printer wireless says its offline
I have a Macbook with OS 10.6. HP claims drivers are included in the OS. Printer works when usb connected. Does not work in wireless mode, says its in offline mode. Any suggestions?
The printer sees WIRELESS networks?
If this isn't the case, it could be the printer. We can deliver. On the front of the printer: Setup > tools > Restore Factory Defaults.
Tags: HP Printers
Similar Questions
-
My printer is saying its offline. I turned off & on, the wireless icon is turned on, as it is connected. That is to say that it is "ready". It worked yesterday. I have a LaserJet Pro CM1410 Color MFP. My internet works fine. All of the suggestions.
Hello
try to reboot your pc with the printer.
-
Printers HP d110 says its offline
Original title: HP printer d110
It says its offline and does not print anything I take it back. It's for my laptop, however the old computer in the other room, the printer works for one
If you have not already, download and install the latest drivers for printer you from:
http://www8.hp.com/uk/en/drivers.html .
(I see that HP Photosmart e-all-in-one printer - D110a drivers there to verify)
If this does not work, please tell us:
- your version of Windows;
- If you are using Windows 32-Bit or 64-Bit;
- the whole error messages.
-
My HPOfficejet j4680 wireless all-in-one printer error message says its offline
I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.
Yet, I just continues to be my what. Any suggestions? Thx John.
Hello JohnGeiser,
Take a look at following print references:
Open the printer TroubleshooterWhy can I not print?Find and install printer driversLet us know if that helps.Best regardsMatthew_Ha -
Why my printer always say its in offline mode and how do I change
I can barely get my printer to print from my laptop it says printer offline, but it is not checked, how can I get it online and stay there
The same thing comes from happening to me and I found the problem in a few minutes exploring. I use Windows 7.
- Go to the menu 'start '.
- Select "devices and printers".
- Double-click your printer
- "Click on the link above to the right that says ' printer: Offline"
- Click on "Printer" at the top left
- Down and uncheck "use printer offline".
It worked for me... I thought I was going to have to do a system restore or something more complicated if it does not work... certainly don't want to buy another printer on a technical glitch! I hope this has solved your problem!
-
Printer wireless connected but offline with new router Xfinity
A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer. Just replaced FIOS with Xfinity Cisco router. Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark). Printer has set the IP address with FIOS router. Running doctor printing & scanning HP without success. Suggestions? Thank you!
Replacement of your wireless router try here.
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
-
HP Deskjet problem - wireless printer appears always in offline mode after reboot
I have a printer HP F4580 wireless who constantly disconnects forcing me to plug in the usb cord to be able to print.
I uninstalled countless times and after each reinstall everything seems fine, I can print all day. In other words, until I have shut down for the day.
At the re-start and I try to print - it's new offline and back leaving the usb cord.
How the hell can I run wireless ALL the time?
Help please.
You say that your problem is with an HP printer? Suggest that you ask for help with the HP Technical Support.
Here: http://welcome.hp.com/country/us/en/support.html
HTH
-
OfficeJet 8500 wireless printing through Airport Extreme = 'offline', how to fix?
I know this question has been asked below, but it seems that everyone's situation is a little different.
I have a MacBook using OS X 10.5.8. I had this printer the other day & everything seems to go well except wireless printing (I can print with USB connected to the computer).
The printer appears in Airport utility (and I even tried the remove all printers & add this a trick I've seen suggested in other posts) and in my programs as an option for printing but when I try to print wireless it says "offline".
The printer is not 'asleep' or into hibernation or anything like that.
Can anyone offer a solution that is not too technical? I know not all the computer jargon. Thank you! I intend to return it for the one with the wireless built in so I can't fix this pretty soon.
Oh, the 909 a doesn't have wireless. You plug it into your airport with an Ethernet cable. It will automatically get an IP address when you plug it in.
