor, 12 hours on the phone and nothing has been resolved but blame Microsoft.  Life is too short.

  Have you tried the printer connected directly to the computer to see if it works correctly? This can help to identify what you need to solve the problems.

  Manufacturers of devices, in this case HP, are responsible for providing drivers for their equipment work. However, the end user is responsible for installing the drivers correctly. In most cases of printer drivers must be installed without the printer is connected to the computer and only connected and turned when prompted by the installation program.

  Also, during installation it is recommended to close all unnecessary programs that are running before installing drivers, and once installation is complete, make a restart.

  I have three printers on my system - two, a Canon Pro9000 and a HP DeskJet 970Cse printer (about 10 years) are directly connected to the main computer and have never had any problems. The third, a Brother color laser is connected through a network and is running smoothly. I do not use all-in-one printers and have a separate HP scanner.

  Depending on the type of team service geek places are concerned, you would be better to go to a computer repair shop and to solve this problem for you.

• HP1280 printer will not work on Windows 7 any ideas

  Windows7 tell me that the HP1280 is not compatible with the 64-bit system. Does this mean that all my old peripharals are obsolete, if so why didn't MS say this before buy us it

  Hi BRIPATBrian,

  If you are referring to the series of HP Deskjet 1280 printer, so it is compatible with Windows 7 64 - bit edition. You can download the drivers here .

  
  If this does not work, download the drivers for your HP Deskjet 1280 Printer series for Windows Vista and run them in compatibility mode

  Use this link to make older programs to run:
  
  Follow the steps in the link to run older programs in compatibility mode.
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the advice above do not work, contact the manufacturer because they are the best people to offer support.
  Manufacturers build many materials to make it work with the Windows operating system, this is why we cannot keep track of all the hardware devices and it is the sole responsibility of the manufacturer and not from Microsoft to develop drivers to make it compatible with the Windows operating system.

  Aziz Nadeem - Microsoft Support

• Want 4502 all-in-one printer will not work on Windows7 64 bit system, but it does on Windows 7 32 bit

  Have set up the printer on Windows 7, 64-bit network.  The computer knows all the drivers installed.  When we hit print it does nothing, the printing doc is not in the queue, it disappears.  I have another computer on the network running Windows 7, 32 bit and it works fine.  None of the HP help stuff works.  I suggest that HP is an incompetent organization... cannot be anything else if they cannot sell a printer working or may be troubleshooting performed.

  We have installed the disk drivers, download and with the help of Windows.  We have all uninstalled and tried again.  Always the same, does not work.

  Except if it can be fixed, will be back this weekend.

  BTW, my son is a COMPUTER expert and spent 4 hours working on it... HP has him $ 400 to $ 100 hourly billing rate.

  Thanks for the link, but I called HP support and they have uploaded a revised version of the software and it works now.  The strange think is that it is not available (allegedly)... just strange to me that they sell something that does not work on a 2 year old computer.

  If someone has trouble with the printer Envy 4502 and has a windows 7 (64-bit) operating system, call the support line and make them work by IT... don't waste your time.  Phone is 1-800-474-6836

• HP printer will not work after uploading student office 2010. I run windows 7

  Why my HP 1600 printer won't work because I downloaded student MSN Office 2010?

  Hi Gail,

  What happens when you try to print?

  Adding to Smittychat suggestions, please refer to the following article on how to fix printer problems using HP Diagnostic Tools for Windows

  Find and fix common printer problems using the tools of diagnosis HP for Windows

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Windows 7, hp printer will not work. should which driver I?

  New computer has windows 7

  My downloaded disk, hp psc 1300 series, series photosmart psc2400, hp officejet 5500 series. Windows 98, me, 200.xp

  LeRoy

  The driver for your HP PSC 1350v printer is already in the WIndows 7 operating system. Follow the steps outlined in the document below to install the driver:

  http://support.HP.com/us-en/document/c01796879

  The document also has measures to print and scan from Windows applications.

  I hope this helps.