Printer XAU2511 media

Similar Questions

• USB not installed correctly, print USB media, mass storage device USB Composite device

  I am running XP and I get these 3 messages peripheral USB Composite USB and USB Mass Storage Device not installed correctly print media. What should I do? Thanks for any help.

  Have youre pc hardware written info if necessary (chipset), & its mfg (intel, amd, etc.).

  go to the website mfg, downloads, get the chipset Chipset youre Installer and install it.

  This gets you drivers/software for sound, USB etc.

• HP D7360 print avery inkjet labels 8663. Printer dismisses media is upside down. It is not the case!

  HP Photosmart D7360

  Mac OS X version 10.7.2

  Try to print remove shipping labels. Printer refuses and tells the media is backwards. It is not the case.  When turning on the printer paper print, but the wrong side of media.

  Hello

  I have already heard this with avery paper, I thibnk its caused by the mark on the paper, if I remember correctly a blue logo on the top of the paper. Try this as a test, cover the blue logo with a thin strip of white paper, so stick on or cover it with Type-ex.

• XP SP3 / print USB media missing from Device Manager - Bus USB controllers.

  When I try to add a printer HP1022 computer by adding hardware wizzard there is No showing USB port for me to choose. All USB ports work because I can plug in a USB key on each port and the ports work fine.

  If I try to add the printer through devices and printers , and then click Add a device , I still have the same problem.

  I stopped the spooler and copied again USB?.? files into the Windows\System32\drivers folder since an exact dupicate system and restart the spooler and still unable to add the printer.

  I tried installing the HP Driver package downloaded on the HP Site and still can not the printer.

  I'm going to try us the HP Full Download for this printer see if it will work.

  I saw on another site, a suggestion to delete USBPring.sys and USBMon.DLL and let XP replace those.

  Any other suggestions?

  Deborah

  I solved this problem. I ran sfc/scannow and let the computer to replace the corrupted system files.

• Printing on non-standard media

  I feel like 100 D410, and I would like to print on media 4 "x 8" (10 cm x 20 cm). Printer support options do not seem to support this. Y at - it a tip or landmark, please?

  Hello

  Normally the printers have an option called "Size" custom Please check this option, if it is not in the list, which means that your printer does not support this.

  Kind regards.

• Is it possible to print a playlist from Windows Media Player 12?

  Is it possible to print a playlist of media player12?  We want people to know this song is played when during the marriage. I really don't want to type everything out!

  original title: print a media player 12 playlist

  Hello

  Natively, Windows media player does not support printing selection Windows media player.

  You can use your favorite search engine and try to use a third-party software and check if that helps.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• CC of Photoshop can't save new preset print - guard returning to bad media? Help, please!

  I'm trying to print on Moab Entrada Rag Bright 300 from 2014 CC Photoshop on my Epson 3880 printer.

  I loaded the right profile of Moab and have it selected in the title of the color management > printer profile in the PS print settings dialog box. The 3880 is that the printer selected in the printer Configuration.

  When I open the print settings dialog box, select 13 x 19 as the paper size. Under the printer settings > Page Setup I select manual - back and under the printer settings > Media Type choose watercolor radiant white paper as specified by Moab for my paper.

  Under Presets, I select Save current settings as a preset, give it a name and click Save.

  Page layout displays immediately introducer sheet instead of manual - rear and the Type of media as Ultra Premium Photo Paper Luster, even if the new custom preset name is displayed as the selected preset.

  What the heck missing am me?

  You speak of a function of the driver software Epson contact Epson.

  Photoshop uses only the page size information provided by the printer driver.

• HP Officejet Pro 8000 Wireless: Unable to print labels on my HP Officejet Pro 8000 Wireless color inkjet printer

  Hello Forum,

  I don't want to appear redundant, however, I always have the same problem, cannot print on different media (for example. Labels, Matt / glossy papers, etc.) other than plain white paper. As I said in my original post (below), I tried different settings, different programs, etc., without any result. The printer does that pass through without printing media, leaving the error / blinking yellow light.