-
My printer is saying print error and now it says offline. Help
I have a printer 4620. I'm not on wifi and have a cord attached to it. My printer is saying error not printer offline. The printer was working yesterday and not today. Help
Try the mentioned step below, which should solve the problem:
1. go on devices and printers
2. Select the printer that you have problems with and do a right click on it and select printer properties.
3. Select the ports tab.
4. Select Configure port.
5 uncheck SNMP status enabled and click ok. -
off message on my c510 estn paper
I have problems printing wireless to my C510 estn. I get an error message that says: I'm paper when I did the paperHello
1. what operating system is installed on the computer?
2. were there any changes (hardware or software) to the computer before the show?
Perform the steps in the article mentioned below and check if the problem occurs.
Hope this information helps.
-
Technical support Epson says that my new Stylus Photo R2000 does not print wireless in my permisions o/s Microsoft.
My Toshiba Laptop Windows XP Media Center OS is currently being updated with the exception of a point to update MS Office 2003 #KB949074
has no size to him.
Please notify.
Kind regards
Adolph Moret
A call back to Epson says my Windows Firewall blocks printing Epson Status Monitor and by disabling the firewall every thing returns to normal. Turning on the firewall without exception is still no difference and I should contact Microsoft for that matter.
If the application works when the firewall is disabled, but not when the firewall is turned on, so you must create an exception for the application.
I don't know what you mean by "turning on the firewall without exceptions still makes no difference" - no difference of what?
You must determine the name of print Epson Status Monitor, then go to control panel > Windows Firewall (if your control panel is using "Category view", you will find Windows Firewall in the Security Center).
Once in the Firewall dialog box, click the Exceptions tab, click the button "Add a program" and find printing Epson Status Monitor. If it is not in the list that appears, click on the button "Browse". After selecting the program and click OK, make sure that on the general tab of the Firewall properties dialog box that the "do not allow the box exceptions" is NOT checked.
-
HP Officejet 4500 Wireless all-in-One Printer G510n is always offline
When I try to print, the Officejet 4500 G510n Wireless is always offline and will not print.
I clear the buffer of characters and reset the printer by turning it off and back on.
Then I right click on the printer icon and select printer to use online.
After that, the printer works normally.
My question is, why he continue offline?
I do this procedure whenever I want to print.
I am running Windows Vista 64-bit and the printer is connected wireless.
I checked HP updated software downloads.
The available software is dated January 2010.
I already use this version.
Any suggestions will be greatly appreciated.
Hello
Please use the following advice/instructions to correct:
http://support.HP.com/us-en/document/c02221706
Kind regards.
-
trying to install my new printer wireless, keep saying
Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.I'm not running in safe mode...Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...
-
my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?
dougnatz,
Try to run delete print jobs to remove all blocked the queue print jobs.
Rick
-
I don't understand the disconnect. It will print wireless but not scan from the glass or the document feeder.
Diane,
Please contact the Microsoft community.
It must be difficult because the printer does not work as expected.
I would like to refer to these articles for assistance more-
http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&product=5199463
http://WWW8.HP.com/us/en/troubleshooting.html
Let us know if it works for you.
Maybe you are looking for
-
Transfer iPad App Photo Photo Albums Macbook?
I don't know how to transfer pictures to Macbook from iPad. I can't understand how to transfer my created iPad application of Apple's Photo albums. Is it still possible?
-
Keep getting this error code but WU remains in default; updates are: Update of security suites for Microsoft Office 2007 (KB2687311) Update of security suites for Microsoft Office 2007 (KB2687499) Update of security suites for Microsoft Office 2007 (
-
I have problems with my Hp Pavilion Windows Vista computer. The main buttons that are used for volume control, button shortcut MediaSmart, mute and LAN wireless button that are all on the upper part of the keyboard next to the power button do not wor
-
How to remove a ripple on Win7 64 bit SQL database?
I just started creating a SQL database for phones BlackBerry application and I have a lot of questions that I can't find answers to and I'm fighting with determination solutions. I work with: -SDK WebWorks 2.3.0.9 -Waving 0.9.0.16 -Windows 7 64 bit I
-
BlackBerry App do not displayed
I have download and install BlackBerry_JDE_PluginFull_1.1.2.201003212304 - 12.exe and developed an application in the Hello world. I tried to run on the device Simulator 8900 BlackBerry-SDK. When the Simulator is booted, I found that the application