Printer with Windows Vista installation issues?

I recently had the hard drive on my Compaq CQ50 replaced.  I am running Vista Home Premium.  I went to the respective websites of the manufacturers of my printers and downloaded the drivers for them.  Printers have been installed according to the "Assistant", but I'm unable to print using them.  I get the message to install the drivers for the respective printers whenever I get on the computer, but he does not see the printer drivers which I downloaded earlier.  I have installed and uninstalled printers, deleted the printer and re downloaded drivers without success.

try restarting in safe mode (with networking) to do the installation/activation.

Win7 start in safe mode - http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode - please let us know if works or not.

Tags: Windows

Similar Questions

  • Windows vista installation issue

    Serial number in my cell phone will work with any language version of windows vista?

    Hello

    Normally windows language versions must be purchased from Microsoft.

    If the operating system that you are trying to put on your computer is not the same that the one supplied with the machine, then it won't work.

  • Printer does not work with Windows Vista

    My HP Deskjet2540 all in one printer will print with windows vista. Ive tried printing from excel, works and all I get is a blank sheet. Sometimes I get some very weak marks. I have a lot of ink, I uninstalled and reinstalled only to get the same result. However, I can print something on the internet and I can print a test page. I get no error message.

    Hi cat22,

    Thank you for visiting the Forums from the HP Support! I see when you print from Excel to your HP Deskjet 2540 printing comes empty or with very weak lines. You have a lot of ink, and you have no problem printing from other programs. You tried to uninstall and reinstall the software without success.

    I would like to first you attempt to change the quality setting, you can have currently set to normal, we will try to print in optimized mode and see if that helps:

    1. go to your Start Menu

    2. go to your devices and printers

    3. right click on your DJ 2540 and navigate to Printing Preferences

    4. click on the paper/quality tab

    5. Select the best mode

    6. click on apply

    Now try printing from Excel, you still get blank pages? Please let me know the results if you are still running into errors let me the following information:

    1. What is your current operating system, Windows or Mac and what version?

    2. What is the connected USB printer or wireless?

    3. are there any exceptional computer upgrades that have not been installed?

    I hope hear from you soon.

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • How can I get a Dell A920 printer become compatible with Windows Vista?

    I have programmed a Dell A920 to print from my laptop Windows Vista printer.  It worked, but when I try to print something I get an error message indicating that the printer is not compatible with Windows Vista.  How can I get compatible?

    Hello

    Download and install the latest Dell Vista drivers;

    http://www.Dell.com/support/drivers/us/en/19/product/Dell-920

    See you soon.

  • What hp c4180 printer compatible with windows vista

    We have a laptop with windows vista. Can load us a HP c4180 printer?

    If it's the HP Photosmart c4180 then there is full Vista drivers here:

    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=1141647#N191 .

    Make sure that get you drivers 32 or 64-bit according to your version of the Windows.

    * To see if you're running 32-bit or 64-Bit Windows click:

    Start-> Control Panel-> system

    Then look at where it says, "System Type".

  • Compatibility issues with Windows Vista Business

    Could not install Oracle 10 g/Microsoft SQL Server 2005 on this 32-bit machine. Windows Vista Business.It is machine Lenovo Thinkpad with 3 GB of RAM. Installation ends abnormally. Can install Oracle/SQL Server 2005 on Windows Vista or should I change to Windows Xp professional? Are there problems of compatibility with Windows Vista Business? How should I upgrade so that I can install Oracle/SQL Server etc for my development/practice work?

    Context/Back ground - as a developer I want to make some practices in Oracle 10g, MS SQL Server on this computer. I have the licensed version of Windows Vista on this Lenovo Machine. Please tell me how I can upgrade to Oracle, SQL Server etc can be installed on this machine.

    Thanks for your suggestion.

    Pratim Chanda Pankaj

    India

    Hello

    The question you posted is more suitable in the TechNet Forums. Please post your questions in the Microsoft TechNet forums to improve the assistance.

    Here is the link: http://social.technet.microsoft.com/forums/en-US/category/windowsvistaitpro/

  • HP Photosmart D110 printer will not install with Windows Vista?

    HP Photosmart D110 printer will not install with Windows Vista?

    Hello

    (1) what happens when you try to install the printer?

    (2) you get an error message?

    Method 1: You can run the fixit available in the link below and check to see if that makes a difference

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    You might want to know

    Add or remove a printer

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • printer compatibility with windows vista 64-bit home premium

    When I installed the software for an hp 5650 printer on my dell xps with window vista 64 bit family premium, I received a message stating that the operating system was not at a minimum level for performance maximum printer.  I printed a word document and photo, and they seemed very well.  What does the message mean?  Y at - it a upgrade for my os should I download?

    There is no upgrade of the software of the printer.
    HP wrote the software and drivers, not Microsoft.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01655752&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=304445

    Link above has HP workaround for problems with it.

    See you soon. Mick Murphy - Microsoft partner

  • I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    Right-click on the setup.exe > run as admin.