  I believe that this printer is able to manage different media other than paper white just to 'stick '. Again, I ask your help to solve this problem. It is and has been, very frustrating trying to overcome this restriction of printing!

  Thank you all!

  (Original post)

  I can't get my HP Officejet Pro 8000 Wireless inkjet color printer to print CD / DVD labels. I have tried various printer / paper options but the printer just feeds the media (in this case 'Fellows' brand matte CD 2-top) then spits it right back with result error amber light flashing.

  Printing has a sensor that determines if the paper is loaded and feeding properly into the printer.  If you print on media that is colored or printed features we can confuse the sensor.

  One thing to try - cut a strip of the sticky part of a post-it note maybe 1 "wide by 1/4".  Attach it to the top left of the sheet of labels on the side to be printed, the long side on the short side of the paper.  This will then put face down into the printer, with the band on the upper right of the tray paper.  After printing, you can remove it and reuse it for the next page.

• 477dw Pagewide Pro MFP: MFP Pro Pagewide 477dw tries to print to tray 2 documents and envelopes for Tray1 in word 2010

  Set up the new printer and printing from Word 2010
  Printing documents to default tray 2 works fine, but when you try to print an envelope in Tray 1 it always says that we must put the envelopes in tray 2 even if in the shortcuts in printing preferences, we have selected 1, tray with envelopes, for this document.
  Also tried auto select paper source and no change.

  What would be ideal, that's what we had with our old HP printer where you click on print and it went to the default (tray 2) Letter/A4 paper tray, but if you put something in the manual feeder (Tray 1) it would print automatically on this site until he missed and then switch back to the main tray (tray 2).

  Pulling my hair out over the new printer so any help would be greatly appreciated.

  BTW.
  Tried to file a case of pension, put in the serial number and it says this product not supported by this site, click here to go to HP enterprise.  Tried to submit a case of pension to enterpise and got the same message pointing me back the first page, so just round in circles, I can still apply for assistance.

  Hello

  I understand that you are having trouble with printing to different trays on a PageWide Pro printer. I want to help you with this. There are two pieces to this puzzle - the printer settings & settings on the computer (in an additional post, I'll add more details)

  PageWide Pro has the ability to support your ideal scenario.

  What would be ideal is what we had with our old HP printer where you hit print and it went to the default letter/A4 paper tray (tray 2)  but if you put something in the manual feed (tray 1) it would print automatically on that instead until it ran out and then switch back to the main tray (tray 2).
  

  The printer settings

  • Tray 1 set to any size and any Type
  • Configure tray 2 (+ other trays) to the paper size and type in the status bar
    • Configure the status bar by opening / closing the tray and using the size/Type prompt - provided it clears any existing stored measured value.
  • Manual feed set to OFF (manual feed replaces the Printer Auto Select Paper Source setting) (not a factor based on your description)

  Driver settings

  • The important thing is that your print job is sent using the configuration of driver Paper Source>printer Auto Select.
  • Make sure that paper in the word document settings match the status bar settings previously configured on the printer

  At the beginning of the print job, if the media is present in the Tray 1 (Any/Any value) and the print job is sent "Printer Auto Select", tray 1 we'll pick first until the media runs. (The printer will assume that you have placed media in Tray 1 which corresponds to printing)

  However, if the media is placed in the Tray 1 in the middle of a printer Auto Select print job, media will be very probably not selected. It is important to maintain the consistency of the size of the print media & type.

  Kind regards

  Jay

• Print settings Pro - 10 - you can print edge to edge on paper Fine Art?

  I have a printer Canon Pro-10. We know that in the printer settings if you set the Type of media to a fine arts paper then the driver applies a margin of 30mm printing. So if you try to print from Lightroom, but have margins of 10 mm, it refuses to print until you change something.

  Now I can get around this by setting the media type on a photo paper so I could print the edge on a paper fine art.

  My question is;

  I can set the paper size in the Page Setup dialog box, I color managed by Lightroom and I actually use the right ICC profile for the paper and printing, this media Type setting does nothing with regard to printing? I printed some impressions on canvas and I see no difference in print quality?

