printers and all UNITS

Similar Questions

• HP Photo smart 5510: printers and all UNITS

  After scanning, the background of the page came in gray and not in pure white.

  So I was running the printing software HP and doctor Scan. The gray background problem solved but new problem started. After scanning left and upper paper edge is done with a thick black border. This problem wasn't there before execution of the HP Print doctor and South American.

  I had re - run the same software, but this dark page border problem continues.

  Must enjoy getting the solution.

  Concerning

  RTP964

  Hi @RTP964,

  Welcome to the Forums of HP Support!

  I understand that you are unable to scan without border around the images. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would ensure that the printer gets the right amount of power.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Make sure that the scan cover is closed so that the light can seep into the analysis.

  Also, please make sure that the "scanning area of any" selected in the settings of scanning, non-personalized.

  Please see the pictures below.

  

  

  If you're still having problems, please post a screenshot of an example of scanning and your scanning settings.

  Confirm that you are able to make a copy without it producing the border.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• I have two HP printers and all often, I get a message that there is no printer

  Original title: from time to time, I get a message that there is no installed printer. I have two printers. I have to turn off everthing and restart the computer. Printers appear in the control panel

  Printers are both HP

  C7280

  F4180

  Hi June, Col.

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  Method 1:

  Try the Fixit printer mentioned in the link below and check out them.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Also try to uninstall the printer and try to install one at a time and check.

  You can uninstall all the printer drivers, programs and features as well as Device Manager.

  Method 2:

  Step 1:

  Uninstall the drivers from programs and features.

  a. Click Start.

  b. type appwiz.cpl in search, and then press ENTER.

  c. find the printer driver packages, right click and uninstall both packages.

  Step 2:

  Then uninstall the printer since also Device Manager drivers.

  a. click on start

  b. type devmgmt.msc in search

  NOTE: Click on view the hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.

  c. you find devices to printers, right-click on it and select the option uninstall

  After the uninstall, try to install one printer and check if it works. If it works, then try it with the other and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printers and Devices__

  Printers and window unit empty mouse Bt & printer still works fine. It's Bt support disabled function OK I set to auto start the service and everything is good check the printing and associated services spooler service it all running. BUT when stop & restart Bt support service defalts to disabled # the service will be configured to stay any average form I know & I tried several. I am running windows 7 install on 3 months computer laptop asus X71SL thanks for all power back JOE!

  Hi Joe 2010,

  It is possible that the service is corrupted. For now I would say allowing you to run the Analysis System File Checker and see if it can find any corrupt files and replace the same.

  Follow the steps below to do the same.

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  http://support.Microsoft.com/kb/929833

  As suggested by Gokul T in response to your previous post, have you been through the wire in the below link for the instructions of John Cena who seems to have solved a similar problem.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/cc31cf75-99f1-48e3-af2f-f628f9907c7a

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pro Tips: Troubleshooting scan to E-mail questions in e-all-in-one printers and ePrint

  Hello e-all-in-one printer users,.

  If you're reading this, chances are you have a problem of webservices in your HP e-all-in-one printer. If you can not scan to e-mail, use ePrint, or get a code application, this post is for you.

  Many of later vintage (2010 and beyond) Photosmart, ENVY and Officejet series e-all-in-one printers share the same Web services and Wireless features. Within these series printer, you can enable wireless and Web services (ePrint, scan to e-mail, printable sheets) connectivity of the façade do their installation for use with Android, Windows, iOS, Macand Chrome OS much simpler than the old printer models. Of course, when things go wrong or there is confusion about the use of the printer and features such as printing and scanning to e-mail stop working, the correction of these problems is the same in most of the models.

  WebServices are not connected: what affects?

  When the webservices connectivity is lost ePrint, scan to e-mailand pads features will stop working. If you are just getting started with the installation of your printer, the inability to generate a code application (to add your connected HP printer or sign in to Instant ink) can be attributed to not being able to afford Web services. If you are affected by any of these questions, read on. I have some suggestions that might help.

  Ordinary remedies

  • Before set you Web services, make sure that your printer is connected to a network, either via an ethernet cable or Wirelessconnection. Print a report of Network Configuration of your printer front panel (usually this is located under Tools / reports) to confirm an active ethernet connection.
  • If you are connected wireless, touch the wireless icon printer . If you see as connected and there is an IP addresses starting with 192.168... or, 10 grand. If this isn't the case, run the Wireless Setup Wizard to connect you with your network name (SSID) and enter the password wireless you are prompted.
  • Ensure that the date and time your printer settings are correct. You can check and adjust this via the front panel of the printer in most cases and trivia: the printer Web server integrated.
  • Now, with network connectivity guaranteed webservices icon or (depending on model) and try to activate Web services.
  • If you have managed to connect and a leaflet printed, or at the very least, an [email protected] address is displayed on the front panel of the printer, perfect, Web services are now functional. This means that you can now ask your HP printer connected , or use one of the above characteristics *.

