Printers HP Deskjet 1510: ADD ANOTHER PRINTER HP SOLUTION CENTER

Similar Questions

• How can I add a printer "HP Solutions Center"?

  I have two all-in-one - one at work and one at home.  Two printers (a J6500 and a J6400) used to appear in the "HP Solution Center".  I got a new computer and now I can print on both computers, only the 6500 appears in the solution Center.  How can I add the 6400 to my 'Solution Center'?

  When you have installed the printer software you have the option "add a device"? Otherwise you can try to re - run the software of the printer to see if it gives you the option 'add a device '. This option will add the printer in the HP Solution software.

  Good luck!

  SeanS

• LAN printer prints not - need to remove and add another printer to obtain a paper copy. Intermittent problem.

  LAN printer prints not - need to remove and add another printer to obtain a paper copy. Intermittent problem.

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Deskjet 1510 - will not print?

  Hello

  Recently I bought HP Deskjet 1510, but it will not be printed.

  When I click on print a word document, it goes into the queue but then disappears after a few seconds - and the printer does nothing.

  I tried troubleshooting, but it is said that there is no problem. I've loaded everything that was on the CD that came with the printer and bought the right USB cable, so have no idea why it does not print... Everything works fine (scan, copy)...

  Any help would be much appreciated!

  I discovered that it was nothing wrong with the printer, just with my computer. Has had enough of trying to solve problem so abandoned my computer windows7 and bought a new printer and windows 8.1 works perfectly. see you soon

• DeskJet 1510: deskjet 1510 does not print

  I just bought it. I've tried printing photos and docs, but I received nothing, not even the roll paper. When I hit the "print" button in any software, I can see the task in the print queue. a few seconds later, the task has disappeared and the printer did nothing.

  power on, data cable is connected, because press the HP utility test, it displays a test page.

  hope you know my English. Please help me, thank you

  Hi @mayagamer

  Did you install the full feature software and driver for the Deskjet 1510? I will be putting together a series of measures for you answer and in the end, you should be able to print

  Please follow the following steps;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Deskjet 1510 - two-sided printing

  I can't print both sides. Quite true settings. But I don't check duplex function. How do I book? My OS is Windows XP 32-bit.

  The printer HP Deskjet 1510 cannot perform automatic duplex printing, it must be done manually. I'll tell how you to print double-sided of the Microsoft Word application. The same procedure can be used to print from other applications:

  To print a single document Page 2 faces:

  (1) load a single sheet of paper in the input tray.

  (2) open the Microsoft Word document and choose file > print.

  (3) in the print window, enter 1 next to the pages option.

  (4) click on print. This example displays the first page of the document.

  (5) turn the printed page and place it in the tray.

  (6) now print the second page by following steps 1-3 above and who enters the 2 next to the option pages.

  To print a document of several Page 2 face:

  (1) load a stack of media or the number of sheets needed for the print job in tray.

  (2) open the Microsoft Word document and choose file > print.

  (3) now, print all the odd numbered pages of the document first. To do this in the print, enter all the odd numbers next to option pages separated by commas. Ex: If you have a 6 page document, enter 1,3,5 next to the section pages.

  (4) click on print and will print the odd pages.

  (5) then, take the stack of printed pages, flip and load it into the input tray.

  (6) now print even pages by following steps 1-3 above and enter all the numbers next to pages option: separating with comma. Ex: If you have a 6 page document, enter 2,4,6 next to the section pages.

  (7) click on print and will print the even pages.

  I hope this helps.

• Officejet Pro K5400 printer - no solution center or equivalent on MAC

  I have a new iMac running OS x 10.9.3. During the process the K5400 printer in network has been found, drivers downloaded and everything seems to work fine. However there is no center of Solution being present on my Windows system, and if there is a HP Applications folder on my Mac, I can't find. I used the Solutiuon Center to check the ink level and other things.

