Printer will only send jobs in Quebec City but does not print the

Similar Questions

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• 7520 photosmart e-ALL-IN-ONE seems to send emails from scan successfully, but does not work

  The scanner scans and appears to send the email successfully, confirms indeed e-mail was sent but can't

  Hello Annser,

  Welcome to the HP Support forums.  I understand that when you have used the scanning to E-mail feature of your printer Photosmart 7520 enamel never happened.

  For a real-time server update, please call the HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• My CD/DVD will read DVD and my os drive but do not read the CD or audio

  I recently restored my hard drive and now my cd/dvd will not play audio discs or software.  It will read DVDs and my os drive, but that's all.  any suggestions?

  Hi John,.

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can follow the steps listed in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

• HP 6500 709 has: will be printed computer, but does not copy the text to the glass screen.

  I tried hard reboot as an Advisor by the forum without success.

  The copy starts pulling on the blank paper and stops with flashing orange on Panel saying "on paper." Turning the power off, ejects a regular sheet.  I opened the back panel of the printer and alreafy. clean the roller feed tray with a damp, lint.

  Please indicate any other ideas to solve this problem in hp printer?

  I solved my problem and all facets of my printer are all works fine!

  This solution could help other members of the forum. I have connected a usb cable from the printer to the computer and opened the center of hp solutions and open 'Tools' and select 'Align cartridges' computer and this reset my operation of the printer and all resolved my problem reported. I have now deleted the usb cable and the printer is restored to normal wireless operation.

  A big thanks to the forum to allow me to think-out - of - the - box for a solution.

• HP Photosmart printer: transport stuck, makes terrible noise but does not in the book.

  HP Photosmart C5280. Transport makes a horrible noise, but cannot pick up any apper. What should do?

  It seems that there may be a foreign body stuck in one of the rolls, the transport route, or a gear is going/gone bad.

  Have you tried to remove all paper from the input tray and the control of the front of the rolls?

  Have you removed the back of the printer to ensure that nothing is stuck to the back of the unit?

  In addition, there is a document covering troubleshooting paper jams.  This may or may not be a paper jam, but the steps of troubleshooting for a noisy product will be the same.  Click here to access this document.  There is also a document to this printer which covers when the unit doesn't feed paper.  Click here to access this information.

  I hope this helps.

• Context menu "send link...". "does not launch the mail client

  It worked in Firefox 12, but with the last update for Firefox 13.x no mail client is started (mine is Thunderbird) what contextual menu item "send link...". "is clicked.

  I tried this with all the addons disabled but the same problem occurs.

  Does for you? If this is not the case, how can I solve it?

  I reported a bug if others have this problem.

  Thank you.

  I changed the setting Network.protocol - handler.external.mailto about: config at the default value (true) and that seemed to fix it.

  I don't know what changed before if.

• Will be using Firefox recently and I'm very happy with it. However this up-to-date Web site mybroadbandspeed.co.uk does not work. It displays but does not start the speed test. IE works fine. Any ideas please?

  Rebooted PC without result. The laptop has a wireless connection.
  All other wireless Internet connections work fine to this day using Firefox. Internet cable connection to the main PC also works OK with mybroadbandspeed.co.uk

  It's a Flash object then try to update Flash to the latest version via http://get.adobe.com/flashplayer/

  You should do it anyway because the version you have installed currently is a safety hazard. See http://www.adobe.com/support/security/advisories/apsa11-02.html

• Someone is using my email address to send messages, I ran virus/malware does not solve the problem

  Spam is sent from my email account. I ran Norton 360 and windows of scanning. Norton detected 45 threats and windows none, which tells me that my system is now clean. But the problem persists. What can I do next?

  E-mail may not be sent from your machine. Spammers usurp email addresses all the time. Nothing you can do about it.

• When I plug in a gamepad PS2 using a PS2 to USB, windows 7 knows it is plugged in, but does not recognize the guitar. Calibration will not do anything.

  I've calibrated without success. It recognizes the plug-and - pkay in PC, but does not save it.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Database will return no error, but does not delete the table

  Hello

  I'm developing an application that uses a database (SQLite). I would like to delete and re-create a table in the database (this table is the kind of a cache).

  When I run the following code, I get no error but chrome / ripple-> resources-> "Web SQL", I still see the old structure of the table.

  Do you have any idea what the problem might be or how I can solve it?

         db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Thank you very much

  Roberto.

  Hello Roberto,

  There was a problem with your INSERT INTO string where you have provided additional value which did not exist as a database column. Change

   oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd
  

  TO

   oPerson[i].Phonenumber + '", "' +  oPerson[i].Emailadd
  

  Here's a complete code that must run:

  var db = openDatabase('mydb', '2.0', 'Test DB', 4 * 1024 * 1024);
  var iUsers = 0;
  var oPerson = [{Firstname: 'Joe',
      Lastname: 'Smith',
      Phonenumber: '1800CALLJOE',
      emailadd: '[email protected]',
      Company: 'Photojam'},
      {Firstname: 'Jack',
      Lastname: 'Smith',
      Phonenumber: '1800JACK999',
      emailadd: '[email protected]',
      Company: 'Photojam'}
      ];
  db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Let me know if there are problems!

  See you soon,.

  James

• BlackBerry Q10 Q10 does not recognize the sender of sms

  I have a big problem.

  My Q10 is recognize my contact when I am called, but does not recognize the sender of the text message when I get one.

  Let me explain.

  I'm from Romania. The prefix for my country + 40 TR.

  Our mobile numbers starting with 07XX.XXX.XXX

  When you call from another country you put only + 40 then the number of laptop without the 0 (+ 407XX.XXX.XXX)

  In our country are 4 mobile operators (Vodafone, Orange, Cosmote and Digi).

  There is a situation when if you are called to another network, the number makes an appearance with the prefix of the country as + 407XX.XXX.XXX and my Q10 recognizes not the same if the appellant, it is in my contact list.

  Today, I noticed another BIG PROBLEM.

  So, I have in my contacts... John Smith with 0722.123.456.

  When I am called by him, it apears John Smith, but when I recive text message from him, it apears + 40722.123.456.

  My stupid Q10 does not recognize the contact!

  If I change the number on my agenda and I put + 40722.123.456 to John Smith, he acknowledged the sender of text, but it does not recognize the appellant (when I get a call from John Smith), it apears 0722.123.456.

  I used a lot of o phones: Nokia (many models), Iphone, Siemens, Samsung, etc, since 1996.

  I NEVER HAD THIS PROBLEM UNTIL TODAY!

  EVEN WITH THE OLD MODELS AND STUPID OF NOKIA!

  I CAN'T BELIEVE THAT THE NEWEST SMARTPHONE ON THE MARKET HAS THIS BUG!

  I HOPE THAT SOMEONE WILL ANSWER ME SOON AND GIVE ME A SOLUTION!

  P.S. the next week, I'll go on a hollyday in another country. What happens when I receive the call of my country and all my calls will be with prefix + 40?

  Probably, he recognizes no contact!

  You have this problem or if only my phone?

  The work-around, I have read other users is to include the number of the contact in two formats...

  Thus, John Smith would have one number registered with 40 +, and other registered without the + 40.

  BlackBerry is aware of the issue and I hope to work on it.

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.