  Note that ePrint and scan to e-mail feature are addressed later in this post if you still need help with these functions.

  • If the webservices are always not, try your printer restore default*.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom @hpeprint.com address that it will be permanently deleted. For more information on custom addresses ePrint, click here.

  Here's how:

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings
  • Note this new printer may contain this setting under the heading maintenance of the printer instead of tools.

  Then, to reconnect to your network (wired or wireless) and try to set a manual DNS:

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer), and then press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  Then, press the icon of Webservices or and reactivate your webservices (required for scanning to E-mail, ePrint , and other functions).

  Then, if a scan to e-mail question has led you to this position, tap the scan icon and enter the email address that you want to scan to.  Then, recover the PIN code that you should automatically receive by e-mail and complete your scan to E-mail setup by entering this PIN code in your printer.  Ideally, if you are able to get this good service will be fully functional.

  Alternatively, if ePrint is your main problem and all the above (except for scanning to E-mail steps) suggestions worked, try emailing your printer a print job. If it prints correctly, ePrint is back online. If you are a user of HP ePrint app, the app did automatically detect your printer? If not, go to the application settings and manually add your printer to the app using either ask you code or IP address of the printer. Finally, if you're a printable, user use your favorite applications on the front panel of the printer, or via HP connected.

  There are advanced troubleshooting steps beyond what I posted here and you can find them in the Forum such as displayed by the employees, Experts and members of the community. Start with the basics and if you still can't not to take advantage of Web services from your printer don't be shy to reach out - HP Support Forum's is a great place to exchange ideas and help each other to get the most out of our products.

  Thank you for taking the time to read. If you have any questions or comments do not hesitate to answer.

  All the best,

  Greetings,

  All new users to check in this thread, the first and the main post is a practical resource for webservices connectivity solutions.

  Try all the steps to recommend, as appropriate - if you encounter any problems apart from this I'll be happy to help you.

  Kind regards

• ALL the icons have disappeared in the printers and Faxes folder

  A network all Windows XP Pro with a server and 5 workstations were ALL icons in the printers and faxes on ALL machines records disappear.  Add a printer does not work, however, they can still print. for local printers and network.  GO FIGURE.  All the computers are on the SP3.

  Tried everything short of reinstalling XP on the server... running anti-virus and anti-malware scans, registry fixers running, restart the print spooler, all XP updates, etc.

  Unless someone comes up with something else that I have not tried before reinstalling XP on the server from scratch, this is my next step.

  Thank you
  Don
  E-mail address is removed from the privacy *.

  He is missing, damaged or the wrong version or other files which depends on the printui.dll is missing or damaged, or incompatible.  You can do a sfc/scannow, it should correct the problem if it's one of the files, click here to learn more about the System File Checker: http://support.microsoft.com/kb/310747

  If sfc/scannow does not solve things not try this:

  Is the file in the System32 folder, but Windows File Protection may not allow to replace, try this:

  1 - a copy of printui.dll should be found in the \WINDOWS\ServicePackFiles\i386 folder.

  2. rename the one in \WINDOWS\system32\dllcache printui.dll.old and then copy the folder \WINDOWS\ServicePackFiles\i386 for the dllcache folder.

  3 remove the printui.dll file in the \WINDOWS\system32, PAM will be replaced by the one that you have most recently in the dllcache folder.

  John

• My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

  My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

  Printer in Windows problems
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

  J W Stuart: http://www.pagestart.com

• Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Does anyone have recommendations?

  The original charger is International, all you need is a converter of pin code.

• HP printer D110a not on display upward on printers and Fax (Mac)

  Hello!
  
  It is the question of my friend.  Using iMac
  
  We have both the HP D110a wireless printer. I was able to implement the mine without any problems, but my friend is not able to get the printer appears under print & fax.
  
  When I set up my printer she stood and used Hello. My friend can't get Hello appears. I have older iMac (2006) and it has new iMac (2010)

  It is using snow Lep. 10.6.5

  Someone, please help?
  