    See you soon. Mick Murphy - Microsoft partner

  • Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

    Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

    On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

    Hi Gordon

    I just downloaded drivers from the Dell website in support of xp

    I have tried to reboot from the XP cd but got the following message when I tried to install

    "This program is blocked due to compatibility issues"

    Program - the installer of Windows

    Editor - Microsoft

    Location: D:\1386\winnt32.exe

    Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

    I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

    You say that you have started from the XP CD, but something is wrong with that
    you do. Just boot from the CD and follow the prompts for a
    clean install. A new installation by formatting the
    drive and does not care what version of Windows is installed (or
    even if any version of Windows is installed.

    Ken Blake

  • version 2.0 SlingPlayer Setup Wizard appears incompatible with Windows Vista

    Setup in Windows 2.0 Wizard Slingplayer seem incompatible with Windows Vista (it is compatible with Windows XP) after Slingplayer 2.0

    opens, nothing appears in the installation wizard when you click it.

    Hello

    Welcome to the Microsoft community. I see that you have some problems with the slingplayer version 2.0 Setup Wizard. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. you have a 32-bit version or the 64 bit version of windows?

    3. have you made changes on the computer recently?

    Minimum requirements for SlingPlayer 2.0 for Windows: http://support.slingbox.com/get/KB-1000076.html

    Method 1.

    You can run the program in compatibility mode and check if that helps.

    Make older programs run in this version of Windows: http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows

    Method 2.

    A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

    Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

    Additional information.

    SlingPlayer for Windows (legacy desktop version): http://support.slingbox.com/go/slingplayer-windows

    I hope this helps.

  • hard drive is seen in bios but not in windows vista installation

    Hello, I have a hp ze2315us pavilion which is also a hp pavilion ze2000 cto, I have 1 GB of ram, a disc 60 hard IC25N040ATMR04 Go-0-(PM) and it is part of the bios and I had vista installed previously, but there was a corrupt file so I formatted and deleted the partition so there is all the space unallocated, then I restarted the computer and the disk still appears in the bios , but when he said where would you like to install the operating system it says theres no HDD found please help! Also, I try to install vista home basic 32-bit edition

    Hi hp pavilion ze2000 cto.

    Thanks for posting in the Microsoft Community.

    I understand that you are facing the issue with the hard drive in the bios but not appear in the windows vista installation.

    Given that the problem is related to the BIOS and a hardware malfunction as possible, I suggest you to contact the manufacturer of the computer for further assistance regarding this issue.

  • Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

    original title: problems with Windows VISTA update

    I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

    1. 9 47 code
    2. Code 800070002
    3. Code D 80024200.

    Is there a resolution to do the same thing?

    Hello

    Did you change your computer?

    I suggest you to follow the methods and check.

    Method 1:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Method 3:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    http://support.Microsoft.com/kb/947366

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • Problem with playing video games, DVD and CD audio with windows Vista.

    I had a problem to read these types of discs with my hard drive. It does not recognize that there is a disc at all. This ONLY happens with new discs I get, for example by trying to install a new video game or download a new album that I just got. If I want to play a previously installed game I put game disk in and it works perfectly fine. This only happens with new games that I have not yet installed. E.g. I want to play starcraft, previously installed. I put the cd in starcraft and the game appears as usual. But if I want to install starcraft II nothing happens when I put StarCraft II in the disk drive, even if I go to my computer and double click on your drive, it just opens the CD door and asks to put a disc in when we're already here.

    I tried MR. Fix and it recognizes that there is a problem but is unable to repair. I tried to uninstall the disk driver and not the fixed not restart, but who either.

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
    and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    A CD/DVD cleaner might help.

    -----------------------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Tecra S1 is no longer unexpected

    We have 5 of Tecra S1 and my only just died suddenly. No matter what I try, the machine will not restart or even reading the hard disk. I swapped the hard drive to an another S1 and it works perfectly. This failure would be heat related? Or is it lik

  • 840 M6u35aw G2 #abh: HP 840 G2 no sound after reinstalling windows 10

    Hello Had to reinstall my OS and for some reason I can't get audio to work. I tried to update the latest drivers (realtek hd audio) and even tried older drivers, but I can't not all sound on my laptop. Before reinstalling my OS (win10 64) evereything

  • How to install XP on Satellite L40 - 14N

    OK when I got this laptop for Christmas had installed vistaI would install XpRead only a few threads on here, but can't have it installed. I have read that I need a floppy drive. So went out and bought a USB floppy drive to the drivers.I thought I'd

  • My RAZR made me unhappy :(

    Tethering does not work (USB and Mobile)Smart Actions another disappointment:for my main characteristic it's dependent relaxation on the spot, but when I try to add location the thing is seen is: no location significant to display without buttons and

  • Movie Maker: Publising movie on computer crashes!

    I'm trying to publish my movie on my computer, but when it gets to 40% is getting stuck and minutes add up and it does not come off 40%. Someone at - it an idea what is the problem?