  Question: is there a center of Solution for Mac and if is not there and equivalent and if not (one might wonder why not!) How to find things on this printer from my Mac, not having to go to the porinter in another part of the building.

  Thank you in advance for an answer!

  I found the answer to this problem, I asked. Apologies for experienced Mac users who I am sure that already know such things, but as a new convert Windows I don't have and this info can be useful similar folk.

  Click on Preferences system-> printers and Scanners-> the listed HP printer you want information on-> them status will take you to a set of options that will do everything that was available in the HP Windows solution Center.

  It is excellent and can work for another fact of printer--I know I do not have!

• DeskJet F2480: 10 Windows upgrade now solution Center will not launch

  Since the upgrade to win 10, the F2480 prints and scans by using the built-in windows scan software. The printer is USB connected. The HP Solution Center software will not start. Uninstalled and reinstalled with software downloaded from AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe HP.

  Is it installed then when check USB it does not find the printer. Device Manager sees and scan OK. Where to go from here. ?

  Hello

  Appears from the description that the full features software is not installed.

  Can you download from this link and try to install again?

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F2400-all-in-one-series/3811093/model/3811136#Z7_3054ICK0K8UDA0AQC11TA930O2

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• B110 series printer: HP Solution Center suddenly does not work

  The HP Solution Center has suddenly stopped working.  The notice says that he cannot work because the device is not over...  It was not a problem in the past (and I'm on Windows 10 months) and I don't have no problem with printing a document, but can not scan - from the solution center or the printer to the PC.  I have uninstalled and installed the drivers twice and also removed a recent update of security Microsoft as advised in a single site, but nothing helped.  The printer is a B110 series and I am on Windows 10.

  Welcome to the Forums of HP @HV2, I'd be happy to help you get your Solution Center works again. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When address us the issue, I would you kindly mark the appropriate post as accept as Solution so that others have the same or similar problem can find what worked for you.

  Even if you have already uninstalled and reinstalled the software, I suggest you to perform an uninstall, but with a different approach. Please use the following steps to perform a complete uninstall:

  1. Hold down the Windows Logo key on the keyboard and the 'R' to open the dialog box run, type % temp %
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_WW_140_408 - 5.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the Util folder
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have acomputer no HP , run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec / unregister, and then click OK.
  • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run
  • In the Open box, type msiexec/regserver, and then click OK

  * Note: there is a space between the c and the /.

  If you do not at this stage, use this link to perform another way. Restart Windows install

  1. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup
  2. Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
  3. Restart the computer
  4. Download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  If you cannot complete any of these steps, please stop and after back to let me know where got stuck you. Skip a step and continue to the next step won't do what it takes. If you get stuck, I'll help you through it.

  I look forward to hearing back from you with the results of your efforts. Thank you.

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• Harm my printer HP Solution Center is disconnected

  HP officejet 6000 cb051 windows vista 32-bit.  After the initial installation, I had a problem with the printer print an alignment page after printing ever.  My only support free call and they had me do a uninstall3, then reinstall used.  The printer prints very well now, without printing an alignment page after each print job.  But now the hp Solution Center says that my printer is disconnected.  I tried to turn it off, wait a while, then on again.  But it does not help.  This limit problem help I can get from the solution Center.  Help, please.  I'm a novice!

  susana1027

  I solved my problem!  Since I had just installed this printer, it had not occurred to me that there might be updates.  But there was.  I downloaded the updates and the problem was solved!

• How can I add another printer

  When I want to print from firefox, my default printer is not listed. How can I add it to the list of available printers?

  Perform a reset to the settings of your printer, as shown here:
  https://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox#w_reset-Firefox-printer-setting

  Then after restarting Firefox check if your default printer is listed.

• printers HP 7610 stops at halfway printing or returns error on win8.1 (wireless configuration)

  Help please...  Just got the printer large format 7610 a few days ago and installed everything fine on win8.1 from the CD and select the wireless option.