  Thank you
  Jamie

  First of all, let's reset the printing system:
  
  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• My new HP Officejet 6500 a does not appear in the printers and faxes

  The HP Officejet 6500 a printer is a wireless all-in-one with fax, print, copy, scan.  I don't intend to use the fax and who did not put in place.  But what displays in the start menu > printers and faxes is the fax but not the printer.  So I can't select it is my default printer.  This is the main problem.

  Which is OK - when I print (with the help of this device or another my printer), since the print page I can select which printer to use and as well the new printer and fax are displayed here.

  Misc info: my other (old) printer is HP psc 1300 all in one, is not wireless and includes a fax machine.
  I have Windows XP SP 3 v.2002.

  Hi desert Ginny,

  I suggest you to install the drivers by downloading it from the following HP support link and check if it helps:

  Download drivers - HP Officejet 6500 has e-all-in-One Printer series

  Also, take a look at the following link:

  Failed to configure a network printer by default for all Windows XP users

  I hope this helps.

• Receive no printers installed error when you try to print. There is still printers, and one has been defined as the default value.

  We have seen an increase in the number of calls from customers indicating that when they try to print from Outlook 2007 (Windows XP SP3 + all updates), they receive an error indicating that there is no installed printer.  However, they have not only more than one printer installed, but they also have a default printer set.  Restart the print spooler solves this problem, but it is not clear what caused its all first.  When we stop and possibly restart the spooler, we notice that for a while, it crashes when stop and the following appears in the event viewer:

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7011
  Date: 10/20/2009
  Time: 09:38:48
  User: n/a
  Computer: XX-YYY-123456
  Description: Delay (30000 milliseconds) waiting for a response from the spooler service transaction.

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7011
  Date: 10/20/2009
  Time: 09:39:18
  User: n/a
  Computer: XX-YYY-123456
  Description: Delay (30000 milliseconds) waiting for a response from the service transaction.

  Related to this, last week we received a number of calls from users telling us their machines suspended once during the logon process to enter their credentials.  Even 20 minutes of waiting does not solve the problem and restart the machine took care of her.  We have a long login script so I added the lines that surround and inside the different functions, calls, WMI queries etc. within a specified period that he might be the cause of the problem.  Turns, when the script got to the point where he enumerated the list printers, he hung the machine.  (The code below at the bottom.)  Once this comment out code, users were connecting to fine, and the same timeout error preceding appeared in the login script.  What gives!

  Sounds to me as we have a problem of possible spooler, but outside the removal & time printers and their drivers, I'm not sure where to look, or why it affects only a small percentage of our population and more importantly again, suddenly.  I'm open to suggestions.

  * Excerpt from Login Script
  login_printer_list = «»
  Set colSettings = objWMIService.ExecQuery ("" Select * from Win32_Printer ' ")
  "I already had a 'debug' function that will write to a log file
  "just prior to each registration statement."  Then the newspaper
  "appearing on line indicating he was beginning the process..."
  For each objWMI_Item in colSettings
  "It was not anything beyond the code above in the process."  Where this
  "comment is, I got another line, where he would be out
  ' objWMI_Item.name in the debug log.
  login_printer_list = login_printer_list & "-" & objWMI_Item.name
  If objWMI_Item.Default = True Then login_default_printer = objWMI_Item.name
  Next
  -EOF

  Any help is greatly appreciated.

  --
  Julius G. Perkins, IV
  Enterprise systems
  Architect job

  Please click on the link for the information below:

  http://support.Microsoft.com/default.aspx/KB/811428
  MOEEN AJAZ KHAN MD - MCP/N + / A +.

• How to: Restore my back of laptop for buying condition, remove Google and all add ons

  Original title: Restore my back of laptop for buying condition, remove Google and all add ons

  Vista
  Inspiron 1525
  Centrino Inside
  Reference Dell
  Laptop
  2008
  Delete all the shortcuts, folders, data of the necessary United Nations
  system restore

  Hello

  As you ask here, you don't have a recovery disk.

  Here's how to access the Dell recovery hard disk partition and put your computer about how you bought.

  ATTENTION: All your data and programs that you have installed will be wiped from the drive hard as you do this. so back up your data. Programs will need to be reinstalled.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  See you soon.

• my dvd/cd drive and all other removable drives are more recognized since an update from microsoft

  I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can I fix it? I contacted Microsoft and back an email that I had to PAY for technical support to resolve this issue. Which seems hardly fair since there was an update on their part that messed up my laptop. I have a Gateway MX8738 with Vista Home Premium. I have not seen the error messages it just that there is no CD/DVD drive installed and when I check in my computer the only things that are displayed are the drives C and D.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
  course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
  as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.