  Control color ICC profile. Media type controls how the ink is expected. It has been my experience that as long as you select a similar surface types everything comes out fine.

• Cannot use manual feed, cannot print until reboot

  Recent computer replacement, went from XP to Windows 7.  Same old Laser Jet 4000 since 1998, however.  It still doesn't seem to get along with Windows 7.  It is installed with only a local connection (there is no ethernet connection available at the back of the printer.)  Windows detects that it's here, acts as it should work.  Installed by plug & play, driver told me a USB printing Support has been installed, & name of the HP LaserJet 4000 Series PCL 5 driver.  My printer serial number is USMB290030.  With XP, when I wanted to use the manual feed printer to print on envelopes & letterhead, the option was always there through the Properties menu of the printer.  Now, the option feeder manual seems to be there for printing envelopes (Microsoft Word), but not for printing format letter.

  Oh, Yes, and it does not print anything until I restart.  I tried doctors convenience stores/printing HP and Microsoft.  Search in the forums, search the Web General, tried to unplug the USB and re - connect the new computer.  The HP scan doctor said that print USB media is not installed, even if installs it plug-and-play.  The HP Scan Doctor sent me to a generic website for downloads get USB print media, and I can't find a USB print media when searching for it.  Get current on all Windows updates.  HP told me to get the driver through Windows Update when I try to get (or update) through their website.

  TI guys said maybe it's because it's USB & connector cable is the old sign in parallel at the end of the printer & USB PC and the old printer side is faced with USB, but his computer is Windows 7 for a long time and there the same printer model (in fact, we have 6 of these 4000 series to the office & the rest seems to work.)  We have also recently updated our network from Server 2003 to Server 2008...

  Please, any suggestions?

  Installation of the universal printer driver for Postscript (version 6.0.0.18849) of

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=503483&swLangOid=8&swEnvOid=4063

  subsequently worked.

  Thank you!

• LaserJet 400 M401n local printer problem

  I work for a company with remote office environment.

  We have just recently swtched to a new model of small laser printer for the use of the local printer, and I have problems with the first we set up. The LaserJet M401n first was the installation of one of our field technicians program. They connected the device via USB for users HP Elitebook 2540p on docking station and installed the printer using the software from the cd provided and it worked fine.

  End user required to move the printer away from the office, so the USB and power supply were disconnected from the printer and it has been moved and reconnected. After that, the computer showed that the printer is offline. Option of printing of the disabled user, but every time jobs have been sent to the queue, offline they errored quickly.

  I worked with the user remotely and deleted the printer in printers and faxes and print driver from the options in the server properties in this window. I had the user re - connect the printer, but it was not to recognize that something has been connected.

  I went into Device Manager, but I don't see any options to print USB media or DOT4 print media (which is usually the virtual USB port.) There were several devices named "USB Composite Device" and a device called a "USB Mass Storage Device". There are no data storage devices or memory cards connected to the laptop. After removing everyone from the Device Manager, I had the user he disconnect/reconnect the USB from the printer. At this point, the printer has been recognized as connected and adding hardware wizad came. At the same time, a HP Installer utility began. I checked in my computer and there is a removable storage device that provided this installer. It seems that this printer can be a memory chip that contains the software and drivers required.

  I used the HP Installer and installed all the software and drivers, and the printer started working again.

  A week or two later, the user has contacted me and the Office has had some changes made, then the printer must have been dissconnected and resumed contact with a long USB cable. The same problem resurfaced. The printer is connected and even shows like ready. Jobs fail when submitted, and reconnect the cables or rebooting doesn't fix it.

  At this point, I wiped out all the HP report printer software and drivers, removed something that looke HP printer partner since the Device Manager, unplugged the printer and restarted the computer. I connected the printer after the restart and inserted the CD that came with the printer. I used Device Manager to install the printer driver and the print media files on the CD USB (I had to close the HP Installation Wizard about 10 times more it kept popping up). At this stage that the printer has been installed and operational, but when logged in with admin account, the printer should always be prompted for the HP installation software that seems to be running from a USB device stored inside the printer. Which is not "very important, but when I looked at the same way of dissconnected and reconnect the USB cable from the docking station, the printer has stopped printing again.