  All right, except if I try to print one full photo page, or something other than a small photo or a document.  The printer stops printing before it's over or a useless error message on the screen saying "printing error on HP Officejet 7610 Series (network).  With no other info.

  Sometimes the picture full page prints completely, but after a delay of 10 seconds, the error message appears on the computer.  It's as if the computer has not received a "finished printing" status message of the printer.  Maybe after a time-out period, it displays the message, assuming that there is an error with printing.  Basically, the handshake seems wrong.

  I tried to print from several programs, such as Picasa and Irfanview.  I disabled my anti-virus software too.  I enabled the discovery of the public and private network and printer and file sharing too.

  But... If I go to control panel > printers and peripherals > and select "add a printer".  And add another printer 7610 (which only allows you to select the driver "7610 series class driver"), this second printer (with the "class driver") will not get the error.  However, this printer has all the options of paper and some other features of the 7610 printer selection.  This second printer uses a "TCP/IP Port", not a "WSD" port as the (network) install uses.  So the question is somewhere with WSD port / protocol services device, which uses the installation of the HP printer on the CD of the web site.

  7610 (wireless network - using the WSD port) printer driver seems to have a major problem.  Help, please.  I can't print the large 13 x 19 even images I got this printer, since it will not be printed a large full photo.  The wireless communication protocol or the Protocol seems terribly flawed.  I use 802.11 WPA - PSK with high quality signal (first level 5).

  Thanks for any immediate help or clues.  I went through all the normal stuff.  verified that all software are up-to-date.  There is no firmware downloads available, the firmware in the printer is the most recent.  powered and on all 3 devices (printer, router, pc).

  ... Edit... The only solution I came with is go to control panel > display devices and printers > right click on the printer, select the printer properties > Ports tab and change the "WSD" port to one of the unused ports "TCP/IP".  This causes a second printer to add to the list of printers.  In this way, I have media and the paper size options.  But I'm afraid I've lost all the features that come with using WSD port peripheral, such as scanning, web services etc..

  It is the only solution to this problem that worked for me. Why it has not been resolved by HP after all this time I'll never know.

  http://troubleshooting201.rssing.com/browser.php?indx=14839819 & Item = 2327

  More specifically - that part of the above page, it is what solves the problem-
  
  Find out what IP address, is that your printer uses.
  Go to control panel, then click "View devices and printers."
  Look for your printer right click.
  Click on "Printer properties" and a new screen opens.
  Along the top, you will see some tabs. Click on the one that says "Ports".
  Click on 'Add Port '.
  Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen opens.
  Click "next".
  Type the IP address of your printer, and then click "next".
  Your computer should find your printer.
  Click 'Apply' and your printer should work fine.

• DeskJet 2050 does not print post format more?

  Hello

  DeskJet 2050 all-in-one

  Win 7

  I had HP printers for years and all my other printers had a setting in the sofrware who would let you print impressions in format post on multi sheets of pf you would then tape together. I find that on my new printer. I used this setting a lot and now find I need it again and I don't know what to do?

  Susan

  Hi Susan,.

  The print feature post is more provided by the most recent drivers.

  However, you can still use the feature using an Alternative driver as a workaroud:

  First step: check the current printer port.

  Enter Control Panel > devices and printers.

  Right-click the printer icon, and then click printer properties.

  Click on the Ports tab, and take note of the track selected for your printer.

  Step 2: Adding a pilot alternative:

  Enter Control Panel > devices and printers.

  Click Add a printer.

  Click Add a local printer.

  Leave the Port of existing use marked, select the port used by your printer from the drop-down list, and then click Next.

  Click the Windows Update button, leave a few minutes to complete the update process up to what the list printers appear again.

  Select HP in the Manufactor Colum

  Select HP Deskjet 6940 series / HP Deskjet series 6980, and then click Next.

  Follow the steps to complete the wizard and then print using the configuration newly driver printer that includes the desired option.

  Kind regards

  Shlomi

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.