  The laptop is a HP 2540p with a docking station. He seems to have the same problems when we use one of the USB ports on the docking station or the laptop itself.

  In our company, we run a range of McAfee as VSE, MEE, MEE/PBA, DLP products.

  I will try to upgrade the firmware of the printer and the laptop BIOS. I also asked for one of this model of printers be ordered for our test lab see if we can reproduce the problem on other machines

  Ideas or recommendations would be appreciated.

  bigbankitguy,

  You mentioned that the printer is connected via USB, is that still OK? I want to try the following:

  1. disable Smart Install via the control panel. (Small icon tool and equipment) Configuration menu > Services > scroll Smart Install > DESACT

  Restart your computer and see if that solves your problem. If you continue to have problems, try the following:

  2. go into your task manager > Services tab > click on the button in the lower right of Services > locate HP DS Service > set to automatic; If stopped and then start the service.

  Restart the computer.

• The printer Officejet Pro Premium N911n 8600 performs the selection automatic tray?

  I have a printer Officejet Pro N911n, CN577A Pemium 8600 to two trays. My operating system is Win8, 64-bit, there is no error message, no change in System.

  The HP Officejet Pro 8600 e - all-in-One series User Guide indicates that by default, support for prints of printer from the Tray1 Tray1.If is empty, the printer draws media from the bac2 (if it is installed and loaded with media. I have tray lock disabled, Tay1 default tray and automatic selection of the active status bar. Before these selections, I contacted HP email support to report this option did not work. I received a response that there is no method that automatically selects a tray when a drawer is empty. Manual States the user otherwise... This option may not work, but it is part of this series of printers. I have the two charged plates and I will determine if it works after that Tray 1 is empty. Does anyone have one of these printers and auto function set work? Thank you.

  Hello wardell1,

  Please take a look at this document and I would like to know if the troubleshooting steps to help you solve your problem.

  Good luck!

• HP Deskjet 500 printer setup for Windows 7

  Just bought a new computer with Windows 7 64 bit Home Premium edition (no parallel port), but can't get the old Deskjet 500 working despite reading all internet posts, of the solutions.   I hope someone has a story to share.

  I bought a USB / parallel, as many have suggested on the web.  The cable has been properly installed by Windows 7.  It appears under "Devices and printers" upward as IEEE-1284 of print USB media controller.  I then "Add a printer" and select USB001 (virtual printer to USB port), then select HP Deskjet 500.  Window 7 seemed to install the driver successfully seeing the icon of the printer with the 'green' checkbox

  However, when I try to print a document, the document in the queue of the printer as "print...". "but get nothing printing.  Then after a minute or two, the printer queue message becomes "error - printing" and the icon of the printer goes 'green' checkmark to the triangle "yellow!"

  Any help is appreciated.

  HP may have their own support stuff. Here's a tool that their site made for you: http://h20614.www2.hp.com/ediags/gmd/index.aspx?lc=en&cc=us. If this does not work, contact them based on your template: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-005&h_lang=en&h_cc=us&h_product=14588&h_client=test&lang=en&cc=us.

  BTW, different models may behave differently, as printer of Melcom might be more happy to oblige you.

• Canon MP610 CD Label Print on Win 7 - "no printer found".

  Have a Canon MP610 which worked without problems on Vista. Acquired a new Acer all in one computer with Win7 and installed printer. Prints OK, vainly analysis software and software CD printing. The drivers downloaded and uninstalled and reinstalled for 64 bit win 7 - same mistakes. From LabelPrint, it reports "a compatible printer for printing CD media was not found.  Don't know what else to try.

  Have you installed all the win7 64 bit downloads available from the Canon site?

  http://USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp610#DriversAndSoftware